1/14
Vocabulary practice flashcards covering electromagnetic induction, Faraday's Law, Lenz's Law, Fleming's Right Hand Rule, vector notations, and the mechanical and mathematical principles of AC dynamos.
Electromagnetic Induction
The production of an electromotive force (EMF) and electric current across an electrical conductor caused by a changing magnetic flux through the coil.
Lenz's Law
A law stating that the direction of an induced electromotive force (EMF) and current always acts to oppose the change in magnetic flux that produced it.
Faraday's Law of Electromagnetic Induction
A fundamental law stating that the magnitude of an induced electromotive force is directly proportional to the rate of change of magnetic flux linkage: ε=−dtdΦ.
Magnetic Flux (ϕ)
The measure of the total magnetic field passing through a single loop or turn of area A, given by ϕ=BAcos(θ), where θ is the angle between the normal of the coil and the magnetic field B.
Magnetic Flux Linkage (Φ)
The total magnetic flux passing through a coil of N turns, given by the expression Φ=Nϕ=BANcos(θ).
Fleming's Right Hand Rule
A rule used to determine the direction of induced current in a conductor moving through a magnetic field: the Thumb indicates Motion/Thrust, the Forefinger indicates the Magnetic Field (B), and the Middle Finger indicates the Induced EMF/Current.

Slip Rings
Brass circular rings attached to the rotating coil shaft of an AC dynamo that rotate with the coil and provide continuous electrical connection to the external circuit.
Brushes
Small carbon blocks held against rotating slip rings by springs to maintain electrical contact between the rotating coil and the stationary external circuit.
Horizontal Coil Position (AC Dynamo)
The orientation where the plane of the coil is horizontal (θ=0∘ to the normal); the magnetic flux linkage is at its maximum (Φ=BAN), but the rate of change of flux is zero (dtdΦ=0), producing an induced EMF of 0V and current of 0A.
Vertical Coil Position (AC Dynamo)
The orientation where the plane of the coil is vertical (θ=90∘ to the normal); the magnetic flux linkage is zero (Φ=0), but the rate of change of flux is at a maximum, producing maximum induced EMF (ε=εmax) and maximum induced current (I=Imax).
Instantaneous Induced EMF (ε)
The induced electromotive force generated by a rotating dynamo coil at any specific time t, given by the equation ε=BANωsin(ωt).
Maximum Induced EMF (εmax)
The peak voltage produced by an alternating current dynamo when sin(ωt)=1 (at θ=90∘), given by εmax=BANω.
Angular Velocity (ω)
The rate of rotation of the dynamo coil, equal to dtdθ and calculated using the rotational frequency f as ω=2πf.
Vector Arrow Notation: Circle with Dot (⊙)
A standard notation representing a magnetic field line, electric field line, or electric current directed out of the page toward the observer (resembling an approaching arrow tip).
Vector Arrow Notation: Circle with Cross (⊗)
A standard notation representing a magnetic field line, electric field line, or electric current directed into the page away from the observer (resembling a receding arrow tail).