1/28
Practice question-and-answer flashcards covering energy forms, the First Law of Thermodynamics, enthalpy, calorimetry, and Hess's Law from Chapter 6.
How is energy defined in chemistry?
Energy is defined as the capacity to do work.
What are the five primary forms of energy identified in chemical systems?
Radiant energy (from the sun), thermal energy (associated with the random motion of atoms and molecules), chemical energy (stored within the bonds of chemical substances), nuclear energy (stored within the collection of neutrons and protons in the atom), and potential energy (available by virtue of an object's position).
What is the SI unit of energy, and how is it defined in fundamental base units?
The SI unit of energy is the joule (J), which is defined as: 1J=1s2kgm2
How is the traditional calorie related to the joule and to nutritional food calories?
The non-SI calorie (cal) is defined such that 1cal=4.184J. A food calorie is different and equals 1kcal (1000cal).
What is the distinction between heat and temperature?
Heat is the transfer of thermal energy between two bodies that are at different temperatures, whereas temperature is a quantitative measure of thermal energy. Temperature does not equal thermal energy.

What type of thermodynamic system is illustrated in the diagram?
An open system, which can exchange both mass (e.g., water vapor) and energy (heat) with its surroundings.
How do closed and isolated systems differ in terms of exchange with the surroundings?
A closed system can exchange energy with its surroundings but cannot exchange mass. An isolated system can exchange neither mass nor energy (exchanges nothing).
What characterizes an exothermic process versus an endothermic process?
An exothermic process gives off heat by transferring thermal energy from the system to the surroundings (ΔH<0). An endothermic process absorbs heat supplied to the system from the surroundings (ΔH>0).
What is a state function in thermodynamics, and what are four primary examples?
State functions are properties determined solely by the current state of the system, regardless of how that condition was achieved. Key examples are energy (U), pressure (P), volume (V), and temperature (T).
Why is work (w) not considered a state function?
Work is not a state function because the amount of work done depends on the specific path taken between the initial and final states rather than just the states themselves.
What is the statement and equation for the First Law of Thermodynamics?
Energy can be converted from one form to another, but cannot be created or destroyed. Mathematically: ΔUsystem+ΔUsurroundings=0 or ΔUsystem=−ΔUsurroundings
How is the change in internal energy (ΔU) expressed in terms of heat (q) and work (w)?
ΔU=q+w, where q is the heat exchange between system and surroundings, and w is the work done on or by the system.
What are the sign conventions for work (w) and heat (q)?
Work done by the system on surroundings has a negative sign (−); work done on the system by surroundings has a positive sign (+). Heat absorbed by the system (endothermic) is positive (+); heat released to surroundings (exothermic) is negative (−).
What equation describes expansion work done by a gas against a constant external pressure?
w=−PΔV, where P is the external opposing pressure and ΔV is the volume change (Vfinal−Vinitial). If a gas expands against a vacuum (P=0), then w=0.
What is the conversion factor between litre-atmospheres (L⋅atm) and joules (J)?
1L⋅atm=101.325J
How is enthalpy (H) related to internal energy (U) at constant pressure?
At constant pressure, where q=ΔH and w=−PΔV, internal energy change is ΔU=ΔH−PΔV, which rearranges to ΔH=ΔU+PΔV.
What rules must be followed when manipulating thermochemical equations?
Why must the physical states of reactants and products be explicitly indicated in thermochemical equations?
Because the enthalpy change depends on the physical state of the substances involved. For instance, melting ice H2O(s)→H2O(l) has ΔH=6.01kJ/mol, whereas vaporizing liquid water H2O(l)→H2O(g) has ΔH=44.0kJ/mol.
How are ΔU and ΔH related for chemical reactions involving gases at constant temperature?
ΔU=ΔH−RTΔn, where R is the gas constant (8.314J/(K⋅mol)), T is temperature in Kelvin, and Δn=(moles of gas products)−(moles of gas reactants).
What is the difference between specific heat (s) and heat capacity (C)?
Specific heat (s) is the amount of heat required to raise the temperature of one gram of a substance by one degree Celsius (1∘C). Heat capacity (C) is the amount of heat required to raise the temperature of a given quantity (m) of the substance by 1∘C, with C=m×s.
What formulas are used to calculate the heat (q) absorbed or released during temperature change?
q=m×s×Δt or q=C×Δt, where Δt=tfinal−tinitial.

What laboratory apparatus used in constant-volume calorimetry is shown in the diagram?
A constant-volume bomb calorimeter, where no heat enters or leaves the isolated assembly (qsys=0), giving qrxn=−(qwater+qbomb) and measuring ΔU=qrxn.

What type of calorimetry setup is shown in the diagram?
A constant-pressure (coffee-cup) calorimeter, used to measure heats of reaction in solution where ΔH=qrxn.

What chemical compound, used in moth repellents and studied in bomb calorimetry, is represented by this molecular structure?
Naphthalene (C10H8).
What is the standard enthalpy of formation (ΔHf∘) of a compound?
The heat change that results when one mole of a compound is formed from its constituent elements in their most stable states at a pressure of 1atm.
What is the standard enthalpy of formation of an element in its most stable allotropic form?
It is defined as zero. For example, ΔHf∘(O2)=0 and ΔHf∘(C, graphite)=0, whereas less stable forms have non-zero values such as ΔHf∘(O3)=142.2kJ/mol and ΔHf∘(C, diamond)=1.90kJ/mol.
How is the standard enthalpy of reaction (ΔHrxn∘) computed from formation enthalpies?
ΔHrxn∘=∑nΔHf∘(products)−∑mΔHf∘(reactants), where n and m are stoichiometric coefficients.

What fundamental thermochemical principle is illustrated by this enthalpy level diagram?
Hess's Law: when reactants are converted to products, the overall change in enthalpy is identical whether the reaction occurs in one step or in a series of steps, because enthalpy is a state function.

What hydrocarbon molecule is shown in this ball-and-stick model?
Acetylene (C2H2), which has a standard enthalpy of formation of ΔHf∘=226.6kJ/mol.