1/45
Looks like no tags are added yet.
What is a one-compartment open model?
The simplest way to describe absorption, distribution, and elimination
using one uniform compartment
constant apparent volume of distribution (VD).
net rate equation of PK
Rate in - rate out = rate of drug in body
how do u find t when Cp =0
t is ZERO at Cp
=0
What happens during the absorption phase of oral single dose one compartment modeling
rate in > rate out
DGI>DE
What happens at peak concentration of oral single dose one compartment modeling
Rate in = rate out
DGI=DE
What happens during the Postabsorption Phase during oral single dose one compartment modeling
Rate out > rate in
DE>DGI
What happens during the Elimination Phase during oral single dose one compartment modeling
Rate in = ZERO
DGI= ZERO
DB=-kDB
What are the limitations of the one-compartment model?
It predicts plasma drug concentration (CP) versus time but does not describe drug distribution within specific tissues.
What are the major assumptions of the one-compartment first-order PO model?
- Body acts as one uniform compartment with constant Vd
-Absorption is initially much faster than elimination (ka >> k)
-Absorption is first-order with respect to conc of drug at site of abs
-ka is constant
-Drug distribution/mixing is instantaneous.
- Elimination begins immediately after administration and is first-order.
What is the difference between an IV bolus and PO one-compartment model?
-Absorption is initially much faster than elimination (ka >> k)
-Absorption is first-order with respect to conc of drug at site of abs
-ka is constant
What does first-order drug absorption mean?
The rate of absorption is proportional to the amount/concentration of drug remaining at the absorption site. The absorption rate decreases over time as the amount of drug in the GI tract decreases.
How does the absorption rate change over time with an immediate-release dosage form?
- Starts at its maximum rate.
- Decreases over time as drug concentration at the absorption site decreases.
- Eventually approaches zero as the available drug is absorbed.
T/F in immediate release the entire drug dose is released over a short period of time
True
T/F drug absorption at the absorption site can be saturated
False (sink)
What are sink conditions in drug absorption?
Drug absorption at the absorption site cannot be saturated. Changes in drug concentration at the absorption site continuously change the rate of absorption.
What is the difference between ka and k?
- ka = First-order drug absorption rate constant (drug entering systemic circulation)
- k = First-order drug elimination rate constant (drug leaving systemic circulation).
What is the significance of ka >> k in the one-compartment PO model?
Absorption initially occurs much faster than elimination, allowing drug concentration in the body to increase.
What are the three major phases of the plasma concentration-time curve after PO administration?
1. Absorption phase
2. Postabsorption phas
3. Elimination phase
What is F in one compartment PO?
F is fraction of dose absorbed
At C max Cp is
constant
During the absorption phase, how do the rates of drug absorption and elimination compare?
Rate in (absorption) > rate out (elimination).
What happens at Cmax (maximum plasma drug concentration)?
Rate in = rate out. Drug concentration is no longer increasing, and the net rate of change in plasma concentration is zero.
What happens during the postabsorption phase?
Drug absorption is still occurring, but the rate of elimination exceeds the rate of absorption. Plasma drug concentration decreases.
What characterizes the elimination phase?
Very little drug remains available for absorption from the GI tract. Drug elimination is the primary process determining the decrease in plasma concentration.
What is Cmax?
The maximum plasma drug concentration reached after administration.
What is Tmax (tmax)?
The time required to reach maximum plasma drug concentration (Cmax).
What happens when ka increases while k stays constant?
- Cmax increases
- Tmax decreases (reaches peak concentration sooner).
-AUC does not change.
What happens when k increases while ka stays constant?
- Cmax decreases
- Tmax decreases.
- AUC decreases.
What does AUC represent, and what does it measure?
Area under the plasma concentration-time curve. It represents total systemic drug exposure.
How do you determine the elimination rate constant (k) from PO plasma concentration-time data?
1. Plot plasma concentration versus time on a semilog graph
2. Identify the terminal elimination phase.
3. Use data points occurring after Tmax.
4. Determine the slope of the terminal elimination line.
What is the relationship between the slope and k when plotting ln CP versus time?
Slope = -k
What must you do differently when determining k from a log10 CP versus time graph instead of an ln CP versus time graph?
The slope is -k/2.303, so: k = -2.303(slope)
What is the y-intercept used for when determining the PO first-order equation?
The y-intercept provides A, which is used with k to establish the elimination component of the PO concentration-time equation.
When plotting ln CP versus time, how do you obtain A from the y-intercept?
Take the natural antilog of the y-intercept: A = e^(y-intercept)
When plotting log10 CP versus time, how do you obtain A from the y-intercept?
Take the base-10 antilog: A = 10^(y-intercept)
Why can't you use the terminal elimination line alone to determine ka?
The terminal elimination line provides k and A, but the absorption rate constant (ka) must still be determined using the residual method.
What is the residual method used to determine?
The first-order absorption rate constant (ka).
What are the steps for plotting residuals to determine ka?
1. Plot CP versus time on a semilog graph.
2. Extrapolate the terminal elimination line backward.
3. Select at least 3 points on the extrapolated line during the absorption phase.
4. Determine the corresponding actual plasma concentrations at those times.
5. Calculate residuals: extrapolated CP - actual CP.
6. Plot the residuals and extrapolate the line.
7. Use the slope of the residual line to determine ka.
How do you calculate a residual?
Residual = C'P - CP\n\nWhere:\n- C'P = Extrapolated plasma concentration from the elimination line.\n- CP = Actual measured plasma concentration.
Why must you use at least 3 points when plotting residuals?
To establish the residual line and determine the absorption rate constant (ka) from its slope.
What information is needed to predict plasma drug concentration at any time after PO administration using the one-compartment model?
- Bioavailability (F)
- Dose
- Apparent volume of distribution (VD)
- Absorption rate constant (ka)
- Elimination rate constant (k)\n- Time (t)
What are the two rate constants needed for the PO first-order one-compartment model, and how are they determined from concentration-time data?
- k: Determined from the slope of the terminal elimination phase.
- ka: Determined using the residual method.
How is Cp vs t plotted
On a semi log graph
Once you have determined k, ka, and A, what can you do?
Establish the first-order PO pharmacokinetic equation and predict plasma drug concentration at any time after oral administration.
One-comparment po model if does increases Tmax...
stays the same
T/F When plotting residuals take 3 Cp points on the Extrapolated line
True!