Chapter 10 - Radio Communications

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/20

encourage image

There's no tags or description

Looks like no tags are added yet.

21 Terms

1
New cards

A __________ is a two-way radio that is small enough for a firefighter to carry at all times. (Page 220)

A) base station radio

B) mobile radio

C) personal radio

D) portable radio

D) Portable radio.

A portable radio is a two-way communication device small enough for a firefighter to carry while performing duties. It allows firefighters to communicate with other crew members and command personnel while moving around an incident scene.

Portable radios are essential for maintaining situational awareness, coordinating operations, and reporting emergencies.

A) Base station radio: A fixed radio installed at a dispatch center or other stationary location.

B) Mobile radio: A radio installed in a vehicle, such as a fire engine.

C) Personal radio: A general description that is not the specific standard term used in this question.

Study Tip

Remember the difference:

Portable = carried by a firefighter.

Mobile = installed in a vehicle.

Base station = stays in a fixed location.

Think: If you can carry it with you on the fireline, it's portable!

2
New cards

Usually, when a portable radio starts to __________ during an attempt at transmitting or the receiver provides feedback that you seem to be cutting out on the radio, chances are the battery on the radio is out of power. (Pages 220-221)

A) turn off

B) malfunction

C) squawk

D) chirp

D) Chirp.

A portable radio may chirp or emit an audible warning when its battery is low. You might also notice poor transmission quality, such as your voice cutting out or the receiver reporting that your transmission is breaking up.

Firefighters should check their radio batteries before an assignment and carry spare batteries when appropriate to maintain reliable communication during emergencies.

A) Turn off: A radio may shut down when its battery is depleted, but this does not describe the warning sound mentioned in the question.

B) Malfunction: This is a general term for equipment that isn't working correctly, not the specific sound described.

C) Squawk: Usually refers to a short, harsh sound or burst of radio noise, not the typical low-battery warning described here.

Study Tip

Low battery = chirp!

Before responding to an incident, check your portable radio's battery level to help ensure you can communicate when it matters most.

3
New cards

Though there are many types of portable radios, the most common in the wildland environment is the: (Page 221)

A) Bendix King Radio.

B) Motorola Radio.

C) base station radio.

D) portable radio.

A) Bendix King Radio.

The Bendix King (BK) radio is commonly used in the wildland firefighting environment for communication between firefighters, crew leaders, and incident command. These radios are designed for field use and support communication on assigned firefighting frequencies.

B) Motorola Radio — Motorola also makes radios used by emergency responders, but it is not the answer this question is looking for.

C) Base station radio — A fixed radio system, not the typical handheld radio carried by a wildland firefighter.

D) Portable radio — A general category of radio, not a specific make or model.

Study Tip

Remember: Bendix King = common wildland handheld radio

4
New cards

A __________ is a more powerful two-way radio that is permanently mounted in vehicles and powered by the vehicle's electrical system. (Page 221)

A) portable radio

B) Bendix King Radio

C) base station radio

D) mobile radio

D) Mobile radio

A mobile radio is a two-way radio permanently installed in a vehicle and powered by the vehicle's electrical system. It typically has more power than a handheld portable radio, allowing for greater communication range.

A) Portable radio: A handheld radio that can be carried by an individual firefighter and typically uses a rechargeable battery.

B) Bendix King Radio: A brand of radio equipment, not the general term for a vehicle-mounted radio.

C) Base station radio: A radio installed at a fixed location, such as a dispatch center or incident command post.

Study Tip

Remember the three main types:

-Portable = carried by a person.

-Mobile = mounted in a vehicle.

-Base station = stays in a fixed location.

Exam shortcut: If the question mentions a vehicle's electrical system, think mobile radio.

5
New cards

__________ radios are permanently mounted in a building, such as a fire station or remote transmitter site. (Page 221)

A) Mobile radio

B) Portable radio

C) Base station radio

D) Bendix King Radio

C) Base station radio

A base station radio is permanently installed in a fixed location, such as a fire station, dispatch center, or remote transmitter site. It is used to communicate with mobile and portable radios.

A) Mobile radio: Permanently mounted in a vehicle and powered by its electrical system.

B) Portable radio: A handheld radio carried by firefighters.

D) Bendix King Radio: A radio brand, not the general term for a radio permanently installed in a building.

Study Tip

Remember the three radio types by location:

-Portable = person

-Mobile = vehicle

-Base station = building

Exam shortcut: If the question says permanently mounted in a building, choose base station radio.

6
New cards

Radios work by broadcasting electronic signals on certain __________, which are designated in units of megahertz (MHz). (Page 222)

A) channels

B) radio waves

C) zones

D) frequencies

D) Frequencies

Radios transmit and receive signals on specific frequencies, measured in hertz (Hz) or megahertz (MHz). One megahertz equals one million cycles per second.

A) Channels: Designated communication pathways that use assigned frequencies.

B) Radio waves: Electromagnetic waves that carry radio signals, not the specific measurement being described.

C) Zones: Groups of channels organized for easier selection on a radio.

Study Tip

Remember: Frequency = cycles per second; MHz = millions of cycles per second.

Exam shortcut: When a question mentions MHz, think frequency.

7
New cards

A __________ is the number of cycles per second of a radio signal. (Page 222)

A) zone

B) radio wave

C) channel

D) frequency

D) Frequency

Frequency is the number of cycles per second of a radio signal. It is measured in hertz (Hz). For example, a signal with a frequency of 100 MHz completes 100 million cycles per second.

A) Zone: A group of radio channels or communication resources organized for selection.

B) Radio wave: The electromagnetic wave that carries the radio signal, not the measurement of cycles per second.

C) Channel: A designated communication pathway, usually associated with a specific frequency or frequency pair.

Study Tip

Remember: Frequency = how many cycles per second.

Frequency (Hz) tells you how often a wave repeats.

Higher frequency means more cycles per second.

Lower frequency means fewer cycles per second.

Exam shortcut: If you see "cycles per second," immediately think frequency.

8
New cards

__________ is a programming process that allows for the copying of frequency information from one radio and sending that copy to another radio to avoid manual programming. (Page 222)

A) Programming cloning

B) Radio copying

C) Code cloning

D) Radio cloning

D) Radio cloning

Radio cloning is the process of copying programmed frequency and channel information from one radio to another compatible radio. This saves time and avoids having to program each radio manually.

A) Programming cloning: Not the standard term for this process.

B) Radio copying: An informal phrase, not the commonly used technical term.

C) Code cloning: Not the standard term for transferring radio programming information.

Study Tip

Remember: Cloning = copying settings from one device to another.

For wildland firefighting radios, cloning allows multiple compatible radios to share the same programmed channels and frequencies without programming each one individually.

9
New cards

A __________ is an assigned frequency or frequencies used to carry voice and data communications. (Page 223)

A) radio channel

B) duplex channel

C) radio frequency

D) simplex channel

A) Radio channel

A radio channel is an assigned frequency or set of frequencies used to carry voice and data communications. It allows radios to communicate using designated communication settings.

B) Duplex channel: Uses separate frequencies to transmit and receive signals, allowing communication in both directions.

C) Radio frequency: The electromagnetic signal's frequency, measured in units such as megahertz (MHz), rather than the designated communication pathway.

D) Simplex channel: Uses the same frequency for transmitting and receiving, typically allowing one person to transmit at a time.

Study Tip

Remember: Channel = communication pathway; frequency = cycles per second.

Simplex: One frequency; usually one person transmits at a time.

Duplex: Separate transmit and receive frequencies.

Radio channel: The assigned communication resource used to carry messages.

Exam shortcut: If the question says an assigned frequency or frequencies used for communication, choose radio channel.

10
New cards

The most common function of simplex channels on a portable radio is: (Page 223)

A) push to listen, release to talk.

B) short range.

C) long range.

D) push to talk, release to listen.

D) Push to talk, release to listen.

A simplex channel typically allows communication in one direction at a time using the same frequency for transmitting and receiving. On a portable radio, you press and hold the push-to-talk (PTT) button to speak, then release it to listen for a response.

A) Push to listen, release to talk: Reverses the normal operation of the push-to-talk button.

B) Short range: Simplex communication can be limited by range, but short range is not its primary function.

C) Long range: Simplex channels do not inherently provide long-range communication; range depends on factors such as power, terrain, and obstructions.

Study Tip

Remember PTT = Push To Talk.

Press the button → Talk.

Release the button → Listen.

Exam shortcut: If a question asks how to operate a portable radio, remember: Press to talk, release to listen.

11
New cards

When information is relayed on the same frequency on simplex channels, it is: (Page 223)

A) short range.

B) multi-directional.

C) one direction only.

D) long range.

C) One direction only.

A simplex channel uses the same frequency to transmit and receive messages. Communication occurs in one direction at a time—one person transmits while the others listen. The other person responds after the first person stops transmitting.

A) Short range: Simplex communication may have limited range, but that does not describe the direction of communication.

B) Multi-directional: Simplex radios cannot transmit and receive simultaneously on the same channel.

D) Long range: Range depends on radio power, terrain, antenna placement, and other factors—not simply whether a channel is simplex.

Study Tip

Remember: Simplex = same frequency, one person talks at a time.

Exam shortcut: When you see same frequency and simplex, think one direction at a time.

12
New cards

One of the benefits on a simplex channel is that: (Page 223)

A) there is slight delay.

B) there is a pause in radio communication.

C) there is no delay.

D) everyone can all talk at once.

C) There is no delay.

A simplex channel allows radios to communicate directly on the same frequency without requiring a repeater to relay the signal. This avoids the additional delay associated with repeater processing, making communication straightforward.

A) There is slight delay: A delay is not a typical benefit of simplex communication.

B) There is a pause in radio communication: Users must take turns transmitting, but this is a limitation of simplex communication, not a benefit.

D) Everyone can all talk at once: Simplex communication generally allows only one person to transmit at a time on the same channel.

Study Tip

Remember: Simplex = direct communication, same frequency, one person talks at a time.

Exam shortcut: If the question asks for a benefit of simplex communication, look for no repeater-related delay.

13
New cards

A __________ is a special base station radio that uses two separate frequencies—one to receive and one to transmit messages. (Page 224)

A) special operations portable radio

B) stationary base radio

C) base station

D) repeater

D) Repeater

A repeater is a special type of base station radio that receives a signal on one frequency and retransmits it on another frequency. Repeaters help extend radio communication range, especially in areas with hills, mountains, or other obstacles.

A) Special operations portable radio: A handheld radio used by personnel, not a fixed system that receives and retransmits signals.

B) Stationary base radio: A fixed radio system, but not necessarily one that retransmits messages on a separate frequency.

C) Base station: A radio system installed at a fixed location; this is a broader category than a repeater.

Study Tip

Remember: Repeater = receives, then repeats.

-Receive: One frequency.

-Transmit: A different frequency.

-Purpose: Extend communication range.

Exam shortcut: If a question mentions two separate frequencies and retransmitting a signal, think repeater.

14
New cards

__________ allow both parties to send information simultaneously without any interference, such as when using a cell phone. (Page 224)

A) Line of sight channels

B) Single duplex channels

C) Full duplex channels

D) Half duplex channels

C) Full duplex channels

Full duplex channels allow both parties to transmit and receive information simultaneously. For example, during a typical cell phone call, both people can speak and hear each other at the same time.

A) Line of sight channels: Radio communication that depends on a relatively unobstructed path between antennas; it does not mean both parties can transmit simultaneously.

B) Single duplex channels: Not the standard term for simultaneous two-way communication.

D) Half duplex channels: Allow communication in both directions, but only one party can transmit at a time, such as with a walkie-talkie.

Study Tip

Remember the difference:

-Simplex: One-way communication.

-Half duplex: Both ways, but take turns.

-Full duplex: Both ways at the same time.

Exam shortcut: If the question says simultaneously, choose full duplex.

15
New cards

__________ is the normal communication that is required in response to an incident, during an incident, and returning from an incident. (Page 225)

A) Plain text

B) Simple traffic

C) Priority traffic

D) Routine traffic

D) Routine traffic

Routine traffic is normal, everyday radio communication required before, during, and after an incident. It includes ordinary updates, status reports, and other nonurgent information.

A) Plain text: Refers to communicating in clear, understandable language without codes, not the priority level of a message.

B) Simple traffic: Not the standard term for normal incident-related radio communications.

C) Priority traffic: Communication that requires prompt attention because it is more urgent than routine messages.

Study Tip

Remember the difference between routine and priority traffic:

-Routine traffic = normal, nonurgent communication.

-Priority traffic = important information that needs prompt attention.

Exam shortcut: If the question describes normal communication before, during, or after an incident, choose routine traffic.

16
New cards

__________ is an urgent message that takes priority over all other radio communications. (Page 225)

A) Simple traffic

B) Priority traffic

C) Emergency traffic

D) Routine traffic

C) Emergency traffic

Emergency traffic is an urgent radio message involving an immediate threat to life, serious injury, or a critical emergency. It takes priority over other radio communications so responders can address the emergency immediately.

A) Simple traffic: Not the standard term for an urgent radio message.

B) Priority traffic: Important communication that needs prompt attention, but it does not necessarily indicate an immediate emergency.

D) Routine traffic: Normal, nonurgent communication, such as status updates and general information.

Study Tip

Remember the three levels of radio traffic:

-Routine = normal communication.

-Priority = important and time-sensitive.

-Emergency = immediate threat or critical danger.

Exam shortcut: If a message takes priority over all other radio communications, choose emergency traffic.

17
New cards

LUNAR acronym helps agencies describe the situation and help needed in the event of an emergency. It stands for: (Page 225)

A) Location, Unit, Name, Assignment, and Resources.

B) Location, Unit, Name, Assignment, and Risks.

C) Last known assignment, Unit, Name, Location, Air, and Resources.

D) Location, Unit, Name, Air, and Resources.

A) Location, Unit, Name, Assignment, and Resources.

The LUNAR acronym is used in wildland firefighting to communicate essential information during an emergency so that responding agencies know who needs help, where they are, and what assistance is required.

L — Location: Where the emergency is occurring.

U — Unit: The crew, engine, or other resource involved.

N — Name: The name of the person reporting or needing assistance.

A — Assignment: The task or assignment the firefighter or crew is working on.

R — Resources: The assistance or resources needed.

18
New cards

One of the most important things to remember when operating a radio is this sequence: (Page 225)

A) push, talk, release.

B) pause, push, pause, talk, pause, release, pause.

C) talk, pause, release.

D) push, pause, talk, pause, release.

D) Push, pause, talk, pause, release.

When operating a two-way radio, follow the sequence push, pause, talk, pause, release.

-Push: Press and hold the push-to-talk (PTT) button.

-Pause: Wait briefly for the radio to activate and begin transmitting.

-Talk: Speak clearly and directly into the microphone.

-Pause: Finish your message and allow your words to transmit completely.

-Release: Let go of the PTT button so you can listen for a response.

A) Push, talk, release: Omits the pauses needed to ensure the radio is transmitting before you speak and to avoid cutting off the end of your message.

B) Pause, push, pause, talk, pause, release, pause: Adds an unnecessary pause before pressing the button; the standard sequence begins with pushing the button.

C) Talk, pause, release: Omits pressing the PTT button first, which is necessary to transmit on a typical handheld radio.

Study Tip

Remember: Push → Pause → Talk → Pause → Release.

Think of the pauses as protecting the beginning and end of your message from being cut off.

Exam shortcut: Always pause briefly after pressing PTT before speaking.

19
New cards

When you talk on a repeater, generally, there is a delay of about: (Pages 225-226)

A) 3 seconds.

B) 3 words.

C) 1 second.

D) 1 word.

C) 1 second

When transmitting through a repeater, there is generally a short delay of about 1 second while the repeater activates and begins retransmitting your signal. Waiting briefly before speaking helps prevent the beginning of your message from being cut off.

20
New cards

One of the recommendations that came out of the 9/11 Commission Report was for emergency responders to use: (Page 226)

A) 10 code messaging.

B) 12 code messaging.

C) emergency traffic.

D) plain language.

D) Plain language

One recommendation following the 9/11 Commission Report was for emergency responders to use plain language when communicating across agencies. Clear, standardized wording helps firefighters, police officers, and other responders understand one another, especially during multiagency emergencies.

A) 10 code messaging: Uses coded phrases that may have different meanings between agencies.

B) 12 code messaging: Not the recommended standard for clear interagency emergency communication.

C) Emergency traffic: Refers to urgent radio messages, not a communication style intended to improve understanding across agencies.

Study Tip

Remember: 9/11 Commission → Plain language.

Exam shortcut: When a question mentions communication between different emergency response agencies, think plain language instead of radio codes.

21
New cards

If you do have a long message to transmit, pause for 5 to 10 seconds after every __________ of transmission. Announce "break" between each transmission. This break will allow someone to chime in with emergency or priority traffic. (Page 226)

A) 30 seconds

B) 15 seconds

C) minute

D) 45 seconds

B) 15 seconds