Residential Carpentry: Power Tools, Safety Protocols, and Consumables

A complete set of vocabulary flashcards covering power tool safety protocols, personal protective equipment, maintenance guidelines, consumable storage rules, and lap joint fabrication steps.

Virtue Ethics (Carpentry)

The principle operating under 'Responsible use = respect for life + tools,' valuing personal safety and equipment longevity above task speed.

Goggles

Primary defense PPE that protects against high-velocity wood chips and airborne debris to prevent permanent eye injury.

Ear Protection / Ear Muffs

PPE required during power tool operation to protect against irreversible hearing loss caused by high-decibel motor noise.

Dust Masks

Respiratory PPE that filters out particulates to protect lungs from long-term damage caused by fine sawdust.

Closed Shoes

Durable, closed-toe footwear required on the shop floor to protect feet from impact and puncture caused by heavy materials and sharp off-cuts.

Lock-Out/Tag-Out

Primary safety defense protocol requiring tools to be physically disconnected and locked from power sources before changing blades or bits or making mechanical adjustments.

Operational Stance

Maintaining a balanced grip and firm stance without overreaching to ensure total control over a power tool's torque and movement.

Post-Use Power Protocol

The safety rule requiring power tools to be unplugged from power sources immediately after completing a task.

Motor Vent Maintenance

Clearing sawdust and debris from motor vents using a stiff brush or clean cloth while the tool is unplugged to prevent overheating and motor failure.

Safety Guard Lubrication

Applying lubricant to safety guard springs and pivot points according to manufacturer specifications so guards never stick open.

Tool Storage Protocol

Keeping power tools in a dedicated, dry location to prevent baseplate rust and internal electrical component corrosion.

Carpentry Consumables

Materials used up during a project that require proper handling and storage to prevent waste, damage, and accidents.

Wood Glue / Adhesive

A consumable used to bond wood pieces; stored tightly sealed, upright, away from heat and moisture.

Nails / Screws

Consumables used for mechanical fastening; stored in labeled, dry containers to prevent rust.

Sandpaper

A consumable used to smooth wood surfaces; stored in a flat, dry area with different grits separated and labeled.

Wood Filler

A consumable used to fill gaps and holes; stored in a sealed container avoiding exposure to air to prevent drying.

5S System

Workshop safety framework consisting of five phases: Sort, Set in order, Shine, Standardize, and Sustain.

Lap Joint Fabrication Steps

The five-step joint manufacturing sequence: 1. Prepare, 2. Cut & Smooth, 3. Apply Consumable, 4. Assemble & Clamp, and 5. Cure & Finish.

Lap Joint Skills Assessment Weights

Evaluation breakdown for lap joint fabrication consisting of Safety at 40%, Accuracy at 30%, and Use of Consumables at 30%.

Types of Lap Joints

Wood joint variations shown in residential carpentry including Half Lap, Mitred Half Lap, Cross Lap, and Dovetail Crossed Lap.