1/25
Vocabulary flashcards covering fluvial processes, river channel morphology, sediment transport mechanics, and flood management concepts.
Fluvial Processes
River processes or processes associated with stream channels (derived from the Latin word for river), including sediment erosion, transportation, and deposition.
Driving Force (Fluvial)
The shear stress exerted by flowing water (τ=ρwgDS) that entrains and transports sediment along a channel.
Resisting Force (Fluvial)
The shear strength or resistance of the bed and bank-forming materials that works against the driving force and slows erosion.
Stream Power
The rate of potential energy loss per unit channel length, defined by the formula Ω=ρwgQS, where ρw is water density, g is gravitational acceleration, Q is discharge, and S is channel slope.
Stream Discharge (Q)
The volume of water flowing past a point on a stream per unit time, calculated as Q=A×Vel or Q=W×D×Vel, expressed in units such as m3s−1.
Stream-Gauging Station
An installation that measures the cross-sectional area (Ac), depth, and average flow velocity of a stream.
Base Level
The lowest elevation that a stream channel's surface can reach at a given locality, below which the stream cannot erode.
Average Stream Velocity Depth
The vertical position in a channel—measured at approximately 0.6 of the depth from the water surface—where flow velocity matches the average velocity of the stream.
Meandering Channels
Single-thread, low-gradient stream channels that are deep and narrow with few islands and a sinuosity greater than 1.5.
Braided Channels
Multiple-thread, low-sinuosity channels characterized by high flow, coarse gravel deposits, and unvegetated bars that choke the channel during normal flow.
Anastomosing Channels
Multiple-thread (anabranching) stream channels characterized by vegetated islands, narrow and deep individual channels, and low gradient.
Alluvial Stream-Channel
A stream channel whose bed and banks are composed entirely of alluvium—unconsolidated sediment that has been transported and sorted by river flow.
Bedrock Stream-Channel
A stream channel that cuts directly into solid rock and flows over bedrock, occasionally covered by only a thin veneer of alluvium.
Scouring
A mechanical erosion process where running water removes loose sediment and rock fragments from the channel bed and walls.
Abrasion
The mechanical grinding and wearing away of the channel floor and walls caused by sediment-laden water acting like sandpaper.
Dissolution
A chemical erosion process in which flowing water dissolves soluble minerals directly from the surrounding rock or sediment.
Saltation
A bed-load transport mechanism where grains (such as sand, pebbles, or cobbles) bounce along the bed following curved trajectories, dislodging other grains upon impact.
Natural Levees
Elongated sediment ridges deposited along both banks of a river channel as floodwaters overflow the banks and rapidly decelerate.
Point Bar
A crescent-shaped accumulation of sediment deposited along the inner bank of a meander bend where water velocity is lowest during normal flow.
Alluvial Fan
A wedge- or arc-shaped deposit of sediment formed where a high-gradient stream exits a narrow canyon or valley onto a flatter plain.
Delta
A fan-shaped accumulation of sediment formed where a sediment-laden stream enters a standing body of water, such as a lake or ocean.
Flooding
An overbank flow condition that occurs when stream discharge exceeds the capacity of the channel, causing water to inundate normally dry land.
Impervious Surface
An artificial surface, such as pavement or roofing, that prevents water infiltration into the ground, substantially increasing surface run-off and urban flood hazard.
Recurrence Interval (RI)
The average time span between natural hazard events of the same magnitude, calculated as RI=rN+1, where N is the number of observation years and r is event rank.
Annual Exceedance Probability (P)
The likelihood that a flood of a specified magnitude will be equaled or exceeded in any given single year, given by P=RI1.
Artificial Levee
An earthen embankment constructed along a river to contain high water levels within the channel and prevent flooding of adjacent lowlands.