1/15
Looks like no tags are added yet.
A company needs to connect two buildings several miles apart with high bandwidth and EMI resistance. Which cable should be used?
Fiber-optic cable.
A technician needs to connect switches across a long distance. Which fiber type is best?
Single-mode fiber (SMF).
A technician connects devices within a building over shorter fiber distances. Which type is appropriate?
Multimode fiber (MMF).
A technician needs a small fiber connector commonly used on network equipment. Which connector should they identify?
LC connector.
Which fiber connector types should a network technician recognize?
LC, SC, ST, and MPO/MTP.
A cable provider needs to bring service from the street into a home. Which coaxial cable is commonly used?
RG-6.
A technician needs a shorter coaxial connection for composite video. Which cable is commonly appropriate?
RG-59.
A customer uses cable internet. Which physical cable commonly carries the provider's signal?
Coaxial cable.
A technician needs to verify Ethernet wiring and cable continuity. Which tool should be used?
Cable tester.
A technician needs to attach an RJ-45 connector to an Ethernet cable. Which tool is required?
Crimper.
A technician is terminating Ethernet wires into a patch panel. Which tool seats the wires?
Punch-down tool.
A network cable disappears into a wall. Which tools can help locate its other end?
Tone generator and probe.
A technician suspects a network port cannot properly send and receive data. Which device tests the port?
Loopback plug.
A wireless network experiences interference. Which tool shows nearby networks, signal strength, and channel usage?
Wi-Fi analyzer.
A technician needs to capture and inspect network packets. Which tool should be used?
Protocol analyzer or packet sniffer.
A technician needs to measure electrical voltage while troubleshooting a circuit. Which tool is appropriate?
Multimeter.