experiment 5

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/33

encourage image

There's no tags or description

Looks like no tags are added yet.

34 Terms

1
New cards
What was the overall purpose of Experiment 5?
The purpose was to convert maleic acid, a cis alkene, into fumaric acid, its trans isomer, using hydrochloric acid as a catalyst. We then isolated the fumaric acid through crystallization and filtration and evaluated the product using its mass and melting point.
2
New cards
Why is fumaric acid more stable than maleic acid?
Fumaric acid is the trans isomer, meaning its carboxylic acid groups are positioned on opposite sides of the double bond. This reduces steric repulsion between the groups compared with maleic acid, where the groups are on the same side.
3
New cards
Why can't maleic acid simply rotate into fumaric acid?
The carbon-carbon double bond contains a pi bond that prevents free rotation. For maleic acid to change into fumaric acid, the pi bond must temporarily be broken so that the carbon-carbon bond can rotate before the double bond reforms.
4
New cards
Why was hydrochloric acid used in Experiment 5?
Hydrochloric acid provided an acidic environment that allowed the double bond to be temporarily disrupted through protonation. This made rotation possible, allowing the less stable cis arrangement to convert into the more stable trans arrangement.
5
New cards
Why was maleic acid dissolved in water before adding hydrochloric acid?
Water acted as the reaction solvent and allowed maleic acid to dissolve so that its molecules could interact with the acid catalyst. This helped the reaction occur throughout the mixture rather than only where solid and liquid touched.
6
New cards
Why was reflux used during Experiment 5?
The isomerization required heating to proceed efficiently. Reflux allowed the reaction mixture to remain near its boiling temperature while condensed solvent returned to the flask, preventing excessive solvent loss.
7
New cards
What is reflux, and how does it work?
Reflux is a technique in which a liquid reaction mixture is heated until it boils, and the vapor rises into a condenser. The condenser removes heat from the vapor, turning it back into liquid that flows into the original flask.
8
New cards
Why was a condenser necessary during reflux?
The condenser prevented the continuous loss of solvent by cooling vapor and returning it to the reaction flask. Without it, the solvent could evaporate away, changing the reaction mixture's volume and concentration.
9
New cards
Why does cooling water enter the bottom of the condenser and leave through the top?
Water entering from the bottom pushes air upward and helps keep the condenser's cooling jacket completely filled. This provides effective cooling so rising vapor can condense and return to the reaction flask.
10
New cards
What is the approximate temperature of a refluxing reaction? [Prelab]
A refluxing mixture remains approximately at the boiling temperature of its solvent or reaction mixture under the operating pressure. For Experiment 5, the aqueous reaction mixture boiled near the boiling point of water.
11
New cards
Why should a reflux flask generally be no more than half full? [Prelab]
The flask needs sufficient empty space for vapor formation and bubbling as the liquid boils. Overfilling increases the risk of liquid splashing into the condenser, bumping, or overflowing during heating.
12
New cards
Where should a round-bottom flask be clamped during reflux? [Prelab]
The flask should be secured at its neck because this provides stable support without applying unnecessary pressure to its rounded body. Proper clamping helps prevent tipping, spills, and broken glassware.
13
New cards
Why were boiling stones added before heating? [Prelab]
Boiling stones provide nucleation sites where vapor bubbles can form steadily. This promotes smooth boiling and helps prevent sudden, violent boiling called bumping.
14
New cards
Why was a heating mantle used instead of directly heating the flask with a flame?
A heating mantle provides controlled heat around the round-bottom flask without exposing the reaction mixture to an open flame. This makes heating more uniform and safer for an organic laboratory setup.
15
New cards
Why was the heating mantle connected to a voltage transformer?
The transformer allowed the amount of electrical power supplied to the heating mantle to be controlled. This helped regulate the heating rate and maintain appropriate reflux conditions.
16
New cards
Why did fumaric acid crystals begin forming during the reaction?
Fumaric acid is much less soluble than maleic acid in the aqueous hydrochloric acid mixture. As fumaric acid formed, the solution could no longer keep all of it dissolved, causing some product to precipitate as crystals.
17
New cards
Why did we cool the reaction mixture after reflux?
Cooling reduced the temperature of the reaction mixture, making the apparatus safer to handle. It also decreased fumaric acid's solubility, allowing additional solid product to separate from the liquid.
18
New cards
Why was the reaction flask placed in an ice-water bath after reflux?
The ice-water bath lowered the solution temperature further, decreasing fumaric acid's solubility. This encouraged more product to crystallize, improving the amount that could be recovered through filtration.
19
New cards
Why does lowering temperature often cause crystallization?
Many solid compounds become less soluble as temperature decreases. When a solution cools and can no longer hold the same amount of dissolved compound, the excess material separates from the solution as crystals.
20
New cards
Why was vacuum filtration used after crystallization?
Vacuum filtration separated the solid fumaric acid crystals from the liquid reaction mixture. Suction pulled liquid through the filter paper while the solid product remained in the Büchner funnel.
21
New cards
What was the purpose of the Büchner funnel?
The Büchner funnel supported filter paper that trapped solid fumaric acid crystals while allowing liquid to pass through. Its perforated base enabled efficient separation when connected to a vacuum source.
22
New cards
What was the purpose of the vacuum flask?
The vacuum flask collected liquid passing through the Büchner funnel and connected to the suction source through its sidearm. Its thick walls were designed to withstand reduced pressure during filtration.
23
New cards
Why was the vacuum flask clamped during filtration?
The flask could become unstable because of the attached vacuum tubing and filtration apparatus. Clamping prevented it from tipping over, spilling chemicals, or breaking.
24
New cards
Why was the filter paper wetted before vacuum filtration?
Wetting the filter paper helped it adhere to the bottom of the Büchner funnel and form a seal. This prevented solid particles from passing around the edges instead of remaining on the filter paper.
25
New cards
Why were the fumaric acid crystals washed with cold water?
Cold water helped remove soluble impurities and residual acid from the crystals while minimizing dissolution of the desired fumaric acid. Warmer water could dissolve more product and reduce the recovered yield.
26
New cards
Why was the fumaric acid allowed to dry before weighing?
Water remaining on the crystals would increase the measured mass and make the calculated yield artificially high. Drying ensured that the mass more accurately represented the actual solid product.
27
New cards
Why was the melting point measured after the reaction?
The melting point helped confirm that fumaric acid had formed and provided information about product purity. Fumaric acid has a much higher melting point than maleic acid, allowing the two isomers to be distinguished.
28
New cards
Which isomer has the lower melting point, and why? [Lab report]
Maleic acid has the lower melting point because its cis arrangement gives it different hydrogen-bonding and crystal-packing behavior. Fumaric acid forms a stronger intermolecular hydrogen-bonding network in its crystal, producing a much higher melting point.
29
New cards
Why would fumaric acid not melt at 150°C?
Pure fumaric acid has a literature melting range near 299–300°C, which is far above 150°C. Therefore, a fumaric acid sample should remain solid at that temperature under the experiment's conditions.
30
New cards
How do you calculate moles of maleic acid?
Divide the starting mass of maleic acid in grams by its molar mass of 116.07 g/mol. This determines how many moles of starting material were available for conversion into fumaric acid.
31
New cards
How do you calculate theoretical yield of fumaric acid? [Lab report]
Convert the starting mass of maleic acid into moles, use the 1:1 mole ratio to determine the maximum moles of fumaric acid, and multiply by 116.07 g/mol. Because both isomers have the same molar mass, their theoretical masses are equal.
32
New cards
How do you calculate actual fumaric acid mass?
Subtract the combined mass of the filter paper and weigh boat from the final mass containing the filter paper, weigh boat, and dried fumaric acid. The difference represents the recovered solid product.
33
New cards
How do you calculate percent yield of fumaric acid? [Lab report]
Divide the actual mass of dry fumaric acid recovered by its theoretical mass, then multiply by 100. This indicates what percentage of the maximum possible product was successfully obtained.
34
New cards
What factors could cause a lower-than-expected fumaric acid yield? [Lab report]
Some fumaric acid may remain dissolved in the reaction mixture, some may dissolve during washing, and some starting material may not fully convert. These factors can reduce recovery even when the procedure is performed correctly.