1/69
Comprehensive vocabulary flashcards covering key definitions, mathematical rules, formulas, and terminology from the Grade 10 MYP 5 Mathematics revision guide.
Sequence
An ordered list of numbers that follows a rule or pattern, where each number is called a term.
Arithmetic Sequence
A sequence that changes by adding or subtracting the same fixed amount each time.
Common Difference (d)
The fixed constant added or subtracted between consecutive terms in an arithmetic sequence, found using d=an−an−1.
Explicit Rule (Arithmetic Sequence)
The formula an=a1+(n−1)d, used to find any term directly from its position n.
Recursive Rule (Arithmetic Sequence)
A formula structure that states the first term (a1) and defines each subsequent term using the preceding term: an=an−1+d.
Geometric Sequence
A sequence in which each term is found by multiplying the previous term by the same constant factor.
Common Ratio (r)
The constant multiplying factor between consecutive terms in a geometric sequence, calculated as r=an−1an.
Explicit Rule (Geometric Sequence)
The formula an=a1×rn−1, which calculates any term directly from its position n.
Recursive Rule (Geometric Sequence)
A rule that specifies the initial term (a1) and generates each new term from the prior term using an=r×an−1.
Series
The sum of the terms of a sequence, which can be finite (having a limited number of terms) or infinite (continuing without ending).
Finite Geometric Series Formula
The formula Sn=1−ra1(1−rn), used to find the sum of the first n terms of a geometric sequence when r=1.
Infinite Geometric Series Sum Condition
The requirement that an infinite geometric series has a finite sum if and only if the absolute value of its common ratio satisfies ∣r∣<1.
Infinite Geometric Series Formula
The formula S∞=1−ra1, which gives the sum of an infinite geometric series provided that ∣r∣<1.
Gradient (m)
The rate of change or steepness of a line in a linear function equation of the form y=mx+c.
y-intercept (c)
The value of y where a graph crosses the vertical axis, corresponding to the input value x=0.
Logarithm
The exponent to which a specified base must be raised to produce a given number, defined by the equivalence ab=c⟺loga(c)=b.
Common Logarithm
A logarithm with base 10, conventionally written without an explicit base as log(x).
Natural Logarithm
A logarithm with the mathematical constant base e (e≈2.71828), written as ln(x).
Logarithm Product Property
The property stating that the logarithm of a product equals the sum of the logarithms of its factors: logb(MN)=logb(M)+logb(N).
Logarithm Quotient Property
The property stating that the logarithm of a division equals the difference between the logarithms: logb(NM)=logb(M)−logb(N).
Logarithm Power Property
The property allowing an exponent within a logarithmic argument to be brought out front as a multiplier: logb(Mn)=nlogb(M).
Change-of-Base Formula
The mathematical identity used to evaluate or convert logarithms of any valid base: logb(M)=log(b)log(M)=ln(b)ln(M).
Extraneous Solution
A candidate mathematical solution derived via algebraic steps that is not valid because it violates domain restrictions, such as making a logarithm argument non-positive.
Imaginary Unit (i)
The unit defined as i=−1, which satisfies the fundamental identity i2=−1.
Complex Number
A number written in the standard form z=a+bi, where a is the real part and b is the coefficient of the imaginary part.
Complex Conjugate
For a complex number a+bi, the expression a−bi, which reverses the sign of the imaginary part and yields a purely real product (a+bi)(a−bi)=a2+b2.
Discriminant (Δ)
The expression Δ=b2−4ac from the quadratic formula, which determines whether the roots of a quadratic are two distinct real (Δ>0), one repeated real (Δ=0), or two complex conjugates (Δ<0).
Impedance (Z)
A complex measure of total opposition to electrical current in alternating current circuits, measured in ohms (Ω).
Population
The entire group of individuals, items, or events that a study is interested in investigating.
Sample
The smaller subset of individuals or observations actually selected and measured from a population.
Parameter
A fixed numerical measure that describes an entire statistical population.
Statistic
A numerical value calculated from sample data, used to estimate an unknown population parameter.
Criterion C (MYP)
An assessment criterion focused on communicating mathematics clearly through correct notation, terminology, complete reasoning, and organized representations.
Criterion D (MYP)
An assessment criterion focused on identifying relevant elements, selecting appropriate models, applying mathematics, justifying accuracy, and evaluating results within real-life contexts.
Sequence
An ordered list of numbers that follows a rule or pattern, where each number is called a term.
Common difference (d)
The fixed amount added or subtracted between consecutive terms in an arithmetic sequence, calculated as d=an−an−1.
Explicit rule for an arithmetic sequence
The formula an=a1+(n−1)d, used to determine any specific term directly from its position n.
Recursive rule for an arithmetic sequence
A rule stating the first term a1 and defining subsequent terms using the previous term: an=an−1+d.
Geometric sequence
A sequence in which each term is found by multiplying the previous term by a constant multiplier known as the common ratio r.
Common ratio (r)
The constant multiplier between consecutive terms of a geometric sequence, calculated as r=an−1an.
Explicit rule for a geometric sequence
The formula an=a1⋅rn−1, which yields the value of the nth term.
Growth factor
The multiplier used to model percentage increase, calculated as 1+percentage rate (expressed as a decimal).
Decay factor
The multiplier used to model percentage decrease, calculated as 1−percentage rate (expressed as a decimal).
Series
The sum of the terms of a sequence, with Sn denoting the partial sum of the first n terms.
Finite geometric series formula
The formula Sn=1−ra1(1−rn), valid for r=1.
Infinite geometric series sum
The limit of the sum of infinitely many geometric terms, given by S∞=1−ra1, which only exists when ∣r∣<1.
Gradient (m)
The slope or rate of change in the linear function equation y=mx+c.
y-intercept (c)
The value of y where a line crosses the vertical axis, corresponding to x=0 in y=mx+c.
Logarithm
The exponent to which a given base b must be raised to produce a specified value c, written as logb(c)=a and equivalent to ba=c.
Product property of logarithms
The rule stating that the logarithm of a product equals the sum of the logarithms: logb(MN)=logb(M)+logb(N).
Quotient property of logarithms
The rule stating that the logarithm of a quotient equals the difference of the logarithms: logb(NM)=logb(M)−logb(N).
Power property of logarithms
The rule allowing an exponent inside a logarithm to become a coefficient: logb(Mn)=nlogb(M).
Change of base formula
The relationship used to convert logarithm bases: logb(M)=log(b)log(M)=ln(b)ln(M).
Extraneous solution
A solution obtained algebraically that is invalid because it produces a non-positive (zero or negative) argument inside an original logarithm.
Imaginary unit (i)
The mathematical quantity defined as i=−1, which satisfies the identity i2=−1.
Powers of i cycle
The four-term repeating sequence of values taken by powers of i: i, −1, −i, and 1.
Complex number standard form
The form z=a+bi, where a represents the real part and b represents the coefficient of the imaginary part.
Complex conjugate
The expression a−bi paired with a+bi, which alters the sign of the imaginary part and yields (a+bi)(a−bi)=a2+b2.
Discriminant (Δ)
The value Δ=b2−4ac from the quadratic formula, which determines whether the roots are distinct real (Δ>0), repeated real (Δ=0), or complex conjugate (Δ<0).
Ringing circuit
An electrical circuit model with complex roots (negative discriminant) that exhibits oscillating behavior, which dies away over time if the real part of the roots is negative.
Impedance (Z)
The total opposition to current flow in an alternating current circuit, measured in ohms (Ω) and modeled as a complex number.
Series impedance formula
The rule for total circuit impedance when components are arranged in series: Ztotal=Z1+Z2+….
Parallel impedance formula
The product-over-sum formula used to determine total impedance for two parallel circuit branches: Ztotal=Z1+Z2Z1⋅Z2.
Wi-Fi correction factor (h)
The complex scaling and rotation factor determined by h=sent referencereceived reference, used to decode signals via sent point=hreceived point.
Population
The entire group of individuals, objects, or items that a statistical study aims to describe and draw conclusions about.
Sample
A subset of the population that is actually selected and surveyed to gather data.
Parameter
A numerical characteristic or measure that describes an entire population.
Statistic
A numerical characteristic or measure calculated from sample data, used to estimate an unknown population parameter.
Criterion C (Communicating)
The MYP assessment strand focused on clear mathematical communication, use of correct notation, organized working, and multiple representations.
Criterion D (Applying mathematics)
The MYP assessment strand focused on identifying key variables, selecting models, applying methods accurately, justifying rounding, and evaluating results within real-life contexts.