1/25
Flashcards covering natural materials, biorefinery classifications, renewable platforms, petroleum feedstock economics, and refinery separation and conversion processes.
Biorefinery
An industrial facility that integrates conversion processes and equipment to produce fuels, power, heat, and value-added chemicals from renewable biological feedstocks.
Biomass
Renewable organic matter derived from living or recently living organisms, with global production estimated at approximately 50 billion tons each in the ocean and on land annually.
Cellulose
An abundant structural linear polysaccharide of plant cell walls composed of repeated D-glucose units linked by β-(1,4)-glycosidic bonds.
Starch
A plant storage carbohydrate polymer consisting of glucose units linked by α-(1,4)-glycosidic bonds that is broken down much more easily by enzymes than cellulose.
Lignin
A complex, three-dimensional aromatic network polymer in plant cell walls formed from monolignol precursors including coniferyl alcohol, sinapyl alcohol, and p-coumaryl alcohol.
Collagen
A structural animal protein found in connective tissues composed of tropocollagen triple helices rich in glycine, proline, and hydroxyproline residues cross-linked into fibers.

Biorefinery Classification Framework
The system used to classify biorefineries across four distinct elements: feedstocks, conversion platforms, conversion processes (mechanical, chemical, biochemical), and target products.
Biorefinery Platform
Intermediate molecular building blocks (such as C5 and C6 sugars, syngas, biogas, or lignin) with impurities and inhomogeneity removed, serving as standardized precursors for fuels and materials.

Biofuel Generations
The classification of biological feedstocks based on source: First Generation (food crops), Second Generation (non-food lignocellulose), Third Generation (algae), and Fourth Generation (engineered microorganisms and advanced synthetic pathways).
Biogas
A fuel gas mixture produced by anaerobic digestion, composed predominantly of 45–65%CH4 and 30–40%CO2, alongside trace amounts of H2S, NH3, N2, H2O, and H2.
Syngas
A gaseous platform mixture composed primarily of carbon monoxide (CO) and hydrogen (H2) generated through thermochemical gasification of carbonaceous material.

Bio-derived Materials
Polymeric materials and composites derived from biological origin, including bio-polymers (e.g., starch polymers, PLA, PHA), bio-composites with natural fibers, and mineral-reinforced composites.
Crude Oil (Petroleum)
A naturally occurring, unrefined fossil fuel mixture of hydrocarbons containing alkanes, cycloalkanes, and aromatic rings formed from ancient organic sediment deposits.
Barrel of Oil
A standard unit of crude oil measurement equivalent to 159L, weighing approximately 148kg based on an average petroleum density of roughly 0.93kg/L.
Atmospheric Distillation
The initial physical petroleum refining stage conducted at 101.3kPa to fractionate hydrocarbons by boiling points up to approximately 350∘C.
Vacuum Distillation
The distillation of heavy residues under reduced pressure (7–13kPa at around 150∘C) to lower boiling temperatures and avoid unwanted thermal decomposition and coking.

Crude Distillation Fractions
Refinery cuts separated by boiling range, spanning light ends (<90∘F, C1–C4), light virgin naphtha (90–220∘F, C5–C8), heavy virgin naphtha (220–315∘F, C8–C12), kerosene (315–450∘F, C12–C30), diesel/light gas oil (450–650∘F, C30–C50+), heavy gas oil (650–800∘F), and residuum (800+∘F, C50–C100+).
Naphtha
A light petroleum distillate fraction containing C5–C12 hydrocarbons used primarily as feedstock for steam crackers to generate olefins or for catalytic reforming into high-octane gasoline.
Thermal Cracking
A non-catalytic, endothermic refinery process operating at 850–900∘C that breaks long-chain alkanes into smaller molecules via a free-radical chain reaction to yield olefins like ethylene and propylene.
Beta-Scission
A unimolecular free-radical propagation step in thermal cracking where the carbon-carbon bond beta to the radical center fragments, yielding an alkene and a shorter free-radical chain.
Fluid Catalytic Cracking (FCC)
A refinery conversion method that contacts high-boiling hydrocarbon feeds with a hot, fluidized fine powdered acid catalyst under moderate pressure, cracking them via carbocation intermediates into gasoline and olefinic gases.
Catalytic Reforming
A chemical refining process involving acid-catalyzed ring isomerization of cycloalkanes followed by platinum-catalyzed dehydrogenation (∼560∘C) to synthesize high-octane BTX aromatics and hydrogen.
BTX
A mixture of three aromatic petrochemical building blocks consisting of benzene, toluene, and xylene isomers, generated through catalytic reforming or naphtha cracking.
Hydrotreating
A catalytic process that reacts petroleum cuts with hydrogen to remove sulfur impurities as H2S, reduce alkene unsaturation, and produce stable base stocks for fuels and synthetic oils.
Poly-alpha-olefins (PAO)
Synthetic hydrocarbon oligomers manufactured by polymerizing linear 1-alkenes (such as 1-decene) followed by hydrogenation, serving as high-performance lubricant base oils.
Gray Hydrogen
Hydrogen produced from fossil hydrocarbon cracking or steam methane reforming where the carbon dioxide byproduct (∼7kg CO2 per kg H2) is released directly into the atmosphere.