1/119
The exuding of bitumen onto the pavement surface; causing a reduction in skid resistance.
BLEEDING
Wearing away of the pavement surface caused by dislodging of aggregated particles and binder.
RAVELING
Elevation differences between adjacent slabs at transverse joints.
FAULTING
Localized upward buckling and shattering of the slabs at transverse joints or cracks.
BLOWUPS
An application of hot bitumen material given to the old surface to provide adhesion to the old and new road surface.
TACK COAT
A very thin surface applied over a bituminous pavement to make it impervious.
SEAL COAT
The application of one or two layers of bituminous material over a prepared base, each layer covered with an application of cover materials and rolled.
SURFACE DRESSING
The layer of pavement which finally carries the load from the road.
SUB-GRADE
Cannot be used for soil stabilized roads with cement/lime.
WEARING SURFACE
The component of the road structure which receives traffic load and transfers it to the subgrade.
BASED
Cracks forming large interconnected polygons, usually with sharp corners or angles.
BLOCK CRACKING
Cracks approximately at right angles to the pavement centerline.
TRANSVERSE CRACKING
Cracks approximately parallel to the pavement centerline.
LONGITUDINAL CRACKING
A series of interconnected or interlaced cracks caused by fatigue failure of the asphalt concrete surface under repeated traffic loading.
ALLIGATOR CRACKING
Signs used to guide drivers through a change in horizontal alignment of the road.
CHEVRON SIGNS
Warns road users of conditions on or adjacent to the road that may be unexpected or hazardous.
WARNING SIGN
Device mounted on a fixed support or portable whereby a specific message is conveyed by means of words or symbols.
TRAFFIC SIGNS
Inform and advise road users for directions, distance, routes, the location of services and points of interest.
GUIDE SIGNS
Color of the loading and unloading zone marking.
RED
The color of messages when painted on pavements.
WHITE
Limit of messages when painted on a pavement.
THREE (3)
The geometrical shape of No Passing Zone warning signs.
PENNANT
The geometrical shape of School Crossing signs.
PENTAGON
The geometrical shape of warning signs used in traffic control.
DIAMOND
The geometrical shape of guide signs used in traffic control/regulatory signs.
RECTANGLE
The geometric shape of Stop sign.
OCTAGON
The geometrical shape of recreational use guide signs.
TRAPEZOID
The geometric shape of Yield Sign.
EQUILATERAL TRIANGLE WITH ONE POINT DOWN
A type of thermoplastic lane marking designed to aid and provide motorists with visual, audio, and motion warnings on the road.
RUMBLE STRIPS
Defined as the number of vehicles per unit distance occupying a section of roadway at a given instant time.
DENSITY
The separation between the corresponding points on two successive vehicles minus the separation occupied by a vehicle.
GAP
The number of vehicles moving in a specified direction on a given lane or roadway that pass a given point during specified unit time.
TRAFFIC VOLUME
The number of vehicles occupying a unit length of lane roadway at a given instant.
TRAFFIC DENSITY
The ability of a roadway to accommodate traffic volume.
TRAFFIC CAPACITY
The maximum sustained 15-minute rate of flow, expressed in passenger cars per hour lane.
FREEWAY CAPACITY
The maximum number of passenger cars that can pass a given point on a lane or roadway during one hour.
ROAD CAPACITY
Defined as the maximum safe speed that can be maintained when conditions are so favorable that the design feature of the highway govern.
DESIGN SPEED
The average of the spot speed of all vehicles passing a given point in the highway.
AVERAGE SPEED
The average speed of vehicles in a certain road length at any time.
SPACE-MEAN SPEED
The instantaneous speed of a vehicle at a specific section or location.
SPOT SPEED
The speed distribution of vehicles at a point on the roadway.
TIME-MEAN SPEED
The time interval between the passage of successive vehicles moving in the same lane.
TIME HEADWAY
The time interval between the arrival of a vehicle wishing to cross an uninterrupted stream of vehicles.
LAG
Divided arterial highway for through traffic with full or partial control of access.
EXPRESSWAY
Ideal capacity of a road.
1200 VPH
Reaction time used for road safety design.
2.5 SECONDS
The speed limit appropriate on a very high standard expressway which has a low crash rate.
100 KPH
The time linked with the two stages of perception and intellection based on a particular traffic situation.
EMOTION
Time required for transmission of the sensations received (through eyes, ears, and body) to the brain and the spinal cord by the nervous system, to a particular traffic situation.
PERCEPTION
After perception occurs, the formation of new thoughts and ideas, recalling old memories of similar occasions to a particular traffic situation.
INTELLECTION
The total time required for perception, intellection, emotion, and volition from the instant the object comes in the line of sight of the driver to the instant he arrives at a decision.
REACTION TIME
The time taken to make a decision to produce action in response to the traffic situation.
VOLITION TIME
Distance travelled by the vehicle after the application of the brakes until it stops.
BRAKING DISTANCE
Minimum sight distance required for a driver to stop a vehicle after seeing an object in the vehicle's path without hitting that object.
STOPPING SIGHT DISTANCE
The distance ahead that must be clear to permit safe passing.
PASSING SIGHT DISTANCE
The distance between successive vehicles moving in the same lane measured from head-to-head at any instance.
SPACE-HEADWAY
The basic unit of travel behavior involving movement from a single origin to a single destination.
TRIP
Type of reflectorized markings.
RETRO REFLECTOR RAISED PAVEMENTS MARKERS
Type of reflectorized markings.
HAZARD MARKS
Type of reflectorized markings.
DELINEATOR
Type of joint in cement concrete pavements.
EXPANSION JOINT
Type of joint in cement concrete pavements.
CONTRACTING JOINT
Type of joint in cement concrete pavements.
WARPING JOINT
Type of pavement and curb marking.
LONGITUDINAL LINES
Type of pavement and curb marking.
TRANSVERSE LINES
Type of pavement and curb marking.
OTHER LINES
Type of pavement and curb marking.
OTHER MARKINGS
Basic way of resolving crossing conflicts in traffic.
TIME SHARING
Basic way of resolving crossing conflicts in traffic.
SPACE-SHARING
Basic way of resolving crossing conflicts in traffic.
GRADE SEPARATION
Major track component of a railway.
BALLAST
Major track component of a railway.
TIES
Major track component of a railway.
RAIL
Traffic conflicts that occur when vehicles enter a traffic stream.
MERGING CONFLICTS
Component in stopping sight distance.
REACTION
Component in stopping sight distance.
BREAKING RESISTANCE
The water level that guarantees about 98% of tide is safe to ships.
DESIGN LOW TIDE (DTL)
The arithmetical mean value of the highest one-third of the waves for a stated interval.
SIGNIFICANT WAVE HEIGHT
Waves in which the ratio of water depth to the water length is greater than 0.5.
DEEP WATER WAVES
Waves which occur in water having a depth less than one-half of the wave length.
SHALLOW WATER WAVE
Regular occurrence at certain locations of a high crested single or solitary type of wave caused by the rush of flood tide.
TIDAL BORE
The tide which occurs at or near the time when the moon is new or full.
SPRING TIDE
When the line connecting the earth with the sun and the moon form a right angle.
NEAP TIDE
An abnormal rise of the sea level that occurs when a typhoon passes by.
STORM SURGE
Waves created by large, sudden impacts such as earthquakes, volcanoes, or landslides that ends up in the ocean.
TSUNAMIS
Wind generated waves created in the deep ocean at some distance from the port site.
SWELLS
An open water of navigable depth.
FAIRWAY
A marine structure for the mooring or tying up of vessels, for loading and unloading cargo or for embarking and disembarking passengers.
PIER
A berth structure which projects out into the water from the shore.
JETTY
The process of widening, enlarging, cleaning, or deepening of channels in harbors, rivers, and canals.
DREDGING
A dock which is parallel to the shore, which can be used for docking on one side only.
WHARF
The pressure against a vertical wall due to waves.
CLAPOTIS
An instrument used to measure the intensity of wind.
BEAUFORT SCALE
The distance that the wind blows over the sea in generating waves.
FETCH
The ratio of the wave height to its length.
STEEPNESS
A maximum wave height and wave period of the maximum wave height in wave train.
HIGHEST WAVE
This is done after edging and hand jointing operations.
FLOATING
Steel-troweled concrete surfaces are made nonslip by producing a textured surface.
BROOMING
A manner of moving a straight-edge back and forth with saw-like motion across the forms.
SCREEDING
Done on slabs that are to be left exposed or to receive thin finishes.
TROWELING