1/26
Comprehensive practice flashcards covering electromagnetism, magnetic fields, electric circuits, Ohm's Law, ion formation, chemical equations, and the conservation of mass.
What are magnets, and how do they exert forces on magnetic materials?
Magnets are objects that attract metals such as iron or steel. They exert magnetic forces, which are non-contact forces that affect objects even when they are not touching.

In a magnetic field diagram, what information is conveyed by the direction of the arrows and the spacing between the lines?
The arrows show the direction of the magnetic field, always pointing from the north pole to the south pole. The spacing between the lines indicates strength: the further apart the lines are, the weaker the magnetic force.
What rule governs the attraction and repulsion between magnetic poles?
Opposite poles attract (a north pole attracts a south pole), whereas like poles repel (north repels north, and south repels south).
What two factors determine the strength of magnetic forces?
The distance between the magnets (the closer they are, the stronger the force) and the magnets themselves (ranging from weak fridge magnets to very strong magnets used to levitate high-speed trains).

What rule is illustrated here, and what do the thumb and fingers represent?
The 'right-hand grip rule'. The thumb points in the direction of conventional electric current flow along the wire, while the curled fingers show the direction of the resulting circular magnetic field.

What is a solenoid, and in what two ways can its magnetic field be made stronger?
A solenoid is a single, current-carrying wire looped into coils to form a stronger electromagnet. Its magnetic field can be strengthened by placing an iron core inside the solenoid or by increasing the current flowing through the wire.
What is the primary operational advantage of an electromagnet over a permanent magnet?
Electromagnets can be turned on and off by switching the electric current on and off.
What is electricity, and what causes electric charge to flow?
Electricity is a form of energy that occurs due to charged particles. When negatively charged electrons are dislodged from atoms, objects gain a positive or negative overall charge; oppositely charged particles attract and attempt to reunite, creating the flow of electricity.
What four components are required to form a closed electric circuit?
A power source or cell (battery), a conducting pathway (wires), a load (a device that converts electrical energy into other forms), and a switch (to open and close the circuit).
How does electron flow differ from conventional current?
Electron flow is the physical movement of negatively charged electrons from the negative terminal toward the positive terminal of a battery. Conventional current describes electricity as flowing from the positive terminal to the negative terminal.

Which common circuit diagram symbols are illustrated in this reference chart?
The symbols represent a light globe, a switch, a connecting wire, a voltmeter, an electric motor, a battery, an ammeter, a resistor, and an electric bell.
How do current and voltage behave across components in a series circuit?
Each load receives the exact same amount of current (the circuit's total current), while the total voltage is split across the individual loads.
In a series circuit powered by a 6V cell carrying a total current of 2A, what current and voltage does each of two identical globes receive?
Each globe receives the total current of 2A and half of the total voltage, which is 3V (if a third identical globe were added, the voltage would split three ways to 2V each).
How do current and voltage behave across branches in a parallel circuit?
The total current splits between the pathways/loads, while each load receives the full amount of voltage (the total voltage of the circuit).
In a parallel circuit powered by a 12V cell with a total current of 3A split across two identical pathways with globes, what does each globe receive?
Each globe receives 1.5A of current (splitting the 3A across two pathways) and the full total voltage of 12V.
What is voltage, and how must a voltmeter be connected in a circuit?
Voltage (potential difference) is the difference in potential energy carried by electrons between two parts of a circuit. It is measured in volts (V) using a voltmeter connected in parallel across the two points.
What is electric current, what is its unit of measurement, and how is an ammeter connected?
Current is the amount of charge (number of electrons) passing a point in a circuit in one second. It is measured in amperes/amps (A) using an ammeter connected in series.
What is electrical resistance, and how do conductors differ from insulators?
Resistance is a measure of how difficult it is for electric current to move through a component, measured in Ohms (Ω). Conductors (e.g., copper, gold, aluminium) have low resistance, while insulators (e.g., plastic, glass, wood) have high resistance.

What electrical hazard is shown in this diagram, and why does it occur?
A short-circuit. Electric charge takes the path of least resistance through a conducting pathway that lacks a load, bypassing the light bulb completely. This produces large currents that can quickly drain batteries, heat wires, and cause damage or fire.
What is Ohm's Law, and what is the current in a circuit if V=120V and R=40Ω?
Ohm's Law states V=I×R. Rearranging for current gives I=RV=40Ω120V=3A.
Why do atoms form ions, and what two processes allow them to achieve a full outer shell?
Atoms form ions to gain stability by obtaining a full outer shell of valence electrons. They do this either by taking electrons from other atoms or by losing valence electrons to expose the full shell underneath.
What is the difference between a cation and an anion?
A cation is an ion with an overall positive charge (having fewer electrons than protons), while an anion is an ion with an overall negative charge (having more electrons than protons).
How do neutral oxygen and neutral lithium form stable ions?
Neutral oxygen has 6 valence electrons and gains 2 electrons to form an oxide anion (O2−). Neutral lithium has 1 valence electron and loses that 1 electron to form a lithium cation (Li+).

What three steps are used to determine the chemical formula of sodium oxide as shown here?
Step 1: Identify the ions from the valency table (Na+ and O2−). Step 2: Balance the overall charge by adding ions (2×Na+=2+ balances 1×O2−=2−). Step 3: Write the formula with symbols and subscripts without charges (Na2O).
State the Law of Conservation of Mass and demonstrate it using the reaction of carbon with oxygen.
Mass is never created or destroyed in a chemical reaction; reactant atoms are merely rearranged into products. For example, when 12g of carbon burns completely in 32g of oxygen, it produces exactly 44g of carbon dioxide (12g+32g=44g).

Why does measured mass change in an open system compared to a closed system during evaporation or gas reactions?
In an open system, gas particles escape into the surrounding air so measured mass decreases (or increases if atmospheric gas is bound). In a closed system, matter cannot enter or leave, so the total mass remains strictly constant while gas pressure increases.
Why must chemical equations be balanced, and what is the balanced form of CH4+O2→CO2+H2O?
They must be balanced because atoms cannot be created or destroyed, requiring identical numbers of each type of atom on both sides. Using coefficients gives the balanced equation: CH4+2O2→CO2+2H2O.