1/11
Looks like no tags are added yet.
When performing a bottom blowdown, what is the proper order to open then close the blowdown valves?
fast acting, slow acting, slow acting, fast acting
Which of the following chemicals is used to fight oxygen in the feedwater system?
sodium sulfite
When any blowdown is performed at Invivotek, where must the water go before the floor drain?
blowdown tank
Invivotek has watertube boilers. If dissolved oxygen was to enter the boiler in the feedwater, what would happen to the tubes over time?
pitting
What is the danger of scale buildup on the boiler tubes?
ruptured and/or cracked tubes
At Invivotek, sodium sulfite is injected directly into the DA Tank.
True
When performing an alkalinity test at Invivotek on the boiler water, what is the desired range?
250ppm to 300ppm
What is added to the water in a brine tank?
Salt
Calcium and magnesium in boiler water will specifically cause what in boiler tubes?
Scale
Carbonic acid caused by carbon dioxide in condensate is highly corrosive. In boiler systems, what chemical is used to neutralize the carbonic acid?
cyclohexylamine
What are two types of blowdowns done to remove impurities form the boilers? Give the best answer.
Bottom blowdowns and surface blowdowns
Four of the five main water chemistry tests performed at Invivotek are: Combination P-Alkalinity and M-Alkalinity, Hardness, Phosphate, and pH. What is the fifth one?
Sulfite