1/26
Atomic Structure
Metal - properties
Good electrical and thermal conductivity, High strength and formability
Metal - examples
Aluminum, magnesium, zinc, iron, titanium, copper, nickel, steel
Ceramics and glasses - properties
Poor electrical and thermal, conductivity, Resistant to high temp, Strong but brittle
Ceramics and glasses - examples
Rocks, silica
Polymers - properties
Poor electrical and thermal conductivity, Lower strength but high, strength-to-weight ratio, Unstable at high temp.
Polymers - examples
Polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), nylon, teflon
Composites - properties
Enhanced compared to individual materials, e.g. light and stiff, Electrical conductivity between ceramics & metals
Composites - examples
Fiberglass, carbon fiber-reinforced plastic, Si, Ge, GaAs
Crystalline
Regular repeating patterns
Polycrystalline
many crystals formed together
Amorphous
no long term order
Young’s Modulus
Describes the stiffness of a material (high = very stiff, low = flexible), this is because young’s modulus is based off of Hooke’s law (linear), it tells you how much strain (deformation) you will get for how much stress (force) you apply and is linear.
Macro-scale
up to 1 meter; power generated, efficiency, durability, cost
Microstructure - polycrystalline
1-10mm, grains; high cycle failure, ductility
Microstructure
50-500 micrometers; yield strength, ultimate tensile strength, high/low cycle fatigue, thermal growth, ductility
Atomic structure
1-100 angstroms; young’s modulus, thermal growth
Allotropes
different forms of the same of the same elements with different structure
Primary bonds
ionic, covalent, and metallic (transfer or share electrons)
Secondary bonds
Van der Waal’s (dipole-dipole): London dispersion forces (temporary induced dipole), keesom bonds (permanent dipole), debye bonds (permanent-induced dipole)
Why do elements bond?
to have a lower potential energy
Metallic bonds - description
valence electrons are shared (sea of electrons), non-directional, atoms are packed densely, positively charged atoms are held together by mutual attraction to electrons,
Ionic bonds
electrons are transferred, strong, creates a cation (+) and an anion (-) that are attracted to each other, usually between two elements with a large difference in electronegativity
Covalent bonds
electrons are shared, directional, electrons in these bonds repel each other, stronger than metallic
examples: Si computer chip (impurities turn it into a semi-conductor), SiO2 (silica) glass, the C-C bonds in polymer chains (their ‘backbone’)
Van der Waal’s forces
weak, due to change
Metallic bonds - properties
Since electrons not bound to any particular atom, they are free to move around, this makes them good at electrical and thermal conductivity. but only at low temperatures,
good ductility because they are non- directional (nearly isotropic properties - similar properties in different directions),
bonding is weaker so corrosion is more prevelant than ionic and covalent bonds
Covalent bond - properties
directionality (e.g. silicon is a tetrahedron with a 109.5 degree angle between bonds), hard bonds result in hard materials and high melting temperatures, valence electrons trapped in bonds cause low electrical conductivity
Ionic bonds - properties
hard, brittle, high melting temperature, poor conductors of electricity as solids because the ions are locked in place, but as liquids or gases they can conduct just fine