AFCAR & PCAR OPTIMIZED

How long does a holder of a certificate issued under 14 CFR Part 65 have to notify the authority after any change in permanent mailing address?

• 30 days

• 90 days

• 120 days

30 days

A certification confirming that the maintenance work to which it relates has been complied with in accordance with the applicable standards of airworthiness using approved data.

• Aircraft Tags

• Service Manual

• Maintenance Release

Maintenance Release

Any maintenance operation requiring the opening of cold and hot sections of a turbine is considered

• Powerplant major repair

• Preventive maintenance

• Powerplant major alterations

Powerplant major repair

Removal, installation, and repair of landing gear tires in PCAR 5.1.1.2 is?

• Airframe minor alteration

• Airframe minor repair

• Preventive Maintenance

Preventive Maintenance

Installation of an accessory that is not approved for the engine is an example of

• Powerplant major repair

• Preventive maintenance

• Powerplant major modification

Powerplant major modification

Which is considered to be typical preventive maintenance operations (Part IS 5.1.1.2)

• Removal, installation, and repair of landing gear tires.

• Replacing defective safety wiring or cotter keys.

• All of the choices are correct

All of the choices are correct

All Philippine registered aircraft used in general aviation shall be re-weighed

• Every 2 years

• Every 5 years

• Every 3 years

Every 5 years

Who is responsible for maintaining the aircraft from unairworthy condition?

• Pilot in Command

• CAAP/Authority

• Licensed Aircraft Maintenance/Mechanic

Licensed Aircraft Maintenance/Mechanic

If an aircraft is not approved for return to service after an annual inspection and it needs to fly to another location to perform a modification,

• The engineering department must seek a temporary repair.

• The owner must obtain a special flight permit.

• The certified mechanic must approve the release to service.

The owner must obtain a special flight permit.

When overhauling electrical equipment, all necessary information should be obtained from

• Maintenance instructions published by the aircraft or equipment manufacturer.

• Illustrated parts manual for the aircraft.

• The aircraft maintenance manual.

Maintenance instructions published by the aircraft or equipment manufacturer.

A special flight permit may be issued for an aircraft that may not currently meet applicable airworthiness requirements but is capable of a safe flight for the purposes of (PCAR 5.4.1.4)

• All of the choices are correct.

• Not to exceed 10 hrs TBO.

• Not more than 10 hrs of TBO.

All of the choices are correct.

Calibration and repair of instruments is an example of (Part IS: 5.1.1.2)?

Choices:

• Components major repair

• Appliance major repair

• Appliance major alterations

Appliance major repair

The owner of an aircraft or, in the case of a leased aircraft, the lessee, shall be responsible for maintaining the aircraft in an airworthy condition

Choices:

• All of the choices are correct.

• Authorized maintenance personnel make appropriate entries in the aircraft maintenance records certifying that the aircraft is airworthy.

All of the choices are correct.

Owners or operators of airplane over 5,700 kg and helicopters over 3,175 maximum take-off weight shall report to the Authority and to the organization responsible for the aircraft type design any failure, malfunction, or defect be made within

Choices:

• 5 working days

• 10 working days

• 3 working days

3 working days

Refinishing decorative coating of fuselage, wings, tail group surfaces (excluding balanced control surfaces), fairings, cowling, landing gear, cabin, or cockpit interior when removal or disassembly of any primary structure or operating system is not required is

Choices:

• Airframe minor repair

• Preventive maintenance

• Airframe major repair

Preventive maintenance

Replacing defective safety wiring or cotter pins is

Choices:

• Progressive maintenance

• Preventive maintenance

• Routine maintenance

Preventive maintenance

Simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operation is known as

Choices:

• Preventive maintenance

• Powerplant/airframe minor repair

• Appliance major repair

Preventive maintenance

Disassembly of a crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is an example of (Part IS.5.1.1.2)

Choices:

• Powerplant minor repair

• Powerplant minor alteration

• Powerplant major repair

Powerplant major repair

The alteration of an aircraft or aeronautical product in conformity with an approved standard is called

Choices:

• Alteration

• Replacement

• Modification

Modification

The state that has jurisdiction over the organization responsible for the final assembly of the aircraft engine or propeller.

Choices:

• State of Manufacture

• State of Registry

• State of Design

State of Manufacture

Special repair to structural engine parts by welding, plating, metalizing, or other methods is an example of (Part IS: 5.5.1.2)

Choices:

• Powerplant major alterations

• Preventive maintenance

• Powerplant major repair

Powerplant major repair

Conversions of any sort for the purpose of using fuel of a rating or grade other than that listed in the engine specifications is (Part IS 5.1.1.2 )

• Powerplant major modification

• Airframe major alterations

• Powerplant major repair

Powerplant major modification

Standard certificate of airworthiness directives, special certificate of airworthiness directives, and certificate of airworthiness issued for restricted or limited category aircraft, as long as the maintenance, preventive maintenance and alterations are performed, are effective for how many year/s?

3 years

5 years

1 year

1 year

An applicant for an AMT license for Powerplant and Airframe ratings relying solely on practical experience shall provide documentary evidence of

24 months of practical experience

30 months of practical experience

60 months of practical experience

60 months of practical experience

walang ques 25

walang ques 25

No person may assign, nor shall any person perform maintenance functions for aircraft unless that person had a minimum rest period of how many hours prior to beginning of duty?

10 hrs

8 hrs

6 hrs

8 hrs

The restoration of an aircraft/aeronautical product using methods, techniques, and practices acceptable to the Authority, INCLUDING disassembly, cleaning, and inspection as permitted, repair as necessary, and reassembly; and tested in accordance with approved standards and technical data, or in accordance with current standards and technical data acceptable to the Authority, which have been developed and documented by the State of Design, holder of the type certificate, supplemental type certificate, or a material, part, process, or appliance approval under Parts Manufacturing Authorization (PMA) or Technical Standard Order (TSO).

• Rebuild

• Repair

• Overhaul

Overhaul

Who is responsible for ensuring that all aircraft maintenance records are kept up to date?

• Aircraft owner

• Inspector

• CAAP

Aircraft owner

The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, WHEN IT HAS BEEN disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits.

• Repair

• Overhaul

• Rebuild

Rebuild

Changes to the basic design of the fuel or oil system is considered

• A preventive maintenance

• Airframe major modification

• Airframe minor modification

Airframe major modification

An experimental certificate for research and development, showing compliance with regulations, crew training, or market survey, after the date of issue or renewal unless the authority prescribes a shorter period, are effective for how many year/s?

• 3 years

• 1 year

• 5 years

1 year

What is the regulatory definition of preventive maintenance?

• Simple or minor preservation operations and the replacement of small standard parts, not involving complex assembly operations.

• The restoration of an aircraft/aeronautical product using methods, techniques, and practices acceptable to the Authority.

• The alteration of an aircraft/aeronautical product in conformity with an approved standard.

Simple or minor preservation operations and the replacement of small standard parts, not involving complex assembly operations.

Removal of accessories that are listed as required equipment on the aircraft or engine specification is an example of

• Powerplant minor alteration

• Powerplant minor repair

• Powerplant major modification

Powerplant major modification

A document signed by an authorized representative of an Approved Maintenance Organon (AMC) inspect to an inspection, repair, or modification on a complete aircraft, engine, or propeller after that received maintenance performed (Part 5.1.12)

• Airworthiness Certificate

• Maintenance Release

• Return to Service

Return to Service

An Aviation Maintenance Technician or Specialist who seeks reinstatement of his/her license that has already expired for 24 months from expiration date shall

• Need to pass the Knowledge Test only.

• Pass the Civil Aviation Regulations test and must undergo the appropriate recurrent training from an Approved Maintenance Organization, or any school or facility accredited by the Authority for such purpose.

• Attend training in an Approved Maintenance Organization.

Pass the Civil Aviation Regulations test and must undergo the appropriate recurrent training from an Approved Maintenance Organization, or any school or facility accredited by the Authority for such purpose.

All Philippine registered aircraft used for commercial or aerial work operations shall be re-weighed

• Every 5 years

• Every 2 years

• Every 3 years

Every 3 years

The Contracting State which approved the original type certificate and any subsequent supplemental type certificates for an aircraft, or which approved the design of an aeronautical product or appliance.

• State of Design

• State of Registry

• State of Manufacturer

State of Design

In situations involving unscheduled aircraft unserviceability, persons performing maintenance functions for aircraft may be continued on duty for

• Up to 8 consecutive hours; or 12 hours in 24 consecutive hours.

• Up to 12 consecutive hours; or 16 hours in 24 consecutive hours.

• Up to 16 consecutive hours; or 20 hours in 24 consecutive hours.

Up to 16 consecutive hours; or 20 hours in 24 consecutive hours.

The installation or removal of equipment of equal or less weight and in the same location as the last listed as optional equipment in the aircraft specifications is

• An airframe minor alteration.

• An airframe minor repair.

• An airframe major alteration.

An airframe minor alteration.

The restoration of an aircraft, engine, propeller or associated part to an airworthy condition in accordance with the appropriate airworthiness requirements after it has been damaged or subjected to wear.

• Rebuild

• Repair

• Overhaul

Repair

No person may schedule a personnel to perform a maintenance task on an aircraft for more than how many consecutive hours of duty?

• 6 hrs

• 12 hrs

• 8 hrs

12 hrs

The contracting state on whose register is entered.

• State of Manufacture

• State of Registry

• State of Design

State of Registry

Replacing or cleaning spark plugs and setting of spark plug gap clearance is considered as? (Part IS 5.1.12)

• Powerplant major repair

• Powerplant major alterations

• Preventive maintenance

Preventive maintenance

Rewinding the field coil of an electrical accessory is an example of?

• Airframe Minor Repair

• Airframe Minor Alteration

• Appliance Major Repair

Appliance Major Repair

No person or entity, other than the Authority, may approve an aircraft, airframe, aircraft engine, propeller, appliance, or component part for return to service after it has undergone maintenance, preventive maintenance, rebuilding, or modification, except as provided in the following

• A pilot licensed by the Authority may return his or her aircraft to service after performing Authorized preventive maintenance.

• An AMO may approve aircraft and aeronautical products for return to service as provided in the specifications approved by the Authority.

• All of the choices are correct.

All of the choices are correct.

Modification of the basic design not made in accordance with the recommendations of the appliance manufacturer or in accordance with applicable airworthiness directives is considered as (Part IS: 5.1.1.2)

• Appliance major repair

• Appliance major modification

• Airframe major alterations

Appliance major modification

Calibration of avionics or computer equipment is an example of?

• Appliance Major Repair

• Appliance Major Modification

• Preventive Maintenance

Appliance Major Repair

Replacing any cowling not requiring removal of the propeller or disconnection of flight controls is considered

• Component minor repair

• Preventive maintenance

• Airframe minor repair

Preventive maintenance

A holder of an AMT license desiring to renew must accomplish and submit the requirements within how many days prior to the expiry of his/her license?

• 90 days

• 30 days

• 120 days

30 days

Who is authorized to repair an aircraft instrument?

• Mechanic

• Aircraft Avionics

• Certified repair station approved for that instrument

Certified repair station approved for that instrument

Change to the hub design?

• Propeller Major Repair

• Propeller Major Modification

• Powerplant minor repair

Propeller Major Repair

An applicant for an AMT license and any associated rating shall be at least

• 21 years old

• 20 years old

• 18 years old

18 years old

In compliance with the recent experience requirements, a licensed AMT may not exercise the privileges of his/her license or rating unless he/she served as an AMT under his/her license and rating for at least 6 months within the preceding

• 24 months

• 36 months

• 48 months

24 months

What is classified as a major repair?

• Replacing bulbs, reflectors, and lenses of position and landing lights.

• Splicing of skin sheets.

• Replacing elastic shock absorber cords on landing gear.

Splicing of skin sheets.

Who is responsible for maintaining an aircraft's airworthy condition including compliance with all airworthiness directives? (PCAR 5.3.1.2)

• Pilot

• Registered owner or operator

• Aircraft engineer

Registered owner or operator

A special flight permit may be issued for an aircraft that may not currently meet applicable airworthiness requirements, but is capable of safe flight when:

1. Flying the aircraft to a base where repairs, alterations, or maintenance are to be performed, or to a point of storage. 2. Delivering or exporting the aircraft.

3. Production flight testing new production aircraft.

4. Evacuating aircraft from areas of impending danger.

5. Conducting customer demonstration flights in new production aircraft that have completed production flight tests.

Which statements are correct?

• 1 and 2.

• 3, 4, and 5.

• All of the statements are correct.

All of the statements are correct.

The Approved Maintenance Organization (AMO) shall relieve the person performing maintenance functions from all duties for 24 hours after working for

• 5 Consecutive Days

• 7 Consecutive days

• 3 Consecutive days

7 Consecutive days

The AMO shall relieve the person performing maintenance functions from all duties for how many consecutive hours during any 7 consecutive day period?

• 16 hrs

• 12 hrs

• 24 hrs

24 hrs

A certificate or rating issued to an approved maintenance organization is valid for how many year/s from the date of issuance subject to compliance with the AMO procedure manual?

• 5 years

• 1 year

• 3 years

5 years

Fabrication performed in the wing main ribs and compression members is a (IS: 5.1.1.2):

• Airframe Major Modification

• Airframe Minor Repair

• Airframe Major Repair

Airframe Major Repair

An example of powerplant major repair is:

• Piston removal

• All of the choices are correct

• Cylinder removal

All of the choices are correct

Following unscheduled duty periods, the person performing maintenance functions for an aircraft shall have mandatory rest period of:

• 10 hrs

• 6 hrs

• 8 hrs

10 hrs

A permanent record of every maintenance (not including preventive maintenance) repair of building or alterations on any airframe, powerplant, propeller, or appliance shall be maintained by

• An appropriate licensed aircraft mechanic.

• The maintenance crew chief.

• The registered operator

The registered operator

Which part of Philippine Civil Aviation Regulation prescribes the requirements for certification of an aircraft and aeronautical components for continuing airworthiness?

• PCAR Part 5

• PCAR Part 2

• PCAR Part 8

PCAR Part 5