* Ch.6 X-ray Circuit *

0.0(0)
Studied by 5 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/63

encourage image

There's no tags or description

Looks like no tags are added yet.

64 Terms

1
New cards

What are the three main components of the entire x-ray imaging system?

The tube, the operating console, and the high voltage generator

2
New cards

What is the main function of the x-ray imaging system?

To provide a controlled flow of electrons to produce high-quality x-rays with minimal radiation exposure

3
New cards

What energy levels are regular diagnostic x-ray imaging systems identified by?

Approximately 25-150 kVp and 100-1200 mA

4
New cards

What are the three main circuits of the x-ray imaging system?

Primary circuit, secondary circuit, and filament circuit

5
New cards

What components are found in the primary circuit?

Main power switch, circuit breakers, autotransformer, timer circuit, and primary side of the step-up transformer

6
New cards

What components are found in the secondary circuit?

Secondary side of the step-up transformer, mA meter, rectifier bank, and x-ray tube (except filaments)

7
New cards

What components are found in the filament circuit?

Rheostat, step-down transformer, and the filaments

8
New cards

Where is the primary or low-voltage side located?

At the operating console

9
New cards

What is the purpose of the filament circuit?

To provide electrons for the x-ray tube current

10
New cards

What does the operating console control?

Voltage applied to the x-ray tube, current through the tube, and exposure time (kVp, mA, and exposure time)

11
New cards

What voltage does the x-ray imaging system operate on?

220 volts

12
New cards

What is the function of the line meter?

Measures how much voltage is coming into the circuit

13
New cards

What is the function of the line compensator/selector?

Adjusts voltage to ensure a precise 220 V is sent to the autotransformer

14
New cards

What does the autotransformer do?

Operates on self-induction with a single winding; supplies a precise voltage to the filament and high-voltage circuits

15
New cards

What is kVp adjustment responsible for?

Determines the quality or penetrability of the x-ray beam

16
New cards

How do the kVp major and minor selectors function?

kVp major selector adjusts in tens; kVp minor selector adjusts in ones

17
New cards

What does the kVp meter do?

Pre-reads the kilovoltage that will be applied

18
New cards

What determines the number of electrons crossing from cathode to anode?

The temperature of the filament, which controls mA (tube current)

19
New cards

What controls the filament temperature?

The filament current (amperage)

20
New cards

Where is the exposure timer circuit located?

On the primary side of the high-voltage transformer

21
New cards

What are the four types of exposure timers?

Synchronous, electronic, mAs timer, and automatic exposure control (AEC)

22
New cards

What is a synchronous timer?

Operates with a synchronous motor at 60 revolutions per second; shortest exposure time is 1/60 second

23
New cards

What is an electronic timer?

Most sophisticated, accurate, and complex timer used in most modern equipment

24
New cards

What is an mAs timer?

Monitors the product of mA and time and terminates exposure once the desired mAs is reached

25
New cards

What is an AEC timer?

Automatic exposure control; terminates exposure when the correct amount of radiation is received, typically set at 1.5 times the expected exposure

26
New cards

What is the difference between photodiode and ion chamber AEC detectors?

Photodiode detectors are behind the image receptor (older method); ion chambers are in front of the receptor (most common)

27
New cards

What are the three primary parts of the high-voltage generator?

High-voltage transformer (step-up), filament transformer (step-down), and rectifiers

28
New cards

What is the function of the step-up transformer?

Converts voltage to kilovoltage for x-ray production

29
New cards

What is the function of the step-down transformer?

Reduces current from amps to milliamps for filament heating

30
New cards

Why is AC current required in transformers?

To induce current through electromagnetic induction

31
New cards

What is rectification?

The process of converting alternating current (AC) to direct current (DC)

32
New cards

What device performs rectification?

Diodes

33
New cards

What is the function of diodes in the x-ray circuit?

Allow current to flow in one direction only, ensuring electron flow from cathode to anode

34
New cards

What happens with unrectified power?

Negative half of the AC cycle is wasted, resulting in poor image quality and inefficient x-ray production

35
New cards

What is the main purpose of rectification?

To provide positive power flow, reduce patient exposure time, and protect the x-ray tube by ensuring current flows cathode to anode only

36
New cards

How many pulses per second are produced in a single-phase full-wave rectified unit in the U.S.?

120 pulses per second

37
New cards

How many pulses per second are produced in a three-phase full-wave rectified unit?

360 pulses per second

38
New cards

What is voltage ripple?

The percentage fluctuation in voltage from zero to peak during x-ray production

39
New cards

What is the ripple for different power systems (Single-phase half or full wave)?

100% ripple

40
New cards

What is the ripple for different power systems (Three-phase, 6-pulse)?

14% ripple

41
New cards

What is the ripple for different power systems (Three-phase, 12-pulse) and ?

4% ripple

42
New cards

What is the ripple for different power systems (High-frequency)?

43
New cards

What is the advantage of high-frequency generators?

Less than 1% voltage ripple, more consistent output, reduced patient dose, and better image quality

44
New cards

What is the disadvantage of high-frequency generators?

They are more expensive

45
New cards

What is a capacitor discharge generator?

Uses stored charge from capacitors; voltage falls approximately 1 kV/mAs during exposure

46
New cards

Where are high frequency generators commonly used?

In mobile radiography

47
New cards

What is a falling-load generator?

A generator where mA drops during exposure to prevent overheating; used in high-capacity tubes like CT or IR

48
New cards

Which generator type provides the shortest exposure time for a given mAs?

Falling-load generator

49
New cards

How does kVp behave during capacitor discharge exposures?

It decreases throughout the exposure

50
New cards

How does kVp behave during falling-load exposures?

It remains constant throughout the exposure

51
New cards

What type of power supply gives the most consistent and high-quality x-ray beam?

Three-phase or high-frequency generators

52
New cards

What power rating formula is used for three-phase and high-frequency generators?

Power (kW) = (mA × kVp) / 1000

53
New cards

What power rating formula is used for single-phase generators?

Power (kW) = (0.7 × mA × kVp) / 1000

54
New cards

What determines focal spot size?

The mA selector

55
New cards

Where is the mA meter connected?

At the zero tap point on the high-voltage side (no voltage present)

56
New cards

What corrects for variations in power distribution to the x-ray machine?

The line voltage compensator

57
New cards

A diode allows electrons to flow in which direction?

From the cathode to the anode

58
New cards

A full-wave rectified three-phase unit provides how many x-ray pulses per second?

360 pulses per second

59
New cards

A single-phase waveform has what percent voltage ripple?

100%

60
New cards

What is the relationship between generator type and patient dose?

Better (higher phase) generators reduce patient dose and produce better image quality

61
New cards

Why is the step-up transformer named as such?

Because it has more windings on the secondary side than on the primary side

62
New cards

What are the key sections of the x-ray circuit?

Control console (low voltage), high voltage x-ray tube circuit, and filament circuit

63
New cards

What is the main voltage supplied to the x-ray imaging system from the power line?

220 V alternating current (AC)

64
New cards

What is the typical line frequency in the U.S. that determines pulse rate?

60 Hz