1/59
Looks like no tags are added yet.
What are the four components of an ILS?
Localizer, Approach Lights, Glideslope, and Marker Beacons (Range)
What is the purpose of the initial approach segment?
Provide a method for aligning the airplane with the approach course
What is the purpose of the intermediate approach segment?
Designed primarily to position the airplane for the final descent to the airport
What is the purpose of the final approach segment?
Navigate on the final approach course safely to a point from which, if you have the required visual references in sight, you can continue the approach to landing or to the missed approach point if you do not have the visual references in sight.
What is the purpose of the missed approach segment?
Navigate away from the MAP to a point where you can attempt another approach or continue to another airport.
What is the normal slope of a glide slope signal?
3 degrees.
When may you begin to fly an instrument approach as charted?
When you hear "Cleared for approach" from ATC.
How is the Initial Approach Fix depicted on FAA Terminal Approach Procedures?
IAF
How is the Intermediate Fix depicted on FAA Terminal Approach Procedures?
IF
How is the Final Approach Fix (non-precision) depicted on FAA Terminal Approach Procedures?
A cross on the Profile View
How is the Missed Approach Point depicted on FAA Terminal Approach Procedures?
MAP fix, navaid, or elapsed time from the FAF
What does MSA stand for? What does it provide?
Minimum Safe/Sector Altitude. It provides 1,000 feet of obstruction clearance within 25nm of the indicated facility
What is the significance of a procedure name that concludes with a letter rather than a number (e.g. VOR-A instead of VOR 31)?
This procedure does not meet the criteria for a straight-in landing.
Define TDZE (touch down elevation)
The highest elevation in the first 3,000 feet of the landing surface.
Define TCH (Threshold Crossing Height)
The AGL height at which you cross the threshold if you continue the approach to a landing while maintaining the glide slope/path or vertical descent angle.
Define HAA (Height Above Airport)
The height of the MDA (minimum decent altitude) above the published airport elevation. (Circling-to-land minimums)
Define HAT (Height Above Touchdown)
Sometimes referred to as decision height (DH), is measured from the touchdown zone elevation
Define Airport elevation
The highest point of an airport's usable runways; also known as field elevation
FAR 91.175 specifies ten different visual references of which you must be able to identify at least one in order to continue an approach past the MAP. What are they?
1) Approach light system
2) Threshold
3) Threshold markings
4) Threshold lights
5) REIL
6) VASI
7) Touchdown zone or markings
8) Touchdown zone lights
9) Runway or runway markings
10) Runway lights
What is a step-down fix?
Used along approach segments to enable you to descend to a lower altitude after you overfly obstacles, or in conjunction with the design of local ATC procedures.
Name three different course reversal maneuvers that are commonly depicted on instrument approach procedures.
Procedure Turn, Teardrop Procedure, Holding Pattern in lieu of Procedure Turn
Of the three different course reversal maneuvers that are commonly depicted on instrument approach procedures, which are required to be flown as charted?
Teardrop and Holding Pattern in lieu of Procedure Turn
What is WAAS?
Wide Area Augmentation System
What is RAIM?
Receiver Autonomous Integrity Monitoring (requires minimum of of 5 satellites, 6 for enhanced RAIM)
What is baro-VNAV?
A system that builds a glide path by sensing and then comparing the airplane's altitude with a calculated altitude for the airplane's position on the glide path. Must have local altimeter setting in GPS.
What is the missed approach point for an RNAV (GPS) approach
Using LNAV and circling minimums, RW Waypoint. If using LPV or LNAV/VNAV the DA while on Glide Path.
What symbol is used to indicate that nonstandard alternate minimums exist?
Nonstandard alternate minimums exist

What are the requirements to descend below DH/MDA?
Have a prescribed flight visibility and at least one of the visual clues. Also, be in a position where you can land on the intended runway, using normal maneuvers.
What is the purpose of an initial approach fix and how is it depicted on an approach chart?
The point/fix where the initial approach segment begins and it is depicted on an approach chart with the letters IAF at the location
What does a precision approach (PA) provide?
Lateral guidance to align the airplane with the runway and vertical guidance in the form of a glide slope indication to help maintain the airplane in a stabilized vertical descent to the runway.
What should you do if you lose visual reference while circling to land from an instrument approach procedure (ATC radar service not available)?
Initiate a missed approach by making a climbing turn toward the landing runway to establish the airplane on the missed approach course.
What is the procedure for initiating a missed approach before reaching the MAP?
Proceed to the missed approach point at or above the MDA or DA before performing a turning maneuver.
What is the purpose of a feeder route on an approach chart?
To provide a link between an enroute fix or navaid and the initial approach fix
What is the full scale deflection of the CDI needle when on a localizer frequency?
2.5 degrees on either side and is 4 times more sensitive than a VOR
How should you proceed when cleared for a sidestep maneuver?
Continue to fly the approach for the primary runway and maneuver to the parallel runway once you have the runway in sight.
How can you calculate rate of descent?
Rate of descent = altitude to descend รท Distance (NM) x Groundspeed (Knots) รท 60
In which category of approaches do RNAV approaches that use a glide path to either LNAV/VNAV or LPV minimums belong?
Approach with vertical guidance (APV)
How do you calculate the approach category for your aircraft?
1.3 * VSo
What symbol depicts the final approach fix for a non-precision approach?
A (Maltese) Cross
What is a Minimum Descent Altitude (MDA)?
The minimum altitude to which you may descend until you either identify the runway environment or, lacking the required visual references, perform a missed approach at the missed approach point.
Without WAAS or Baro-VNAV, what is the only type of RNAV approach you can use?
LNAV
What are the typical landing minimums for a CAT I, ILS approach with all components operative?
Visibility-2400 RVR or 1/2 statute mile; DH-200 feet above the touchdown zone elevation
What dose MSA provide?
1,000ft of obstruction clearance within 25 NM from the facility, but is does not provide navigation or communication coverage
Which devices may be used for range information on an ILS approach?
IFR-approved RNAV (GPS) equipment, an outer marker, compass locator, NDB, published DME or VOR fixes, precision approach radar (PAR), and airport surveillance radar (ASR).
When flying an VOR approach with an on-airport facility, when does the final approach segment begin?
Once you have intercepted the inbound course after completing the procedure turn and within the specified distance.
What is a visual approach?
Once a pilot has reported the airport or preceding aircraft in sight, and the weather is at least 1000/3, ATC is able to assign this type of approach
What are the standard alternate minimums for a precision approach?
600 ft ceiling and 2 statue miles of visibility
What is a fly-by waypoint?
A waypoint or fix that does not have to be flown over before continuing to the next leg. The GPS will anticipate the turn so that you will intercept the next leg once the turn is complete
What happens if the glide slope becomes inoperative during an ILS approach?
The approach becomes a non-precision LOC approach and the LOC only minimums then apply
What are the main components of the ILS system?
Localizer, Glide Slope, Range information (e.g. marker beacons), and Approach Lights
When you hear "Cleared For Approach" you may
Fly the published route and altitudes but may not descend to published altitudes until you are on a published route
What are the 3 approach procedure types?
Precision approach (PA), approach with vertical guidance (APV), nonprecision approach (NPA)
What is a DA?
An altitude used for precision approaches, following the glide slope once you reach this altitude you make the decision to continue or execute the missed approach procedure.
What is a contact approach?
ATC can issue this clearance ONLY upon pilot's request when ground visibility at the airport is 1SM or greater. ATC provides separation from IFR traffic, but no obstruction clearance.
What are the standard alternate minimums for a non precision approach?
800 ft ceiling and 2 statue miles of visibility
What are the standard alternate minimums for an airport without an instrument approach procedure?
Ceilings that allow a decent from the MEA to landing under VFR
What is a fly-over waypoint?
A waypoint (marked by a star enclosed in a circle) requires you to fly over that waypoint before initiating a turn to the next leg
What symbol depicts the Final Approach Fix on a Precision Approach?
A maltese cross
Does the intermediate approach segment always begin with or at the Intermediate Fix (IF)?
No
Where does the Intermediate Approach Segment begin when there is no Intermediate Fix depicted?
the intermediate segment begins at a point where you are proceeding inbound to the final approach fix, are properly aligned with the final approach course, and are located within the prescribed distance from the final approach fix.