1/40
Looks like no tags are added yet.
Work
The product of the force exerted on an object and the distance through which that force moves.
Work at an Angle formula
W=Fdcos(θ)
Power formula
(Power=tW=tFd).
Watt
The standard metric unit of power, defined as 1joule per second. One kilowatt (1kW) equals 1000watts.
Horsepower formula
HP=k×tF×d.
Energy
The ability to do work. An object is said to possess energy if it has the capacity to perform work, and it can be transferred between objects or transformed between different forms.
Potential Energy
A primary form of mechanical energy consisting of stored energy or energy an object possesses while at rest.
Kinetic Energy
A primary form of mechanical energy consisting of the energy possessed by an object due to its motion.
Law of Conservation of Energy
The fundamental physical law stating that energy can neither be created nor destroyed; it can only be transferred or converted from one form to another.
Torque (Moment)
A measure of the force that can cause an object to rotate or twist around an axis, applied perpendicular to a pivot point at a specified distance
Direction of Torque
Torque causing clockwise (CW) rotation is considered negative, and torque causing counter-clockwise (CCW) rotation is considered positive.
Engine Torque formula
Tengine=RPMHP×5252.113.
Equilibrium
The balanced state of an object where both the sum of all external forces and the sum of all torques equal zero (∑F=0 and ∑T=0), resulting in no net force and no net torque.
Center of Gravity (CG)
The point where the entire mass and weight of an object appear to be concentrated and balanced in equilibrium, calculated as CG=total weighttotal moment.
Reference Datum
An imaginary vertical plane chosen by the manufacturer from which all horizontal distances are measured for aircraft weight and balance calculations.
Arm
The horizontal distance measured in inches from the reference datum line to the center of gravity of an item on an aircraft.
Moment (Weight and Balance)
The rotational force or torque produced about the reference datum, calculated by multiplying an item's weight by its arm and expressed in inch-pounds.
Ballast
Extra weight strategically added to an aircraft or structure to restore balance and bring the center of gravity within acceptable operating limits.
Tare Weight
The weight of chocks and other support equipment placed on the scale plates during weighing, which must be subtracted to establish the accurate weight of an aircraft.
Simple Machine
Any mechanical device with which work may be done that makes work easier by changing the magnitude of the applied effort, changing its direction, or both.
Complex Machine
A machine produced by combining two or more simple machines together to accomplish work.
Mechanical Advantage (MA)
The factor by which a machine multiplies the applied effort, determined by the ratio of the output resistance force to the input effort force (MA=ER).
Mechanical Efficiency
The ratio of actual mechanical advantage to ideal theoretical advantage expressed as a percentage (%Efficiency=IdealActual×100), which is always less than 100% due to energy lost to friction.
First-Class Lever
A type of lever in which the fulcrum is located between the applied effort force and the resistance load, primarily used to multiply force (e.g., seesaw, crowbar, pliers).
Second-Class Lever
A type of lever in which the resistance load is situated between the fulcrum and the applied effort force, multiplying the input force (e.g., wheelbarrow, nutcracker, bottle opener).
Third-Class Lever
A type of lever in which the effort force is applied between the fulcrum and the resistance load, used mainly to gain speed rather than force (e.g., human bicep flexing the forearm).
Fixed Pulley
A pulley with a stationary wheel that alters the direction of the applied effort without multiplying force, having a mechanical advantage of MA=1.
Moveable Pulley
A pulley whose wheel moves along with the load and effort, dividing the load weight equally between supporting rope segments to produce a mechanical advantage of MA=2.
Block and Tackle
A combination pulley system comprising both fixed and moveable pulleys whose mechanical advantage equals the number of rope segments directly supporting the load.
Differential Pulley (Chain Hoist)
A heavy-lifting pulley mechanism operated by pulling slack chain loops across two connected pulleys of different diameters, possessing a mechanical advantage of MA=R−r2R.
Wheel and Axle
A simple machine consisting of a large wheel or crank rigidly fastened to a smaller concentric axle, yielding a mechanical advantage equal to MA=RaxleRwheel.
Inclined Plane
A flat surface set at an angle to the horizontal (ramp) that allows lifting a heavy load by applying a smaller force over a longer distance, where MA=height of inclinelength of incline.
Pitch (Screw)
The linear vertical distance between two successive threads on a bolt or screw, equal to the forward axial distance advanced in one complete rotation.
Spur Gears
Toothed wheels with straight cut teeth used to transmit rotary motion between parallel shafts, where the smaller of the meshing gears is known as the pinion.
Helical Spur Gears
Gears designed with teeth cut slantwise across the face, maintaining continuous engagement between teeth to operate more smoothly and quietly than standard spur gears.
Bevel Gear
A gear with angled, beveled teeth configured to connect shafts that intersect at varying angles.
Work and Torque formula
(W=F×d)
What does Work require?
It requires motion in the direction of the applied force; without movement, no work is done.
Work at an angle (definition)
When force is applied at an angle to the direction of motion, meaning only a horizontal component of the force contributes to the actual work output.
Power (definition)
The rate at which work is done over time, calculated by dividing work by time
Horsepower (definition)
A unit of power defined as the capacity to perform 33,000foot-pounds per minute or 550foot-pounds per second.