1/122
Looks like no tags are added yet.
electromagnetic induction was demonstrated by
Michael Faraday
what did Faraday discover
magnetic lines of force and the wire of the conductor must have motion relative to each other to produce an ellectrical current
what are the required components of electromagnetic induction
- magnetic field
- conductor
- relative motion
what are the methods to induce a current
1. move conductor through stationary unchanging strength magnetic field
2. move magnetic lines of force through a stationary conductor with an unchanging strength magnetic field
3. vary the magnetic flux strength from a stationary magnet through a stationary conductor
What are the two primary laws of electromagnetics?
Faraday's Law and Lenz's Law
faraday's law
first law of electromagnetics
Len's Law
second law of electromagnetics
what are the 4 factors of faraday's aw
- strength of the magnetic field
- speed of motion between lines of force and conductors
- angle between lines of flux and conductor
- number of turns in conductor
Len's law definition
induced current flow creates opposing magnetic fields
what are the types of induction
mutual induction and self induction
mutual induction
occurs when two coils are placed in proximity and a varying current supplied to the first coil induces a similar flow in the second coil
primary coil
coil supplied with current
secondary coil
coil in which the current is inducted
why does the flow occur in the secondary coil
Because the primary current alternates
what does the secondary coil demonstrate
moving lines of force from a varying current will induce electron flow in the wire through which it passes
self induction
more complicated, with a coil supplied with alternating current
when does self induction occur
regularly
when is alternating current present
when electrons constantly change direction
what does a coil supplied with alternation current permit
a steady stream of electrons and establishes an electromagnetic effect for half a cycle
generators
Convert mechanical energy to electrical energy
motors
convert electrical energy to mechanical energy
motor principle
the conductor will begin to move due to magnetic attraction and repulsion of the two separate wires making up the conductor
transformers are used to
change voltage
what is the application of transformers
mutual induction and ohm's law
what are the two currents of transformers
- current supplied to primary coil
- secondary coil in close proximity
transformer law equation
Vs/Vp = Ns/Np
transformer law
voltage induced in secondary coil directly related to number of turns on secondary coil
transformer law applied to ohm's law
current induced in secondary coil is inversely related to voltage and number of turns in primary coil
transformer law applied to Ohm's law formula
Is/Ip=Vp/Vs
Is/Ip=Np/Ns
step-up transformer (voltage and number of turns relationship)
the number of coils on the secondary side increases; voltage increases
step-down transformer (voltage and number of turns relationship)
the number of coils on the secondary side decreases; voltage decreases
all transformers must operate on what type of current
AC
ohm's law
V=IR
what does AC current provide for transformer
the collapsing (varying) magnetic field that will induce voltage in the 2nd coil
what is the collapsing magnetic field used for
to change electricity by combining electromagnetic mutual induction with the application of ohm's law
relationship between voltage and the number of turns
directly proportional
relationship between the number of turns and amperage
inversely proportional
step-up transformer (voltage, amperages, number of turns)
voltage increases; amperage decreases; secondary turns are greater than primary
step-down transformer (voltage, amperages, number of turns)
voltage decreases; amperage increases; secondary turns are less than primary
what do step-up and step-down transformers refer to
voltage
transformers can change
both voltage and amperage
transformers are used
to increase or decrease voltage
tranformers efficiency is
usually above 95%
I2R loss is also known as
copper loss
I2R loss is caused by
inherent resistance to current flow found in all conductors
Hysteresis Loss
lagging loss
the power loss is _____ to the ____ of the current
proportional; square
the power loss is reduced by
- using high voltage, low amperage
- using large diameter copper, which has an inherent low resistance
lost power is given off as
heat
what reduces I2R loss
high voltage; low amperage
where does hysteresis loss occur
in the core
why does hysteresis loss occur
energy is expended as the continually changing AC current magnetizes and demagnetizes the core material
what happens during demagnetism
some dipoles remain in the original orientation, and this residual magnetism causes re-magnetism to lag and produces more heat loss
coercivity
The characteristic that requires energy to carry out the constant reorientation of the magnetic dipoles.
how can coercivity be reduced
by using core material
what is an example of core material
silicon iron
where does eddy current loss occur
in the core
what does eddy current loss result from
currents opposing the cause that produced them
according to who's law are eddy current loss produced is any conducting material subjected to changing magnetic fields
Len's law
true/false: eddy current loss is produced in any conducting material subjected to changing magnetic fields
true
what reduces eddy current loss
laminating the core
how does laminating the core reduct eddy current loss
dividing the core into thin layers which reduces the strength of eddy current
transformers are _____ in the transformers cabinet
insulated
why are transformers insulated in the transformers cabinet
to reduce heat to exterior surface although the heat can still be felt
tranformer configurations
- air-core
- closed-core
- shell-type
- open-core
air-core transformers
two coils close to each other
open-core transformers
the primary and secondary coils are filled with an iron core to enhance the magnetic lines of force and increase magnetic field strength
closed-core transformers
place a top and bottom to the cores better directs the lines of force from primary and secondary cores toward each other and increases net increase in field strength
Shell type transformers
converging the inside and outside of the lines of force through an iron core. this minimizes distances between coils and maximizes coupling effectiveness of induction
what type of transformers do x-ray generators use
laminated cores; shell-type transformers
where is the power supplied to the x-ray imaging system delivered first
autotransformer
step-up transformers (voltage supply)
the voltage supplied from the autotransformer to the high voltage transformer
it is much safer and easier to
control low voltage and then increase to kV ten to try to control its magnitude
autotransformer
has a single winding and is designed to supply a precise voltage to the filament circuit and to the high-voltage circuit of the x-ray imaging system.
primary connections
the two connections A and A' conduct the input power to the autotransformer
Where are secondary connections located in relation to primary connections?
Closer to the end of the winding.
What is the function of secondary connections in an autotransformer?
They allow the autotransformer to increase voltage.
What is an autotransformer?
An autotransformer is a type of transformer that can adjust voltage levels.
What is the maximum voltage an autotransformer can step-up to?
An autotransformer can step-up its voltage to approximately twice the input.
What type of transformer is needed to convert volts to kilovolts (kV)?
A true step-up transformer is needed to convert volts to kV.
two designs of an autotransformer
- primary and secondary coils connected in series
- single coil on central core
what does the primary side of an autotransformer allow
for selection of active turns in coil
What is the function of an autotransformer in an x-ray circuit?
It is used to vary the incoming line voltage to an appropriate level for increased voltage in the step-up transformer.
What does a step-up transformer do in an x-ray circuit?
It increases voltage from the incoming line voltage to the kV range necessary for x-ray production.
What is the purpose of the filament step-down transformer in an x-ray circuit?
It decreases voltage to 5-15 volts and 3-5 amps to heat the filament for thermionic emission of electrons.
3 important transformers in an x-ray circuit
- autotransformers
- step-up transformers
- filament step-down transformers
capacitors
accumulates and stores electrical charge
what does the design of capacitor consist of
- two oppositely charged metal plates
- separated by dielectric
what kind of charge do the 2 metal plates in a capacitor have
opposing charges
what does the opposing charges in a capacitor create
repulsion
what does repulsion permit in a capacitor
greater number of electrons to be stored on each plate
the insulator between two plates of a capacitor is
dielectric
what is dielectrics value determined by
- plate size
distance between the plate
farad (f)
unit of capacitance
capacitor equation
C=Q/V
how do you apply change to use capacitor equation
direct current
the capacitor will accept a charge until it is
DC voltage
when discharged, the capacitor
has the ability to deliver the stored charge in short controllable intervals
x-ray tubes operate best when
receiving direct current
the current must flow in one direction only within the tube to ensure
electrons flow in one direction