1/99
Looks like no tags are added yet.
Integrated training
A comprehensive approach that attempts to improve all components necessary for an athlete to perform at the highest level and prevent injury.
Functional
strength
The ability of the neuromuscular system to contract eccentrically, isometrically, and concentrically in all three planes of motion.
Neuromuscular
efficiency
The ability of the Human Movement System to allow agonists, antagonists, synergists, and stabilizers to work synergistically to produce force, reduce force, and dynamically stabilize the entire Human Movement System.
Stretch-shortening
cycle
An active stretch (eccentric contraction) of a muscle followed by an immediate shortening (concentric contraction) of that same muscle.
Length-tension
relationship
The resting length of a muscle and the tension the muscle can produce at this resting length.
Force-couple
Muscle groups moving together to produce move- ment around a joint.
Altered reciprocal
inhibition
Muscle tightness that causes decreased neural drive to its functional antagonist.
Synergistic
dominance
Compensation by synergists for a weak or inhibited prime mover in an attempt to maintain force production and functional movement patterns.
Flexibility
The ability of the Human Movement System to have optimal ROM as well as neuromuscular control throughout that ROM in order to prevent injury and enhance functional efficiency.
Rate coding
Muscular force can be amplified by increasing the rate of incoming impulses from the motor neuron after all prospective motor units have been activated.
Rate of force
production
How quickly a muscle can generate force.
OPT Model Phase 1
Stabilization Endurance Training
OPT Model Phase 2
Strength Endurance Training
OPT Model Phase 3
Hypertrophy Training
OPT Model Phase 4
Maximal Strength Training
OPT Model Phase 5
Power Training
OPT Model Phase 6
Maximal Power Training
Stabilization
strength
The ability of the stabilizing muscles to provide dynamic joint stabilization and postural equilibrium during functional activities.
Kinesiology
The study of human movement.
Biomechanics
A physics term involving the study of how forces affect a living body.
Ground reaction force
An equal and opposite external force that is exerted back onto the body by the
Sagittal Plane
Bisects the body into right and left halves.
Frontal Plane
Bisects the body into front and back
Transverse Plane
Bisects the body to create upper and lower halves.
Plumb line
A vertical line of reference consisting of a cord with plumb bob attached to one end.
Concentric
Developing tension while a muscle is shortening; when developed tension overcomes resistive force.
Eccentric
Developing tension while a muscle is lengthening; when resistive force overcomes developed tension.
Isometric
When the contractile force is equal to the resistive force.
Force
An influence applied by one object to another, which results in an acceleration or deceleration of the second object.
Arthrokinematics
Joint motion.
Class I lever
The fulcrum is between the force and the load.
Class II lever
The load is between the force and the fulcrum.
Class III lever
The most common in the body, the pull is between the load and the fulcrum.
Agonists
Muscles that act as prime movers. For example, the gluteus maximus is the prime mover for hip extension.
Antagonists
Muscles that act in direct opposition to prime movers. For example, the psoas is antagonistic to the gluteus maximus.
Synergists
Muscles that assist prime movers during functional movement patterns. For example, the hamstring and the erector spinae are synergistic with the gluteus maximus during hip extension.
Stabilizers
Muscles that support or stabilize the body while the prime movers and the synergists perform the movement patterns.
Contraction
The activation of a force within a muscle to produce an action at a joint.
Motor behavior
Motor response to internal and external environmental stimuli.
Motor control
How the CNS integrates internal and external sensory information with previous experience to produce a motor response.
Motor learning
The integration of motor control processes with practice and experience that leads to relatively permanent changes in the body's capacity to produce skilled movements.
Motor Development
The change in motor skill behavior over time-throughout the lifetime.
Proprioception
The cumulative neural input from sensory afferents to the CNS.
Internal feedback
Sensory information provided by the body via length-tension relationships, force-couple relationships, and arthrokinematics to monitor movement and the environment.
External feedback
Information provided by some external source.
Cumulative injury
cycle
A cycle whereby an "injury" will induce inflammation, muscle spasm, adhesions, altered neuromuscular control, and muscle imbalances.
All-or-none principle
When a muscle fiber is stimulated to contract, the entire fiber contracts completely.
Atrophy
The loss in muscle fiber size.
Sarcopenia
A decrease in muscle fiber numbers.
Static Stretching
Static stretching combines low-force and long-duration movements.
Neuromuscular Stretching
NMS is based on influencing the neurophysiological mechanisms of autogenic inhibition and reciprocal inhibition.
Dynamic stretching
Use of a muscle's own force production and momentum to take a joint through the full available range of motion.
Aerobic
With the use of Oxygen
Anaerobic
Without the use of oxygen
Karvonen Method
[(208 - (0.7 X Age)) - RHR] X desired % for training + RHR = HRmax
Heart Rate Training Zone 1
Zone 1 is 65-75% of HRmax and is used for recovery, or lower intensity.
Heart Rate Training Zone 2
Zone 2 is 76-85% of HRmax and is closer to the anaerobic threshold (AT), or higher intensity.
Heart Rate Training Zone 3
Zone 3 is 86-95% of HRmax and is considered closer to peak training, which
is just below HRmax, but above anaerobic threshold.
Long-slow distance
A type of training that maintains a slower speed so the individual can cover longer distances.
Race pace
The pace in time or % maximum heart rate that an individual will use for competitive racing.
Percent of maximum heart rate pace
The intensity of training an individual will use based upon their actual or estimated heart rate maximum.
High-intensity
interval training
(HIIT)
Training at or above 90% VO2 peak for bouts lasting for seconds to minutes.
Off-Season Training Goal
Steady-state training should be used for base training
Preseason Training Goal
Increasing intensities through interval training to prepare for the season
In-Season Training Goal
Light to moderate sport-specific training to maintain gains
Post-season Training Goal
Light steady-state training for active recovery
Local core stabilizers
Muscles that attach directly to the vertebrae.
Global core stabilizers
Muscles that attach from the pelvis to the spine.
Movement system
Includes muscles that attach the spine and/or pelvis to the extremities.
Drawing-in maneuver
A maneuver used to recruit the local core stabilizers by drawing the navel in towards your spine.
Mechanoreceptors
specialized neural receptors embedded in connective tissue that convert mechanical distortions of the tissue into neural codes to be conveyed to the CNS.
Ruffini afferents
Joint receptors that are mechanically sensitive to tissue stresses that are activated during extremes of extension and rotation.
Paciniform afferents
Large, cylindrical, thinly encapsulated, multi-cellular end organ structures mechanically sensitive to local compression and tensile loading, especially at extreme ranges of motion.
Golgi afferents
High-threshold, slow- adapting sensory receptors in ligaments and menisci that are mechanically sensitive to tensile loads and are most sensitive at the end ranges of motion.
Nocioceptors
Small-diameter afferents located primarily in articular tissue and sensitive to mechanical deformation and pain.
Dynamic joint stabilization
Refers to the ability of the kinetic chain to stabilize a joint during movement.
SAQ
Speed, agility, and quickness
Principle of Specificity
This states the body will adapt to the specific demands placed upon it.
SAID Principle
Specific Adaptation to Imposed Demands
Mechanical specificity
Refers to the weight and movements placed on the body.
Neuromuscular
specificity
Refers to the speed of contraction and exercise selection.
Metabolic specificity
Refers to the energy demand required for a specific activity.
Principle of Overload
The principle of overload involves providing the appropriate training stimulus to elicit optimum physical, physiological, and performance adaptations.
Principle of Variation
Planned variations in a resistance training program are essential to enable continuous adaptations over a training period while preventing injury.
Principle of Individualization
It is important to consider the athlete's age, general medical history, injury history, training background, work capacity, recoverability, structural integrity, training needs or goals, and sport.
General Adaptation
Syndrome
The Human Movement System's ability to adapt to stresses placed upon it.
Henneman's size
principle
The principle that smaller motor units are recruited before larger, more powerful motor units.
Muscular Endurance
Muscular endurance is the ability to produce and maintain force production over prolonged periods of time.
Hypertrophy
Hypertrophy is the enlargement of skeletal muscle fibers in response to being recruited to develop increased levels of tension.
Strength
Strength is the ability of the neuromuscular system to produce internal tension to overcome an external load.
Power
The ability to generate force as quickly as possible.
Training volume
Amount of physical training performed within a specified time period.
Training Frequency
The number of training sessions performed over a specified time period (usually 1 week).
Training Duration
The timeframe of a workout (including warm-up and cool-down) or the length
of time spent in one phase of training.
Exercise Density
The combination of volume, rest intervals, and the length of a training session.
Exercise selection
The process of choosing appropriate exercises for a client's program.
Macrocycle
Generalized training plan that spans 1 year to show when the athlete will progress between phases.
Mesocycle
Generalized training plan that spans 1-3 months and shows which phases will be required each day of each week.
Microcycle
Training plan of specific workouts that spans 1 week, to show which exercises are required each day of the week.
Corrective exercise
training
A form of training designed to correct muscle imbalances, joint dysfunctions, neuromuscular deficits, and postural distortion patterns developed during the season. This may be a form of training an athlete may have to start in before starting phase 1 of the OPTTM model.