1/120
Looks like no tags are added yet.
What is the functional unit of the kidney? How many? At what level does each kidney work?
The nephron is the functional unit of the kidney, it is what filters the blood and forms urine.
There are 1 million nephrons per kidney, and they do not regenerate
only need about 200,00 nephrons for the kidneys to function properly, as they have a huge renal reserve and kidney works at only half their capacity
What are 6 kidney functions
1) Regulation of ECF volume
adjust the amount of fluid in the body, as a result, it has a long-term effect on MAP
2) Regulation of ECF osmolarity
Osmolarity of blood is 280 mOsm. If it increases/decreases, the kidney can reabsorb/secrete more water to regulate it
3) Maintenance of ion balance
Important for the functioning of the nervous system. Also, to maintain an equivalence of charges in fluids
4) Regulation of pH
CO2 + H2O → H2CO3 → H+ + HCO3
if blood pH increases, the kidney can reabsorb more H+ and secrete HCO3+ to decrease pH
If blood pH decreases, the kidney can secrete more H+ and reabsorb HCO3+
5) Excretion of waste products
Proteins + Nucleic acids → nitrogenous waste → removed from the body via urine
Proteins → deamination → ammonia → liver → urea
Nucleic acids → nitrogenous base → uric acid
Xenobiotics (foreign substances)
6) Hormone production
EPO and renin
What is the blood flow of the kidney?
Renal artery → afferent arteriole (larger diameter) → glomerulus → efferent arteriole (smaller diameter) → peritubular capillaries (also delivers O2 to the kidney) → renal veins
What is unique to the portal system of the kidney?
arteriole - capillary - arteriole capillary arrangement is unique to the kidneys
Variability of nephrons
Where do they all originate? What are the types?
All nephrons originate from the renal cortex (renal corpuscle + PCT + DCT), what dips into the medulla is the loop of henle
1) Cortical nephrons (80 - 85%)
Originate high in the renal cortex and have small LoH that slightly dip in the medulla
2) Juxtamedullary nephrons (15 - 20%)
Located at the junction between the renal cortex and medulla, and have long LoH
What are the two functional units of the nephron?
Renal corpuscle - consists of the glomerulus and glomerular capsule
Function: filter plasma and form ultrafiltrate
Renal tubules - PCT, LoH, and DCT
Adjust the filtrate via reabsorption and secretion
Renal corpuscle
Glomerulus: How much plasma does it receive, function, what is it made out of
20% of CO → 1L ml/min → 60% is plasma → Renal plasma flow = 600 ml/min → Kidneys filter 20 -25 % → GFR = 125 ml/min
The glomerulus is the site of production for the ultrafiltrate
Made out of simple squamous epithelium
Renal corpuscle
Glomerular capsule: Function, what are its two layers
Blind ended, double walled cup that completely surrounds the glomerulus
Parietal layer: outer wall made out of simple squamous epithelium, important structural component as it guides filtrate to PCT, but serves no role in filtration
Visceral layer: made out of specialized cells called podocytes that have pedicels that interdigitate
Filtration apparatus
What is it
Layers
The filtration membrane is the name given to the collection of structures that allows the free passage of water and solutes, but not proteins or formed elements
1) Fenestrations (slits) of the glomerular capillary endothelium
Make the capillary more leaky, filters out formed elements
2) Basal lamina: refers to the fused basement membranes of the glomerulus and podocytes
The basal lamina forms the slit membrane, which prevents the filtration of large sized proteins and also has a negative charge (coarse sieve)
3) Filtration slits: the pedicels of podocytes interdigitate and connect to the BM of the glomerulus. The clefts between the slits are called filtration slits
filtration slits: allows filtrate to pass into the capsular space (area between the parietal and visceral layer of glomerular capsule)
medium sized proteins
How much more permeable is the glomerulus?
The glomerulus is 100 - 1000x more permeable than other capillaries but much more selective as it does not allows proteins are formed elements to be filtered
Renal tubules
components and function
PCT + LoH + DCT
Modifies ultrafiltrate by reabsorbing and secreting
PCT
Made out of
Function
Type of transport
Osmolarity
PCT is made out of simple cuboidal epithelium that have microvilli and a large amount of mitochondria for greater SA for reabsorption and energy production
PCT is where the majority of nutrients are reabsorbed from the filtrate back into the peritubular capillaries. Such as glucose, ions, aa, vitamins, and HCO3+
As the composition of ultrafiltrate is the same as the plasma a lot of primary and secondary active transport takes place for solutes to be reabsorbed. Water is reabsorbed via osmosis, as it follows solutes through aquaporins, as a result the osmolarity of the filtrate does not change
PCT - Transportation
What are three things receptors are subjected to?
Carries are subject to specificity, competition, and saturation. When the transport maximum of carriers is reached and the solutes begin to spill into the urine. Renal threshold refers to the concentration of plasma when the solute first appears in urine
LoH - general function
Function of the descending limb
Dilutes/concentrates ultrafiltrate by moving water and salts independently
Descending limb: Permeable to H2O and concentrates urine.
As filtrate (280mOsm) moves down the descending limb, which dips into the salty (greater osmolarity) medulla, water begins to leave through aquaporins and follow the solutes into the medulla. As a result the osmolarity of the filtrate increases, becoming more concentrated
LoH
function of ascending limb
AL is permeable to solutes, and impermeable to H2O as there are no aquaporins. As filtrate moves up Na+ first leaves the filtrate passively, down its CG. As filtrate moves further up, active transport pumps Na+ out. As a result the osmolarity of filtrate decreases and becomes hypoosmotic as Na+ is being removed and water remains
How does the length of the LoH influence water reabsorption?
The longer the LoH, more H2O can be reabsorbed
The shorter the LoH, less H2O can be reabsorbed.
DCT
Function
What specialized cells does it have
Where peritubular capillaries secrete wastes such as K+ and H+(blood → filtrate), further fine-tune the filtrate
1) Intercalated cells: Reabsorb/secrete H+, balancing the H+ concentration
2) Principal cells: located in the DCT and CD, when targeted by the ADH it increases the permeability of the DCT and CD to water, allowing it to be reabsorbed
The Three Steps in Urine Formation
1. Glomerular filtration – filtration of plasma through glomerular capillaries which then becomes ultrafiltrate. Happens exclusively in the glomerular capillaries
2. Tubular reabsorption – important constituents of urine are taken back into body. This includes water, glucose, amino acids and bicarbonate. Most of this takes place in the PCT
3. Tubular secretion – release of waste or things that we no longer want in our bodies into the urine. This is typically things like acid, creatinine, penicillin, and PAH. Most of this takes place in the DCT
Glomerular filtration
GHP forces fluids and solutes through glomerular capillaries and filtration apparatus which then becomes ultrafiltrate. The rate at which the fluid is is forced out of the capillary is referred to as the GFR
Factors that affect GFR
Variation in factors affect NFP have a great effect on GFR
Blood pressure increases and decreases: changes in MAP are compensated for between the range of 50 -150 mmHg. At these pressures any change in the pressure entering the glomerulus is compensated for by changing the diameter of arterioles.
CHP: back pressure (an increase in CHP) due to an obstruction can stop or damage the kidneys, decreasing GFR
Plasma oncotic pressure (GOP): Lack of protein in the blood can greatly increase the GFR and greatly decrease the reabsorption of water
Facilitated diffusion and Active tubular reabsorption
While facilitated diffusion is still with a gradient, so it does not require ATP, active transport is against a gradient so it requires ATP. Common substances that are transported includes the following: glucose, amino acids, vitamins, sodium, calcium, chloride, potassium, phosphate.
Each substance is linked to a protein so there is a transport maximum or Tm (the number of molecules that can be carried across). If the amount filtered exceeds this maximum it will show up in the urine. A good example is glucose in the urine of a diabetic.
The renal Tm is the amount of glucose that can be actively pumped out of the renal tubule per unit time. Anything that has a concentration that exceeds renal Tm will result in that substance appearing in the urine. Therefore, most of the excessive blood glucose of a diabetic cannot be absorbed so it will pass into the urine and be lost by the body.
Clearance
Is a measurement used to analyze kidney activity (filtering +processing different solutes). Defined as
the volume of plasma (ml) that was cleared from given solute in a a given amount of time (min)
Clearance formula
Cl= UV/P
U= concentration of solute in urine
V= urine production rate (ml/min)
P= concentration of solute in plasma
U and P always have the same units so they cancel each other and Cl ends in mL/min
Interpreting Cl
Cl=0
0<Cl<125ml/min
Cl=125ml/min
125 < Cl<600 ml/min
Cl= 600 ml/min
Cl=0: solute if full reabsorbed/ not filtered
0<Cl<125ml/min: solute is partially reabsorbed/ net reabsorption
Cl=125ml/min: solute is neither secreted or reabsorbed
125 < Cl<600 ml/min: solute in partially secreted/ net secretion
Cl= 600 ml/min: solute is fully secreted
What substance can have a clearance of 125ml/min?
Inulin, a non natural molecule used to measure GFR.
It is small enough to pass through the fenestrations and become part of the ultrafiltrate, but has no channels, so it cannot be reabsorbed or secreted. Therefore the Cl of inulin is = to the GFR
Why is the maximal clearance rate 600 ml/min?
The max. Cl rate is approx. 600ml/min because the kidneys cannot clear more plasma than they receive in one minute
Starling Forces
What does it determine? Positive or negative?
Net filtration pressure is the main determinant of the GFR, our homeostatically regulated variable, as they are directly proportional.
We always want the NFP to be (+) because if it is (-), it essentially means urine is being reabsorbed
NFP - Formula
NFP = (Glomerular hydrostatic pressure (GHP) + Capsular oncotic pressure (COP) ) - ( Glomerular oncotic pressure (GOP) + Capsular hydrostatic pressure (CHP) )
NFP = (GHP + COP) - (GOP + CHP)
NFP : Forces in capillary
What are they
Normal #
GHP : Pressure pushing on the filtration apparatus. 45mmHg
GOP : Pulling of proteins in the glomerulus 25mmHg
NFP: Forces in the corpuscle
What are they
Normal numbers
CHP: Normally pretty low at 5 mmHg if there is no obstruction in the nephron as the filtrate continues to flow. If there is an obstruction (i.e., a kidney stone), it causes backup, and CHP increases. In some cases, it can increase to the point where the filtrate stops, but usually the capsule swells and bursts (a kidney cyst).
COP: should be equal to zero because normally there are no proteins in the filtrate. 0mmHg
NFP = (GHP+COP) - (GOP + CHP)
Strongest filtering force?
Normal value
GHP is the main force out because COP is normally 0, as there are no proteins in the filtrate
NFP is usually + 15 mmHg, with an average range of +10 - +15 mmHg (favoring filtration)
What is the glomerular filtration rate (GFR)? What determines it?
Is the volume of filtrate formed per minute by the kidneys (ml/min). It is our homeostatically regulated variable at 125 ml/min, which is determined by the NFP, SA, and membrane permeability.
Afferent and Efferent arteriole: Regulating NFP
NFP, which is primarily determined by GHP, is controlled by changing the diameter of the afferent arteriole. In this case we are controlling Q of the glomerulus, and the QA determines QG.
By constricting afferent arterioles, the RA increases, which decreases the QA and PA . As QA determines the QG and the RG remains constant (because its a capillary). The GHP decreases → which decreases NFP, and as they are directly proportional, the GFR also decreases
By dilating afferent arterioles, the RA decreases, which increases the QA and PA . As QA determines the QG and the RG remains constant (because its a capillary). The GHP increase→ which increases NFP, and as they are directly proportional, the GFR also increases
Efferent arteriole
By constricting the efferent arteriole, the R increases, which increases the GHP → increasing the NFP → increasing the GFR
Do the afferent and efferent arteriole have = innervation?
No, the afferent arteriole has more alpha 1 receptors compared to the efferent arteriole. This is the case because if the innervation was equal, there would be no change in the GFR.
Since MAP determines GHP, how is GFR maintained when MAP begins to deviate?
Since MAP determines GHP, when it increases/decreases the GFR should technically increase/decrease. But because the GFR is our homeostatically controlled variable, if MAP changes within the range of 50 -150 mmHg, GFR remains unaffected because pressure changes are compensated by changing the diameter of arterioles
This is referred to as the “regulated range”
What is the juxtaglomerular apparatus?
Juxtaglomerular apparatus (JGA) is a specialized structure located at the contact between the DCT with the afferent and efferent arterioles. The JGA is important in regulating blood flow and GFR.
It has two specialized cell types: Juxtaglomerular cells (JG) and Macula Densa
JGA: JG cells and Macula Densa
Location and functions
JG cells
Are enlarged smooth muscle cells in the wall of the afferent arteriole. They have mechanoreceptors and senses BP in the afferent arteriole. JG cells can react to this pressure and to communication from Macula densa through tubular glomerular feedback. Additionally they secrete renin, an important hormone that initiates the Renin-Angiotensin-Aldosterone-System (RAAS)
Macula Densa
Specialized simple cuboidal cells inside the DCT. They act as osmoreceptors, mechanoreceptors, and chemoreceptors. They pick up information of filtrate as it passes through the DCT, such as the osmolarity, chemical contents, ions, and pressure. This information is then passes to JG cells via tubuloglomerular feedback
What are the intrinsic mechanisms for GFR?
Renal autoregulation: Under normal circumstances (MAP: 50 -150 mmHg), glomerular BP is autoregulated by the kidney.
1) Myogenic autoregulation
2) Tubuloglomerular feedback
Intrinsic - Myogenic mechanism
What is it
How does it work?
Changing the diameters of the afferent and efferent arterioles to maintain the GHP, which maintains the GFR
If P increases, the arteriole stretches; in response, it constricts to maintain the Q
If P decreases, the arterioles are not stretched enough; in response, the arterioles dilate to maintain Q
P ↓ → BV dilates to ↓ R → maintains flow
Intrinsic - Tubuloglomerular feedback
What is it?
MD cells of the JGA direct this mechanism by regulating Q based on the speed and osmolarity of the filtrate. This information is then communicated to the JG cells, which can change the diameter of the afferent arteriole in response, influencing the GFR
A decrease in flow/an increase in osmolarity is detected by the MD and is communicated to JG cells. In response, JG cells cause afferent arteriole dilation, which will increase GHP (↑NFP) and Q, which increases the GFR and decreases the osmolarity
An increase in flow/decrease in osmolarity is detected by the MD and is communicated to the JG cells. In response, JG cells cause afferent arteriole constriction, which will decrease GHP (↓NFP) and Q in the glomerulus, and as a result, osmolarity increases and GFR decreases
Extrinsic - ANS
What are the two types?
The SNS constricts arterioles and primarily affects the afferent arterioles as it has more alpha 1 receptors.
1) Arteriole constriction through the baroreceptor reflex
2) SNS stimulates JG cells to secrete renin
Extrinsic - ANS: Baroreceptor reflex
drop is MAP
When MAP decreases baroreceptors in the carotid bodies and aortic arch detect this and send information via CN IX to the cardiovascular centers of the medulla oblongata (integrator). The MO will increase sympathetic tone to BV, in this case specifically the afferent arteriole.
By increasing sympathetic tone more NE is released and binds to alpha 1 receptors which causing the vasoconstriction of the afferent arteriole. By decreasing the r4 the R is increased which decreases the Q to the glomerulus which decreases GHP, NFP, and GFR. And by decreasing GFR, urine volume decreases as blood volume increases which increases the MAP
Extrinsic - ANS: Secretion of renin
Renin is a water conservation hormone which activates angiotensinogen into angiotensinogen, the greatest vasoconstrictor in our body. By constricting BV the TPR increases which increases MAP
Extrinsic: Hormones
3 water conserving hormones and 1 water excreting hormone
Extrinsic: Antidiuretic hormone (ADH) or Vasopressin (VP)
Where is it made
Where does it exert its effect
What is the basic action
What does ADH decrease?
Where is it made: ADH is a peptide neurohormone that is produced in the hypothalamus by neurosecretory cells. ADH is then packed in vesicles and, through fast axonal transport, is shipped to the posterior pituitary, where it is stored and released.
Where does it exert its effect: ADH stimulates receptors of the principle cells located in DCT and CD to release aquaporins. It also binds to V1 receptors and causes vasoconstriction of vascular smooth muscle.
What is the basic action: (anti-diuresis: stop pee)
Major: Reabsorption of water to increase blood volume, therefore, MAP
Minor: Vasoconstriction, increases TPR, therefore MAP
ADH also decreases sweat production during periods of dehydration
Extrinsic: ADH
How does it work? Specifics of aquaporin insertion
The release of ADH is controlled through osmoreceptors in the hypothalamus, and baroreceptors detecting a decrease in MAP also signal to the hypothalamus to secrete ADH.
How it works: An increase in osmolarity is detected by osmoreceptors, which signal to the hypothalamus → hypothalamus integrates and sends AP to neurosecretory cells, down the posterior pituitary, which leads to the release of ADN into the blood, which travels to the kidney and targets principal cells in the DCT and CD (binds to V2 receptors). It increases blood volume by increasing the permeability of the DCT and CD to water and allowing greater reabsorption from hypoosmotic filtrate.
Specifics: When ADH binds to its extracellular receptor on principal cells, it leads to the formation of the secondary messenger inside (cAMP). Leading to a series of events that result in the exocytosis of storage vesicles with aquaporins, inserting them on the PM of the principal cell.
ADH: mOsm of blood is over 280 mOsm (hyperoosmotic)
Osmoreceptors in the hypothalamus detect a rise in osmolarity and send information to the hypothalamus. The hypothalamus sends AP down the axons of neurosecretory cells, which results in the release of ADH. ADH travels through the bloodstream and targets principal cells in the DCT and CD, inserting aquaporins and increasing their permeability to water. By reabsorbing water, urine volume increases, blood volume increases, and solutes get diluted, decreasing their osmolarity back to 280 mOsm, and increasing MAP
ADH: mOsm of blood is under 280 mOsm (hypoosmotic)
Osmoreceptors in hypothalamus detect drop in osmolarity and send information to hypothalamus. Hypothalamus sends IPSPs so less ADH is secreted and aquaporins are not added. As a result water cannot be reabsorbed and is excreted with the filtrate. Increasing the volume of urine, osmolarity of blood, and decreasing blood volume and MAP
What effects ADH production?
Increases by
Decreased by
ADH is increased by: increase in osmolarity, pain, stress, trauma, nicotine, morphine, tranquilizers, and anesthetics
ADH is decreased by: alcohol, hyposecretion, and sweat
ADH - Diabetes insipidus
Diabetes insipidus is characterized by the hyposecretion of ADH or receptor insensitivity, where V2 receptors do not respond to ADH. The lack of ADH can cause symptoms like polyuria because water cannot be reabsorbed in the DCT and CD, volume of urine increases, and in severe cases, a person may even pee 25L/day. Additionally, due to polyuria, the person experiences polydipsia, excessive thirst as they continuously pee.
It is similar to diabetes mellitus in symptoms such as polyuria (increase in urine V) and polydipsia, but there is NO sugar in urine when a person has diabetes mellitus
Diabetes mellitus
Diabetes mellitus, on the other hand, is caused by a decrease in insulin production or insensitivity to insulin. Like diabetes insipidus, this can cause symptoms such as polyuria and polydipsia, but it’s not due to the lack of water reabsorption but because carriers of glucose in the PCT reach their transport maximum and cannot completely reabsorb glucose. As glucose begins to spill out of the PCT, through osmotic action, water begins to follow the solutes, increasing the volume of urine and the presence of sugar.
Aldosterone
Produced
Basic Function
Targets
Increased/released in response to
Produced: aldosterone is a mineralocorticoid produced in the adrenal cortex.
Basic function: Primarily increases the reabsorption of Na+ and thereby cause an increase in H2O reabsorption. Which increases blood volume, therefor MAP
Maintains water and electrolyte balance by increasing Na+ reabsorption and K+ excretion in the DCT
Targets: Simple cuboidal epithelial cells in the ascending limb of LoH, increasing the #/activity of sodium reabsorbers
Increased/ released in response to:
1) Drop in MAP (increases by reabsorbing Na+ and H2O following),
2) Low Na+,
3) High K+, and
4) during acidosis, as many of the Na+ reabsorbed are in exchange for H+
Aldosterone: How does it reabsorb more Na+ and water?
As aldosterone is a steroid hormone its has nuclear/cytosolic receptors. When aldosterone binds, it initiates transcription and synthesizes proteins that will be Na+ reabsorbers. By increasing the #/activity of Na+ reabsorbers in the ascending limb, the renal medulla (plasma of peritubular capillaries) becomes hyperosmotic. As a result, more water is reabsorbed from the DESCENDING limb.
Important to remember that aldosterone does not change the osmolarity of blood, as water follows Na+, osmolarity remains the same.
Aldosterone
Action in increased K+, acidosis, and increased Cl-
Na+ is always reabsorbed in an exchange for other cations such as H+ and K+. As it is important to maintain a balance of charges in the body
1) By reabsorbing Na+, K+ can be excreted in exchange
2) Na+ can be reabsorbed in exchange for the secretion of H+. As a result pH increases
3) Another way to reabsorb Na+ is by reabsorbing it with an anion such as Cl- and HCO3-
Angiotensin II - all abbreviations
AGII, ATII, AGT II
Angiotensin II
Source
Basic Function
Targets
Aldosterone
Thirst
Source: Liver (angiotensinogen, proangiotensin), Plasma (angiotensin I), Lungs (angiotensin II)
Basic function
Major: most potent vasoconstrictor.
Increasing TPR and MAP
Constricting the afferent arteriole decreases GHP, NFP, and GFR. By decreasing GFR (Q), it decreases urine volume and increases blood volume and MAP
Minor: fluid retention by stimulating the release of ADH
Targets: vascular smooth muscle and hypothalamus
Aldosterone: AG II also stimulates the release of aldosterone from the adrenal cortex, increasing the amount of Na+ reabsorbed in the ascending limb. By doing so, (osmotic action) more H2O is reabsorbed from the descending limb, further decreasing urine volume and increasing blood volume, therefore MAP
AG II also causes thirst so that the increased intake of water raises blood volume and BP
How is angiotensin II activated
What is the limiting step
The renin-angiotensin-activating system (RAAS) is a hormone system that regulates blood pressure and water balance.
1) The liver is constantly producing the inactive form, called angiotensinogen or proangiotensin.
2) Renin activates angiotensinogen into angiotensin I in the plasma
3) In the pulmonary capillaries, angiotensin converting enzyme (ACE) converts angiotensin I into angiotensin II
Liver production and ACE enzymes are constant. The limiting step is renin
How is renin released?
Renin is produced by the JG cells in the afferent arteriole in response to three stimuli
1) Reduced stretch of JG cells caused by a drop in MAP
2) Stimulation of JG cells by the macula densa through tubuloglomerular feedback
3) Direct stimulation from the sympathetic nerves
Atrial Natriuretic Hormone - abbreviations
Atrial Natriuretic Hormone/Factor/Peptide
ANH, ANF, ANP
Atrial Natriuretic Hormone
What does the name mean?
Produced
Basic function
Targets
Atrial: atria, Natrium: sodium, Uretic: Pee
Produced by the atria, primarily the right atrium and stimulated to release when due to increase stretch of atria from increased blood volume and/or BP
Basic function: Blocks the reabsorption of Na+ (excrete sodium) , so that more sodium is left in the tubules. Increasing Na+ excretion therefore water excretion through the osmotic action of Na+. By increasing the V of urine, blood volume decreases, therefore a decrease in MAP
Targets: Simple cuboidal epithelium in the ascending limb of LoH, decreasing the #/activity of Na+ reabsorbers.
Atrial natriuretic peptide
How does it work ?
When blood volume is high it increases pressure and stretches the atria, in response they release ANF. ANP targets Na+ reabsorbers in the ascending limb and decreases their #/activity. By doing more Na+ remains in the filtrate and it decreases the osmolarity of the renal medulla. By doing so less water from the descending limb is reabsorbed, increasing the volume of urine, decreasing the V of blood, which decreases MAP. ANH also increases the GHP → NFP →therefore GFR. At the same time it suppresses the release of ADH, aldosterone, and renin.
It can also help reduce BP and edema by causing water excretion
What are four functions of the respiratory system?
1) Gas exchange (respiration)
Bringing O2 in and CO2 out
2) Acid - Base Balance
Maintains CO2 concentration, as CO2 is an acid because it reacts with water and forms carbonic acid.
3) Immunity
Need good immune support, as it is one of the portals of entry
Ciliated pseudostratified columnar epithelium with goblet cells. Mucus traps any debris, bacteria, etc., and through ciliary action, it is removed.
4) Vocalization
How we communicate
Anatomy
Upper respiratory
Lower respiratory
Nasal cavity, mouth, pharynx, and larynx
Trachea, bronchi, bronchioles, and alveoli
Anatomy: Different zones
As we descend?
Conducting zone: Is a set of tubes that warms, filters, and delivers air. Is also a dead space as it does not do anything in terms of respiration
Respiration (gas exchange)
1% bronchioles
99% alveoli
As we descend, we decrease in diameter, but the number increases, greatly increasing SA for gas exchange
What is the alveoli? What is it related to?
The structural and functional units of the lungs
Intimately related to the capillaries
What are the alveoli made up of? (2)
Type I cells
makes up 95% of alveolus
simple squamous epithelium, being thin, allows for gas exchange
Type II cells
Produce surfactant
A detergent (amphipathic molecules) that prevents alveoli from sticking together by breaking the cohesion between H2O molecules
Lubricates and prevents stickiness
Equalizes pressure between the alveoli
*Macrophages
scout alveoli and remove debris
Type II cells and premature babies
Respiratory distress syndrome
Type II cells are one of the last to develop, so when babies are born prematurely Type II cells are not present and the baby cannot breathe on their own because of the lack of surfactant, so they are put on a ventilator
What is the diffusion membrane called? NFP in the lungs?
Alveolar capillary distance (?), is the shortest membrane in the body at 1.5 nanometers. It is so thin because we want gases to diffuse quickly.
Pulmonary capillaries
Have a low LHP and large lymphatic drainage to prevent fluid build up (pulmonary edema)
What law describes gas diffusion? What component would pulmonary edema affect?
Ficks Law states the the net flux is directly proportional to the PPG x SA and inversely proportional to the MR x MT
pulmonary edema affects the MT, decreasing the rate of diffusion.
What are the five phases of respiration
1) ventilation: exchange of gas between ambient air an alveoli
2) external respiration: exchange gas with alveoli and blood
3) transport: move gas through the system from one place to another
4) internal respiration: exchange with blood and tissues
5) cellular respiration: utilization of O2, production of CO2
1) How does ventilation work
Inhalation: By increasing the volume of the thoracic cavity when we inhale the pressure inside the lungs drops and becomes lower than the pressure of the atmosphere, as a result air enters the lungs, from high to low pressure
Exhalation: By decreasing the volume of the thoracic cavity when we exhale, the pressure inside the lungs increases and becomes higher than the pressure of the atmosphere, as a result air leaves the lungs from high to low pressure
2) External respiration
Exchanging gas with alveoli and blood
O2: Alveoli → Blood, oxygen diffuses from its high PO2 in the air to low PO2 in the blood
CO2: Blood → Alveoli, CO2 diffuses from its high PO2 in the blood to low PCO2 in the air
4) Internal respiration
exchange with blood and tissues
O2: Blood → Tissues, O2 moves from its high PO2 in the blood to low PO2 in the tissues
CO2: Tissues → Blood, CO2 moves from its high PCO2 in the tissues to low PCO2 in the blood
5) Cellular respiration
O2: Cells, specifically in the mitochondria, O2 is used as the last electron acceptor at the end of ETC and forms water
CO2: Produced at pyruvate activation and Krebs cycle
What 3 gas laws are we using?
Boyle’s Law
Dalton’s Law
Henry’s Law
Boyle’s Law states?
At a constant temperature P is inversely proportional to the V
P= 1/V
* Body temperature is at a constant temperature (homeostatically regulated variable)
Daltons Law states?
Total pressure in the room is = to the sum of the partial pressures of gases.
P total = Pgas1 + Pgas2 + Pgas3
Pgasx = % gasX + Ptotal
Daltons law is necessary to?
Gas moves due to the partial pressure differences, from high to low, and we need Dalton’s law to calculate the differences.
By using this formula: Pgasx = total pressure x concentration (%) of gasx
We can calculate this as long as we know the total pressure (and PP?)
Evangelista Torricelli
“ We live in an ocean of air, with most of it piled on top of us.”
Percentage and decimals of the PN2, PO2, PCO2
PN2 (79%) → 0.7900
PO2 (20.93%) → 0.2093
PCO2 (0.04%) → 0.0004
The percentage of gas in air does NOT change, but with elevation TOTAL pressure may change
Total pressure at sea level?
760mmHg
What happens when elevation increases?
When elevation increases, the pressure of gases ALWAYS remain the same, but total pressure, therefore partial pressure does decrease.
What happens with PO2 as we increase elevation?
By increases elevation the total P decreases which decreases the PO2 as well, by doing so the PPG in the lung decreases and diffusion will be slower
What is the minimum partial pressure of oxygen required for survival?
PO2 of 50 mmHg is needed for survival
Henry’s Law states? What additional law applies?
States that the partial pressure of a liquid will equilibrate to the partial pressure of the gas that surrounds it.
Because gas is diffusing, Fick’s Law applies.
What does Henry’s Law implicate?
Blood is a liquid, so the blood will equilibrate to the surrounding gas. Thus, blood leaving the lungs will have the same PO2 and PCO2 as the alveoli because of Henry’s Law.
How is partial pressure different to concentration?
Partial pressure is not concentration because concentration highly depends on solubility.
For example the PP of O2 and CO2 can be the same at 100 mmHg, however the concentration in the liquid is different because CO2 is 20x more soluble than O2 due to the bond

What would be the partial pressure of O2 at sea level (760mmHg)
1) From the initial PO2, why does it drop?
2) What would be the state of the blood entering the arteriole end of the pulmonary capillary?
What does the membrane allow for?
3) O2 continues to diffuse until when? What law states this?
PO2 = 0.2093×760= 159mmHg
1) From the incoming PO2 of 159 mmHg it drops to 105mmHg in the alveoli because it mixes with unexpelled air, as a result the PO2 gets diluted.
2) Incoming blood is coming back from the tissues and will be deoxygenated, as result PO2 will be at 40mmHg. Because the membrane between the pulmonary capillary and alveoli is so thin this allows for the quick diffusion of gas, and since gas moves due to the partial pressure difference, the greater the partial pressure gradient, the faster the diffusion
3) From PA O2 = 105 mmHg to Pa O2 40mmHg is a great gradient and as a result O2 diffuses into the blood and continues to do so until the PO2 of blood equilibrates to that of its surroundings (alveoli), and as a result the PO2 in the blood also becomes 105mmHg, due to Henry’s Law

What would be the partial pressure of CO2 at sea level (760mmHg)
1) From the initial PCO2, why does it increase?
2) What would be the state of the blood entering the arteriole end of the pulmonary capillary?
3) CO2 continues to diffuse until when? What law states this?
PCO2 = 0.0004 × 760mmHg = 0.3 mmHg
1) From the incoming PCO2 of 0.3 mmHg, it gets mixed with air already in the lungs, but because the air in the lungs has a lot of CO2, as we are constantly making CO2, the PCO2 increases to 40 mmHg
2) Blood that is entering from the arterial end of the capillary comes from the tissue, and as the tissue is constantly producing CO2, the PCO2 is higher at 45mmHg
3) PCO2 diffuses from high in the capillaries to low PCO2 in the alveoli and continues to do so until the PCO2 equilibrates to that of its surroundings (alveoli). As a result, the blood that leaves the pulmonary capillary at the venule end will have a PCO2 of 40mmHg, the same as the alveoli due to Henry’s Law

O2
What does being at sea level tell us?
What does being at rest tell us?
1) Why does the room air decrease?
2) What happens with the blood that enters and then exits?
3) Blood that exits and enters the arterial tree, why does it drop?
4) What happens between blood in the systemic capillaries and tissues?
5) The blood exits the tissue as? enters the venous tree as?
Tell us the PO2 will be 159mmHg
Being at rest tells us what is happening in tissues
1) From the initial PO2 of 159mmHg it mixes with unexpelled gas and drops to 105mmHg (rest)
2) Blood that is entering the pulmonary capillaries at the arteriole end has a low PO2 at 40 mmHg. Here, there is gas exchange, so gas moves from the high PO2 of 105mmHg in the alveoli to the low PO2 of 40 mmHg in the blood. O2 continues to diffuse from the alveoli into the blood until the PO2 of the blood equilibrates to its surroundings (alveoli) at 105mmHg, because of Henry’s law.
3) Blood that exits the capillary and enters the arterial tree has a PO2 of 105mmHg. In the arterial tree, PO2 drops from 105mmHg to 100mmHg because of venous admixture from metarterioles.
4) PO2 is 100mmHg when it enters the systemic capillaries. At rest, cells are still going through cellular respiration and are using O2 as the final electron acceptor and converting it into H2O; because of this, PO2 in the tissues is 40mmHg. Because of the difference, we have a gradient and gas diffusion, from the PO2 of 100mmHg in the blood, O2 diffuses to a low PO2 of 40 mmHg and continues to diffuse until the PO2 in the blood equilibrates to its surroundings (tissue) to 40mmHg.
5) As a result, the blood that exits the systemic capillary and enters the venous tree has a PO2 of 40mmHg.

What is venous admixture?
Through metarterioles, deoxygenated blood from the venous tree bypasses the capillaries and directly connects to arterial tree, causing deoxygenated blood to mix with oxygenated blood.

1) PCO2 increases because
2) What happens to the blood that enters the pulmonary capillary? Exits?
3) Do we count venous admixture here?
4) Blood that enters is? What happens in the tissue? What is the PCO2 of blood once it leaves?
5) Blood enters pulmonary capillaries as?

In exercise what PP increases? Decreases?
What does NOT change? Why not?
What side will be affected because of this?
In tissues the PO2 decreases and the PCO2 increases
The partial pressure of gas in room air does NOT change because we increase ventilation (hyperpnea) to make up for the increase of PCO2
Because the conditions of the tissue are changing it changes the VENOUS tree

Sea level, exercise PO2
1) What remains the same?
2) What is changing? Why? What does this do to the gradient?
3) What happens to blood PO2? How does it exit the tissue and enter venous tree?
4) What happens with blood at the pulmonary capillary?


Sea level, exercise PCO2
1) What remains the same?
2) What is changing? Why?
3) Blood from systemic capillary to tissues: changes in gradient?
4) What is the PCO2 of blood as it exits systemic capillary?
5) What happens with PCO2 between the pulmonary capillary and alveoli? gradient?

Eupnea
Normal breathing; breathing matches amount of CO2 produced
Hyperpnea
Increase in ventilation to meet metabolic demand (increase in CO2 production)
Hyperventilation
also known as?
Excessive breathing, decrease is PCO2
Tachypnea and Polypnea
What is desaturation?
Arterial PO2 is much greater than the PO2 of the veins, because of this diffusion becomes a limiting factor because gradients are too big, not allowing for complete equilibrium.
Ex PO2 vein = 1mmHg and PO2 in artery is 105mmHg, because this difference is so huge it will not have enough time to get to 105mmHg
Changing altitudes
Does % of gas change? What changes?
What side do we expect to be affected?
Because we are still at rest do we expect a change in tissues?
Changing altitudes does NOT change the % of gas. What does change is the total pressure and partial pressure, because of this we expect numbers in the ARTERIAL tree to be lower. But because we are still at rest PO2 in the tissue remains at its normal PO2 of 40mmHg. Because the tissues are using O2 at the same rate CO2 is produced at the same rate as well and PCO2 is 45mmHg