ASVAB prep - Auto and Shop Information - Woodworking

Which type of bolt has a square section that grips into the part being fixed (typically wood) to prevent the bolt from turning when the nut is tightened?

Carriage bolt.

On a woodworking plane, the "frog" refers to the _________.

The sliding iron wedge that holds the plane iron at the proper angle.

To make a wide groove in a board with a table saw, what type of blade would you use?

Dado.

Drill bits can be loosened and tightened using a _________.

Chuck key.

A rubber mallet would be BEST used to _________.

Remove fragile parts.

A miter box is helpful in making _________.

Crosscuts at specific angles.

In the typical workshop, a plane is used for what purpose?

Removing thin strips of wood.

What type of joint is shown in the figure?

Dovetail joint.

Which of the following is TRUE of a powered miter saw?

The blade is circular.

Your woodwork has a slightly uneven plane. Which tool should you use to correct the problem?

A plane.

Which would be the last woodworking plane that you would use to prepare a rough sawn board for finishing?

Smoothing plane.

Making large (wider than 1/2") holes in wood is called _________.

Boring.

In order to level a surface across a plane, one might use a _________.

Bullseye spirit level.

Which type of saw is designed to make accurate crosscuts at specific angles?

Miter saw.

A coping saw is used to make _________.

Intricate, curving cuts.

Which of the following woodworking objects would MOST likely be created with a lathe?

A table leg.

The BEST way to sand the end grain of wood is _________.

Crosswise.

What type of clamp is this?

Parallel clamp.

A rasp is used to _________.

Coarsely shape wood or other material.

Which type of saw is BEST used for cutting small, often awkward features in building materials such as drywall?

Keyhole saw.

Why is it important to use a push stick when operating a table saw in woodworking?

To keep fingers away from the blade and prevent hand injuries.

What is the purpose of a carving knife in woodworking?

Precise cutting and shaping of wood.

When should a woodworker use a wood chisel?

Carving, shaping, or smoothing wood.

What is the purpose of a dovetail joint in woodworking?

To create a strong and durable connection between two pieces of wood.

What type of joinery technique is commonly used to join two pieces of wood at a 90-degree angle?

Butt joint.

What safety measure should be taken when using a router in woodworking?

Wearing hearing protection.

Why is it important to wear safety goggles when using power tools in woodworking?

To protect the eyes from potential injuries caused by flying debris.

Why is it important to have a fire extinguisher in a woodworking shop?

Quickly contain and extinguish fires.

What is the purpose of applying wood glue when joining two pieces of wood together?

Creating a strong and permanent bond.

What type of saw is best suited for making long, straight cuts in wood?

Table saw.

What is the standard unit of measurement for lumber in the United States?

Foot.

Which woodworking joint involves cutting a recess in one piece of wood to receive the end of another?

Mortise and tenon joint.

Which woodworking joint involves cutting a groove in one piece of wood to receive the edge of another?

Dado joint.

Which of the following is the most important safety practice when using a router table?

Using a featherboard.

Which of the following is the most important safety practice when working with wood finishes?

Applying finish in a well-ventilated area.

What should be used to secure a workpiece when operating power tools in a workshop?

Clamps.

Which woodworking tool is primarily used for shaping curved edges and creating decorative profiles?

Router.

Which woodworking tool is primarily used for cutting precise, intricate shapes in wood?

Jigsaw.

Which woodworking tool is primarily used for drilling holes in wood?

Drill press.

Which of the following is a type of hardwood commonly used in furniture making?

Oak.

What should be used to lubricate hand tools in woodworking to prevent rust?

Machine oil or silicone lubricant.

Which of the following is a common woodworking hand tool used for measuring and marking cutting lines on wood?

Combination square.

Which of the following is a common woodworking hand tool used for smoothing and shaping edges of wood?

Plane.

What is the most common type of saw used for making straight cuts in woodworking?

Table saw.

Which of the following is a common woodworking hand tool used for driving nails into wood?

Hammer.

Which of the following is a common woodworking power tool used for sanding large, flat surfaces?

Belt sander.

Which of the following is a common woodworking power tool used for cutting curves and intricate shapes in wood?

Bandsaw.

What safety precaution should be taken when using a power drill in woodworking?

Wear safety goggles.

What safety equipment should be worn when operating woodworking machinery?

Safety goggles, ear protection, and a dust mask.

Which of the following is a softwood commonly used in construction and woodworking projects?

Pine.