1/90
Looks like no tags are added yet.
what is filtration
its the process of filtering out long wavelength photons and makes the xray beam harder, its a form of radiation protection
what does it do to the primary beam
it makes the beam more homogeneous
what are filters usually made of
aluminum which has a z number of 13
what is the symbol of aluminum
Al
filtration lowers the patient dose by filtering out bad photons what two types of filtration are there
added and inherent
what is inherent filtration
its the filtration that is already installed in the xray tube off the assembly line
what is added filtration
its the filtration that is added to the inherent filtration thats already in the machine
what is the total filtration
its literally inherent + added= total filtration
WHAT IS THE NUMBER MANDATED BY LAW THAT MAKES THE TOTAL FILTRATION A SPECIFIC THICKNESS WITH MACHINES THAT OPERATE ABOVE 70 KVP
2.5 mm Al equivalent
can the filtration be altered by the radiographer
no
what range of thickness does the inherent filter have
.5-1.0 al eq
what are the components of inherent filters
glass envelope, insulation oil, collimator mirror
What is sun tanning
when tungsten deposits occur in the tube and its considered a form of inherent filtration
what makes up added filtration
addition aluminum sheets that are placed in the path of the beam near the x ray tube window
what 4 reasons are aluminum used for
it has a low z number of 13, its readily available, easy to shape, its cheap
increasing filtration does what to intensity and effective energy
it decreases the intensity but increases the effective energy
what is the filtration need for kvp ranges that are under 50
.5 mm al
what about 50-70
1.5 mm al
what about kvp above 70
2.5 mm al
what happens when you increase filtration above 3mm
it does essentially nothing and may actually cause the image to suck
what are the effects of filtration
it absorbs low energy(long wavelength) rays, and it allows more high energy x rays to pass through unattenuated to produce a better image
does filtration harden the beam
YES
what are some more benefits of filtration
they increase average energy of the beam which results in lower contrast(high kvp) directly contributing to a lower patient dose
when filtration is included what relation ship does contrast and density have
direct, contrast goes down and so does density
when using filtration what happens
contrast and density go down
when using collimation
density goes down BUT contrast goes up
what is the 3rd and lesses talked about filter
compensating filter
what is it
its a special type of filter used occasionally when the body part being examined changes in thickness or density from one area to another
whats another way to remember
think of the wedge that west talked about and how it can stop the smaller and thinner toes from being burnt out when doing a foot
the most common form of compensating filter is the
wedge
what is it made of
aluminum
what does it look like
its a wedge that is thicker on one side and less on the other
where would you put each side
the thinner side on the thicker part of body and thicker side on the thinner side of body
what are other types of compensating filters
trough(for spine/chest), plexiglass(chest) and they both require an increase in technique
what does using a wedge for a chest do
increases the density of the lung bases without overexposing the apices
what about the feet
helps not overexpose the toes when doing a foot
what is the h and d curve
its the response of film as a function of the xray exposure, it is also nonlinear(curved)
what does it describe
the OD versus the logarithm(base 10) of exposure
what shape does the curve have
sigmoid or S shape
on the graph its plotted on the
y(density) and x(exposure) axis
what are some other names for H&D
(film) characteristic curve, d log e curve, sensitometric curve
what equipment is needed for sensitometry
sensitrometer(or penetrometer), densitrometer, graph paper
what is a sensitrometer
its a device which produces steps of gray tones on film
what is a penetrometer
its an Al step wedge
what is a densitrometer
its a device which measures the amount of density on a radiograph
what are the steps needed when doing sensitometry : step 1
expose the film with sensitometer or penetrometer to produce a control strip of densities
step 2
process film
step 3
measure each density step with a densitometer
step 4
plot the density on a graph
step 5
connect the dots( forms a curve)
what does the toe( bottom part of curve) represent
it represents low exposure and density; B+F portion of the curve from 0- .25 density
what does the body represent
its the portion of the curve fromm .25 to 2.5 density and it measures the usable densities that indicate overall grey scale(contrast) of the film
what does the shoulder( top part) represent
it represents the portion that starts at 2.5 to maximum density( also known as dmax) it also measures the unusable densities
what is speed point
its the point on the h&d curve where a density of OD 1.0+ B+F is achieved
what is contrast
its the range of values between OD .25+B+F and OD 2.50+B+F
xray film is a negative recorder so what happens with increased light
it causes the developed film to become darker
what is the degree of darkness quantified by
OD and its measured with a densitometer
density values are expressed in???
Logarithims
the formula for transmittance and OD is
OD= log10 x light incident/light transmitted
regions of a more vertical slope have
higher contrast
regions of a more horizontal slope have
lower contrast
a single number that which defines the overall contrast of a given type of radiographic film is
the average gradient
can values fluctuate more then 0.10 from baseline
no
how is contrast number produced
by the resulting sum of subtracting density values that are logarithms
how do you determine the contrast on a h&d graph
you look at the straight line portion to see if it is vertical or horizontal
more vertical mean
short scale contrast; high contrast
more horizontal mean
long scale; low contrast
when something has a lot of contrast in a radiograph what does that mean
it has a striking difference between black and white areas and has few greys
what about low contrast
it has little differences between black and white areas and may have many shades
lattitude on a h&d graph
the latitude depends on the type of slope
a more vertical slope has
a narrow latitude
a more horizontal slope has
a wide latitude
what is recorded detail based on in a h&d graph
film speed
a steeper curve has a
poorer recorded detail
a shallow curve has a
better recorded detail
speed on a h&d graph
it refers to where its located on the graph
if the curve is closer to the left it
has a faster speed and thicker emulsion film
the relationship between exposure and OD should stay
constant regardless of the exposure rate
for very long or short exposures and when observing the exposure rate dependency between OD what law is this called
reciprocity law failure
when is sensitometric testing done
daily on every processor
what does it do
ensures consistent processing of films by monitoring speed, contrast, and base plus fog( B+F)
H&D interpretation; less patient dose
film to the left
less technique needed
film to the left
thickest emulsion film
film to the left
best recorded detail film
film to the right with a more horizontal(shallow)slope
widest latitude
more horizontal slope
extended development time
more vertical slope
less patient dose, fastest screen, less tech, thickest emulsion film
film to the left
best recorded detail film, slower speed
film to the right and more horizontal(shallow) slope
low contrast, widest latitude, more grays
more horizontal slope
high contrast, narrow latitude, less gray tones, extended development time, greatest contrast
more vertical slope.