1, kind of sucks, learn by reading the actual notes!

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/39

encourage image

There's no tags or description

Looks like no tags are added yet.

40 Terms

1
New cards

What are Surface Plasmon Polaritons (SPP)?

Charge density oscillations of electromagnetic origin propagating parallel to a metal-dielectric interface

2
New cards

What defines the Surface Plasmon Resonance (SPR) angle?

The incidence angle where maximum loss or a sharp dip in reflected light intensity occurs due to photon-plasmon coupling

3
New cards

What is the typical decay length of the SPR evanescent field into the low refractive index medium?

The field decays exponentially in the z-direction with a decay length usually on the order of 200 to 400 nanometers

4
New cards

What is the structural distinction between Kretschmann and Otto optical coupling configurations?

Kretschmann places the metal film directly on the glass prism, whereas Otto maintains an air gap between prism and metal

5
New cards

How many Resonance Units (RU) correspond to a specific protein mass density on a dextran chip?

1000 RU corresponds to 1 nanogram per square millimeter of bound protein mass

6
New cards

How are Ligand and Analyte defined in SPR experiments?

Ligand is the target molecule immobilized on the sensor chip surface, while Analyte is the binding partner injected in solution

7
New cards

What is the Langmuir Isotherm formula for steady-state 1:1 binding?

Req equals Rmax multiplied by CA divided by the sum of KD and CA

8
New cards

How is KD identified on a steady-state binding saturation curve?

KD is the analyte concentration required to reach half-maximum binding saturation, where Req equals 0.5 Rmax

9
New cards

What is the mathematical relationship between equilibrium constants KA and KD?

KA equals 1 divided by KD

10
New cards

What do the slope and x-intercept represent in a Scatchard plot of Req/CA versus Req?

The slope equals negative 1 divided by KD, and the x-intercept equals Rmax

11
New cards

What does non-linearity in a Scatchard plot indicate?

It indicates changing binding affinity with surface saturation, such as multi-site heterogeneous binding or cooperativity

12
New cards

How is the equilibrium dissociation constant KD calculated from kinetic rate constants?

KD equals the dissociation rate constant kdiss divided by the association rate constant kass

13
New cards

What is the formula for calculating complex half-life (t1/2) in SPR kinetics?

Half-life equals natural log of 2 divided by kdiss, or 0.693 divided by kdiss

14
New cards

What are the kinetic and thermodynamic properties of the Biotin-Streptavidin complex?

kdiss is 1.3e-7 per second and KD is 1.3 fM, resulting in a complex half-life of approximately 61 days for stable baseline capture

15
New cards

How are thermodynamic parameters enthalpy (dH) and entropy (dS) extracted from a Van 't Hoff plot?

The slope of ln(KD) versus 1/T equals dH divided by R, and the y-intercept equals negative dS divided by R

16
New cards

How must buffer pH be adjusted relative to ligand pI for amine coupling on dextran chips?

Buffer pH must be set below the ligand pI so the ligand carries a net positive charge for electrostatic attraction to negatively charged dextran

17
New cards

What is Mass Transport Limitation (MTL) in SPR assays?

MTL occurs when the diffusion rate of analyte from bulk solution to the surface is slower than the binding reaction rate

18
New cards

How can an investigator experimentally detect Mass Transport Limitation?

Measure binding kinetics at different flow rates, if association or dissociation rates change with flow rate, mass transport limits the assay

19
New cards

How is a solution competition SPR experiment designed?

Analyte concentration remains constant while increasing concentrations of soluble competitor are added, reducing surface binding response Req

20
New cards

How can non-interacting probe molecules like BSA measure adlayer thickness changes?

By comparing BSA penetration in sample and reference flow cells, measuring changes in adlayer thickness d2 during conformational shifts

21
New cards

What is the total molecular weight and symmetry of the Nuclear Pore Complex (NPC)?

The NPC is a roughly 120 MDa complex composed of about 30 distinct nucleoporins arranged in 8-fold rotational symmetry

22
New cards

What are the main structural domains and ring dimensions of the Nuclear Pore Complex?

Cytoplasmic ring, lumenal spoke ring with 125 nm outer and 60 nm inner diameter, nuclear ring, nuclear basket of 60 nm, and distal ring of 40 nm

23
New cards

How do NLS-containing cargo proteins translocate through the Nuclear Pore Complex?

Cargo binds import receptors like Kap-alpha and Kap-beta-1, which interact transiently and multivalently with FG-repeats in the central pore

24
New cards

What causes the release of NLS-cargo from Importin beta inside the nucleoplasm?

Nucleoplasmic RanGTP binds directly to Importin beta 1, inducing a conformational change that dissociates the cargo-receptor complex

25
New cards

How is the nucleocytoplasmic Ran gradient re-established in the cytoplasm?

Cytoplasmic RanGAP and RanBP2 trigger RanGTP hydrolysis to RanGDP, after which NTF2 imports RanGDP back into the nucleus

26
New cards

How many distinct nuclear transport receptor types can translocate through the NPC simultaneously?

More than 20 distinct karyopherin-like and NTF2-like receptors translocate through the central channel simultaneously

27
New cards

How does full-length Importin alpha exhibit autoinhibition?

Its internal IBB domain folds back intramolecularly to block its own NLS-binding pocket in the absence of Importin beta

28
New cards

How does Importin beta relieve autoinhibition in Importin alpha?

Importin beta binds to the IBB domain of Importin alpha, exposing the NLS-binding site so NLS-cargo can bind

29
New cards

What kinetic model describes the interaction between Kap alpha and Kap beta 1?

A two-state reaction model where initial complex formation AL undergoes a secondary conformational transition to A*L

30
New cards

What are the molecular weight, hydrodynamic diameter (rh), and FG motif count for cNup214?

MW of 26.9 kDa, hydrodynamic diameter of 3.4 nm, and 31 FG repeats including 4 FxFG motifs

31
New cards

What are the molecular weight, hydrodynamic diameter (rh), and FG motif count for cNup62?

MW of 22.7 kDa, hydrodynamic diameter of 3.7 nm, and 15 FG repeats including 7 FxFG motifs

32
New cards

What are the molecular weight, hydrodynamic diameter (rh), and FG motif count for cNup98?

MW of 50 kDa, hydrodynamic diameter of 5.6 nm, and 41 FG repeats including 4 FxFG and 7 GLFG motifs

33
New cards

What are the molecular weight, hydrodynamic diameter (rh), and FG motif count for cNup153?

MW of 62 kDa, hydrodynamic diameter of 5.1 nm, and 32 FG repeats including 15 FxFG motifs

34
New cards

How does grafting distance influence the physical conformation of FG-Nups on a surface?

Sparse grafting results in a collapsed layer, while close-packed grafting causes steric repulsions that extend FG-domains into a polymer brush

35
New cards

What causes kinetic heterogeneity during Kap beta 1 binding to close-packed FG-Nup layers?

Steric crowding produces fast phase low affinity and slow phase high affinity sub-populations due to varying FG motif accessibility

36
New cards

What is the key conceptual difference between FG-centric and Kap-centric NPC transport models?

FG-centric models view FG-Nups as the primary selective barrier, whereas Kap-centric models propose a high local Kap concentration inside the pore acts as the barrier

37
New cards

What biological role does cytoplasmic Importin beta 1 play with actin?

In the cytoplasm, Importin beta 1 binds F-actin to regulate stress fiber formation and link nuclear transport to cellular mechanics

38
New cards

What essential experimental conditions are needed when immobilizing actin for SPR analysis?

Actin must be immobilized under non-polymerizing conditions in the presence of ATP to maintain its functional binding activity

39
New cards

Why is Importin beta 1 used as the analyte rather than actin in Actin-Importin beta binding assays?

Importin beta 1 remains soluble above 10 micromolar, whereas actin polymerizes at high analyte concentrations required for transient binding

40
New cards

Which specific domain and mutant residues mediate Importin beta 1 binding to actin?

The HEAT repeat 1 domain, specifically involving residues E8 and Q22 as shown by the double mutant Imp-beta-1(E8A-Q22A)