1/144
Looks like no tags are added yet.
two definitions of sound
physical stimulus
perceptual stimulus
physical stimulus
Sound is a vibratory disturbance that occurs in air or some other “medium” (substance).
sound consists of waves-local changes in pressure—that travel through the medium.
perceptual stimulus
the experience we have when we hear.
properties of sound
frequency
amplitude
waveform
frequency- sound wave property
equivalent to…
pitch (sound perception)
wavelength (light wave property)
hue (color) (light perception)
amplitude- sound wave property
equivalent to
loudness (sound perception)
intensity (light wave property)
brightness (light perception)
waveform- sound wave property
equivalent to
timbre (sound perception)
mix of wavelengths (light wave property)
saturation (light perception)
frequency
is the number of times that a wave repeats itself in a second
measured in hertz (hz)
1 Hz = 1 cycle/sec
1000 Hz = 1000 cycles/sec
pure tones (frequency)
a single frequency.
They are rare (tuning forks), but most natural sounds and instruments are combinations of frequencies
frequency and pitch
frequency is related to pitch
Higher frequency = higher pitch.
Frequency is the inverse of wavelength, so higher frequency means shorter wavelength.
tone chroma
the quality of a tone as you move from octave to octave (all the Cs sound alike).
limits to frequency
humans hear roughly 20 to 20,000 Hz.
Dogs, mice, and dolphins hear higher
elephants hear lower.
amplitude
is the pressure difference between the atmospheric pressure and the maximum pressure of the wave (how large the sound wave is)
measured in decibels
Scientists usually use 20 micropascals as the reference amplitude because that is approximately the detection threshold of a 1000-Hz sound (called dB SPL)
Calculating dB SPL
dB SPL = 20 log(p/20)
dB = decibels
p = the pressure of the sound stimulus
Example: p = 20,000 → 20,000/20 = 1000 → log(1000) = 3 (count the zeros) → 20 × 3 = 60 dB
what perceptual property of sound does amplitude go with
it is linked with loudness
waveform
the shape and uniformity of the wave
perceptual property related is timbre
harmonics
Complex waves are sums of sine waves
fundamental frequency is the 1st harmonic. Higher harmonics are whole-number multiples of the fundamental.
other timbre contributors
Attack: the build-up of sound at the start.
Decay: the decrease in sound at the end of the tone.
directions of localization
Azimuth: left-right
Elevation: up-down
Distance
binaural cues
depend on differences between the two ears; most useful for azimuth
IID/ILD (interaural intensity/level difference)
interaural time difference (ITD)
IID/ILD (interaural intensity/level difference)
The difference in sound pressure level reaching the two ears
acoustic shadow
the head blocks high-frequency sounds (short wavelengths), so the far ear gets a quieter sound. Low frequencies bend around the head, so there is no shadow.
ITD (interaural time difference)
Sounds on the side of the head reach the far ear, slightly later than the closer ear.
Normal ears can detect a difference if 10 microseconds
monaural cues
uses information from one ear
spectral cues
spectral cues
The pinna and head change the intensities of different frequencies depending on where the sound comes from. The brain uses that frequency pattern (“spectrum”) to judge location, mainly elevation.
Microphones in the ears: the frequency intensity pattern differs for sounds at +15° vs. −15° elevation.
Pinna mold experiment:
Before the mold, listeners were accurate.
Day 0, with the mold: elevation performance was poor, but azimuth was unaffected.
Day 19: elevation performance was close to normal again, so the brain learned the new cues.
After the mold was removed: performance stayed high. This suggests two separate sets of neurons, one for each set of cues.
hearing curve
The audibility curve (green) is the threshold: the quietest sound we can detect at each frequency. Anything below it can’t be heard.
Point A (about 20 Hz, 40 dB) falls below the audibility curve, so no, we couldn’t hear it.
We are most sensitive to about 2,000 to 5,000 Hz, where the curve dips lowest. This overlaps with the frequencies of conversational speech.
The threshold can be below 0 dB because 0 dB is just the reference pressure, not silence. At our most sensitive frequencies, we detect sounds quieter than the reference.
outer ear
pinna, auditory canal, tympanic membrane (eardrum)
pinna
the visible part of the ear itself

cone of confusion
A set of locations that all produce the same ITD and ILD, so binaural cues can’t tell them apart. Sounds from opposite sides of the cone have the same volume and time difference.
Front and back locations on the midline give the same ITD and ILD (both zero), so they fall on the same cone of confusion.
auditory canal
About 3 cm long
It works like a tunnel
it channels sound toward the eardrum.

resonance (outer ear)
Occurs when sound waves are reflected back from the closed end of the canal. Certain frequencies are reinforced depending on the size of the canal.
The “resonant frequency” for most humans is between about 1,000 and 4,000 Hz (also the frequencies our basilar membrane responds best to)
the reflected waves line up with the incoming waves and add together, so the sound pressure at the eardrum is boosted at those frequencies. This helps explain why the hearing curve dips lowest (we’re most sensitive) around 2,000 to 5,000 Hz.
tympanic membrane (eardrum)
It separates the outer ear from the middle ear. Pressure changes from sound make it vibrate
middle ear
about 2cm² and contains the smallest muscles in the body, as well as the ossicles or bones of the ear
ossicles
malleus
incus
stapes
ossicles
Malleus (hammer) → incus (anvil) → stapes (stirrup). The malleus connects to the eardrum, and the stapes connects to the oval window
They transfer vibration from the air-filled outer and middle ear to the fluid-filled inner ear.
ossicles and area ratio
the force collected by the large eardrum is concentrated onto the much smaller oval window. Same force on a smaller area means greater pressure.
ossicles and lever action
the ossicles act like a lever (the slide’s seesaw picture), so they deliver a greater force to the oval window.
middle ear muscles
they contract at high noise levels and dampen sound to:
decrease damage from loud sounds
decrease low frequencies so they don’t drown out higher frequencies of interest
inner ear
oval and round windows, cochlea, 3 tunnels, organ of corti, basilar membrane,
oval window
Entrance to the cochlea; the stapes pushes on it
base of cochlea
End near the oval and round windows
apex of the cochlea
Far tip of the coil
3 tunnels of cochlea
Scala vestibuli, scala media, scala tympani
each goes from the base to the apex
scala media
Middle tunnel; where the receptor cells for hearing are
“hallway”
organ of corti
Sits on the basilar membrane in the scala media; contains the hair cells
basilar membrane
Floor of the organ of Corti; vibrates in response to sound; responds best to ~1,000 to 4,000 Hz
High frequencies peak near the base, low frequencies near the apex
what type of receptors are hair cells
mechanoreceptors
cilia
Hair-like projections on top of hair cells that bend when the membranes move
inner vs outer cells
One row of inner, three rows of outer
transduction in hearing
Mechanical bending of cilia → electrical signal in the auditory nerve
What happens when inner hair cells bend one way?
The cell depolarizes, which causes the receptor to fire.
What happens when inner hair cells bend the other way?
The cell hyperpolarizes, which leads to only small bursts of firing
loudness
is determined by the amplitude of a sound wave.
Larger amplitude = louder sound.
Larger sound waves cause:
More movement of the basilar membrane.
More bending of hair-cell cilia.
More action potentials in auditory nerve fibers.
pitch
is determined by the frequency of a sound wave.
High frequency = high pitch.
Low frequency = low pitch.
two theories explaining pitch
place theory
timing theory
place theory
proposed by von Békésy.
The location of the greatest vibration on the basilar membrane determines pitch.
The basilar membrane has two important areas:
Base: Smaller and stiffer; responds to high frequencies.
Apex: Wider and more flexible; responds to low frequencies.
The location of maximum vibration tells the brain what frequency it is hearing.
complex sounds
Think about a piano, violin, and clarinet. They can all play the SAME note, but they sound different. Because they have different combinations of frequencies. This difference in sound quality is called timbre.
Fourier analysis
this breaks a complex sound into its individual frequency components.
Different parts of the basilar membrane respond to those different frequencies.
tuning curves
tell us which frequencies an auditory nerve fiber responds to.
Each fiber has a frequency it responds to BEST.
outer hair cells
Help amplify and fine-tune vibrations.
help your ear hear sounds more precisely.
motile response
The slight tilting and lengthening of the outer hair cells.
what happens if Outer Hair Cells are destroyed?
Destroying outer hair cells leads to decreased firing of inner hair cells.
Why are tuning curves narrower in living ears?
Functioning outer hair cells make frequency responses more precise and selective.
timing theory
Your inner hair cells cause bursts of firing in the auditory nerve. The timing of those bursts corresponds to the frequency of the sound.
what is phase locking
The nerve fires at a consistent point in the sound wave, near its peak.
limits of true timing coding
Only works up to about 100 Hz.
place coding
can work for ALL frequencies
volley principle
One neuron can't fire for every wave cycle at higher frequencies, so multiple neurons take turns firing at different points. Their combined activity represents the frequency.
can only get you up to 5000 Hz
auditory pathway
After sound is detected by the ear, the information travels through several brain structures before reaching the auditory cortex.
SONIC MG:
S — Superior
O — Olivary
N — Nucleus
I — Inferior
C — Colliculus
M — Medial
G — Geniculate
auditory cortex
tonotopy
means that sound frequencies are organized by location in the auditory cortex
how the auditory cortex is mapped
bottom up processing
your brain uses information coming directly from the sound itself.
You hear someone say a word.
Your brain analyzes the sounds you hear.
You use those sounds to recognize the word.
top down processing
using your knowledge, experiences, and context to help understand sounds.
If someone says a word but you don't hear it clearly, you can use the rest of the sentence to figure out what they said.
top down processing and speech
Your brain uses the context of the sentence to help figure out what they said.
Context helps us understand speech, especially when sounds are unclear.
mcgurk effect
happens when what you SEE someone say changes what you HEAR.
What we see can influence what we hear.
yanny vs laurel
Some people hear Yanny, while others hear Laurel, even though they're listening to the same recording.
Main idea: The same sound can be perceived differently by different people.
tritone paradox
where people hear two tones and disagree about whether the pitch is going up or down.
Main idea: Our perception of pitch can be influenced by how our brains interpret sound.
pure-tone audiometry
An audiometer is used to test hearing.
It determines your hearing threshold at each frequency.
The results are recorded on a graph called an audiogram.
hearing threshold
the quietest sound you can hear at a particular frequency.
audiogram
is the graph that shows the results of your hearing test.
Horizontal axis (Hz): Frequency, or pitch. Low pitches are on the left; high pitches are on the right.
Vertical axis (dB): Hearing level. The higher the number, the louder a sound must be for you to hear it.
what does a higher dB hearing threshold mean?
A higher dB hearing threshold generally means worse hearing because you need a louder sound to detect it.
two types of hearing loss
conductive hearing loss
sensorineural hearing loss
conductive hearing loss
happens when sound vibrations are not conducted properly to the inner ear.
causes of conductive hearing loss
Excessive earwax buildup
Foreign objects in the ear
Ruptured eardrum
Infection or malformation of the ear canal
Problems involving the middle-ear bones.
One example is otosclerosis.
otosclerosis
Happens when the stapes (one of the tiny middle-ear bones) becomes fused with the surrounding bone.
Normally, the stapes vibrates to help transmit sound. When it becomes stuck, it cannot vibrate properly, so sound transmission is reduced
stapedectomy
surgery used to treat otosclerosis
The stapes is stuck and cannot vibrate properly.
The surgeon removes the affected stapes.
An artificial device (prosthesis) replaces it.
The device helps transmit sound vibrations again.
sensorineural hearing loss
Hair cells, nerves, or brain centers aren't functioning normally.
presbycusis
age-related hearing loss
It typically affects high-frequency sounds more than low-frequency sounds.
sensorineural hearing loss
acoustic trauma
Hearing damage caused by exposure to loud sounds
sensorineural hearing loss
tinnitus
is when you hear a sound, such as ringing, even when there is no outside sound causing it.
sensorineural hearing loss
Loud sounds
Certain drugs
Ear infections
Food allergies
cochlear implants
converts environmental sounds into electrical signals that stimulate the auditory system.
someone who loses their hearing later in life may have a harder time adjusting to a cochlear implant than someone with congenital hearing loss.
why might someone NOT get a cochlear implant
They don't restore completely natural hearing.
They require surgery.
It takes time and practice to adjust to the sounds.
Some people may prefer other ways of communicating or may not feel an implant is right for them.
mechanoreception
means sensing the physical properties of objects through touch.
It helps you detect:
Hardness or softness
Roughness or smoothness
Size
Shape
Pressure and movement across your skin
Proprioception and kinesthesis:
Body position and movement.
thermoreception
temperature
nociception
pain or potentially damaging stimuli
epidermis
the outer layer
dermis
the layer underneath, containing structures as blood vessels, sweat glands and nerve fibers
free nerve endings
Nerve endings that aren't surrounded by a special capsule. Some detect temperature and pain.
encapsulated nerve endings
Nerve endings surrounded by a capsule or specialized structure. These include several mechanoreceptors that detect touch and vibration.
slowly adapting (SA)
Keeps responding while a stimulus is being applied. It detects sustained pressure or stretching.
Sustained response.