1/123
Looks like no tags are added yet.
Ideal dispersion
Dispersion in which particles do not interact and are uniform in size, showing Brownian movement.
Real dispersion
Dispersion in which particles are not uniformly sized and are subject to aggregation (clumping).
Becomes more heterogeneous
What happens to a real dispersion with time.
Flocculation
Light, fluffy conglomerates held together by weak van der Waals forces.
Aggregation
Process in which particles adhere by stronger forces (compacted cake).
Caking
Growth and fusing of crystals in the precipitate to give a solid aggregate.
Flocculated system
System with loose aggregates (floccules).
Deflocculated system
System in which particles are individual entities.
Flocculated system
System with rapid settling that is easily resuspended, with a large sediment volume.
Deflocculated system
System with slow settling and a small, compact sediment.
Flocculated system
System that forms no cake and is easy to redisperse.
Deflocculated system
System that aggregates to a hard cake (caking: YES).
Flocculated system
System with a clear boundary and clear liquid above the sediment.
Deflocculated system
System whose supernatant stays cloudy after settling.
Free settling
Settling in dilute suspensions (< 2 g/100 mL) that obeys Stokes' law.
Hindered settling
Settling in concentrated suspensions (≈ 5 g/100 mL) that does NOT obey Stokes' law.
Subsidence
Term describing settling in a flocculated system.
v = d²(ρ₁ - ρ₂)g / 18η (Stokes' law)
Equation for the rate of sedimentation.
Particle diameter
The meaning of d in Stokes' law.
Densities of the dispersed phase and the medium
The meaning of ρ₁ and ρ₂ in Stokes' law.
Gravity
The meaning of g in Stokes' law.
Viscosity of the medium
The meaning of η in Stokes' law.
Particle size, viscosity of the medium, density difference
The three factors the rate of sedimentation depends on.
Smaller particles, higher viscosity, smaller density difference
The conditions that give slower settling.
Sedimentation volume (F)
The ratio of ultimate sediment volume to original suspension volume.
F = Vu / Vo
Formula for sedimentation volume.
Ultimate sediment volume
The meaning of Vu.
Original suspension volume
The meaning of Vo.
1 (range 0-1)
The ideal value of F.
No clear supernatant
What F = 1 means for the supernatant.
Degree of flocculation (β)
The ratio F / F∞.
F of the deflocculated suspension
The meaning of F∞ in the degree of flocculation.
As flocculated a product as possible
The aim when using the degree of flocculation.
Structured vehicle
Approach to a physically stable suspension in which particles are kept deflocculated using a pseudoplastic/plastic vehicle that entraps particles so no settling occurs.
Hydrophilic colloid
Example of a vehicle used to entrap particles in a structured vehicle.
Flocculation
Approach to a physically stable suspension that applies flocculation principles to form flocs that settle easily.
With minimum agitation
How flocculated suspensions are resuspended.
Wetting
The first stage in preparing a dispersion.
Hydrophobic powders
Powders with a large contact angle that are not easily wetted.
Sulfur, charcoal, Mg stearate
Examples of hydrophobic powders.
Hydrophilic powders
Powders with a low contact angle that are easily wetted.
ZnO, talc, Mg carbonate
Examples of hydrophilic powders.
Wetting agents
Surfactants that lower the advancing contact angle.
Electrolytes
Material that reduces the electrical barrier by decreasing zeta potential, giving a loose structure.
Monobasic K phosphate, AlCl₃
Examples of electrolytes used to control flocculation.
Surfactants
Material, both ionic and nonionic, that brings about flocculation.
Polymers
Long-chain, high-MW material where part adsorbs on the particle and the rest projects into the medium.
Bridging
The mechanism by which polymers cause flocculation.
Hydrophilic polymers, gelatin
Examples of pseudoplastic polymers.
Suspending agent
Agent added to retard sedimentation.
CMC, Carbopol 934, Veegum, tragacanth, bentonite
Examples of suspending agents.
Pseudoplastic
The type of flow that ideal suspending agents have.
Tragacanth, sodium alginate, sodium CMC
Examples of ideal pseudoplastic suspending agents.
Bentonite + CMC
The combination that makes an excellent medium, both thixotropic and pseudoplastic (gel on standing, fluid when disturbed).
As small as possible
The particle size that stabilizes a dispersion.
High
The particulate concentration that stabilizes a dispersion.
Particle-particle interaction (similar charge, deflocculated)
What to avoid to stabilize a dispersion.
Densities
What to manipulate to stabilize a dispersion.
Viscosity
What to increase in the medium to stabilize a dispersion.
Emulsion
Heterogeneous system in which at least one immiscible liquid is dispersed in another as droplets (diameter usually > 0.1 µm).
Emulsifying agent
The third component that prevents coalescence and keeps droplet integrity.
Thermodynamically unstable
The thermodynamic stability of an emulsion.
Oil-in-water (O/W)
Emulsion with an aqueous continuous phase.
Water-in-oil (W/O)
Emulsion with an oil continuous phase.
O/W
Emulsion used as medicinal emulsions for oral administration.
W/O
Emulsions used as externally applied emulsions and foods (mayonnaise, butter).
Nonionic surfactants, acacia, tragacanth, gelatin, polyvalent soaps (Ca palmitate)
Emulsifiers of O/W emulsions.
Sorbitan esters, cholesterol, wool fat
Emulsifiers of W/O emulsions.
O/W
Emulsion with oil globules in water that conducts, is dye-dispersible, and is water-dilutable.
W/O
Emulsion with water globules in oil that does not conduct, has dye clumps, and is not water-dilutable.
Dye solubility test
Test in which methylene blue or brilliant blue is used.
Dye dissolves and diffuses uniformly
The result of the dye solubility test in an O/W emulsion.
Dye lies in clumps on the surface
The result of the dye solubility test in a W/O emulsion.
Dilution test
Test in which the emulsion is mixed with water.
Freely mixes with water
The result of the dilution test in an O/W emulsion.
Does not dilute with water
The result of the dilution test in a W/O emulsion.
Electric conductivity test
Test that checks whether the emulsion conducts current.
O/W
The emulsion type that conducts current.
W/O
The emulsion type that does not conduct current.
O/W
Emulsion type that conveniently delivers oil-soluble vitamins.
IV emulsions
Emulsions for patients unable to assimilate oral nutrition.
Radiopaque emulsions
Emulsions used for diagnosis.
Cosmetic lotions and creams
Other pharmaceutical products made as emulsions.
Formation of foams
What emulsification gives rapidly.
Surface-tension theory
Theory in which surfactants lower the interfacial tension between the immiscible liquids.
Oriented-wedge theory
Theory in which monomolecular layers of emulsifier curve around a droplet of the internal phase.
Plastic / interfacial film theory
Theory in which the emulsifier forms a thin adsorbed film at the oil-water interface around droplets.
Surface-active agents
Class of emulsifying agent that forms a monomolecular film adsorbed at the O/W interface and reduces interfacial tension.
Hydrophilic colloids
Class of emulsifying agent that forms a multimolecular film around oil droplets (O/W).
Finely divided solids
Class of emulsifying agent made of adsorbed particles at the interface between the two liquids.
Hydrophile-lipophile balance
The meaning of HLB.
HLB > 10
The HLB of hydrophilic surfactants, which give O/W emulsions.
HLB 1-10
The HLB of lipophilic surfactants, which give W/O emulsions.
No coalescence of the internal phase, no creaming, and elegance (color, appearance, odor) maintained
The three features of a physically stable emulsion.
Flocculation and creaming; coalescence and breaking; phase inversion; miscellaneous physical/chemical changes
The modes of emulsion instability.
Creaming
Instability process that is reversible, with upward or downward movement of droplets.
Upward
Direction of creaming in an O/W emulsion, because the dispersed oil is less dense.
Downward
Direction of creaming in a W/O emulsion, because the heavier water globules settle.
Agitation, viscosity builders/thickeners, homogenization, matching phase densities
Ways to prevent creaming.
Coalescence / breaking
Instability process that is irreversible, where the film around globules is destroyed and the oil merges.