1/38
Looks like no tags are added yet.
What are polysulfide's main advantages?
Good dimentional accuracy, greater strength, and has tear resistance
What are polysulfide's disadvantages?
Rotten-egg smell, messy (can stain clothes), hard to clean up
What are silicone's main advantages?
Easy to mix, pleasant taste, odorless, and flexible. Alternative to polysulfide
What are important mixing guidelines for silicone?
- Use special tray adhesive
- No syneresis or imbibition occurs
What is Polyvinyl Siloxane also called?
Addition silicone or Polysiloxane
USED IN LAB
What is Polyvinyl Siloxane's main advantage?
Excellent/SUPERIOR accuracy and dimensional stability.
What are Polyvinyl Siloxane's disadvantages/requirements?
Expensive, hydrophobic (needs dry conditions), and latex can interfere with setting.
What are important mixing guidelines for Polyvinyl Siloxane?
Use automixer/mixing tips
Models can be delayed up to 7-10 days
What are polyether's main advantages?
Accurate, detailed impressions, low shrinkage, and hydrophilic**
What are polyether's disadvantages?
Very stiff and not flexible, hard to remove from mouth
What are important mixing/removal guidelines for polyether?
Excellent impression accuracy & dimensional stability are necessary
What is a Reversible Hydrocolloid?
Able to change from the gel to sol and back to the gel stage with minimal dimensional change
What are the components of Agar Hydrocolloid?
Agar (13%) derived from seaweed
Water (85%)** most principle component

Describe the armamentarium of agar hydrocolloid impression material (reversible hydrocolloid)
Conditioning bath
Define Elastomeric
Having elastic or rubber like qualities
Makes it possible to remove the impression after it has set without distortion or tearing
Self-curing —> base and catalyst
What are the 3 forms of elastomeric materials?
Light body
Heavy body
Regular body / putty material
What are the 2 different packaging systems for elastomeric materials?
Base (paste as a cartridge or putty form)
Catalyst (paste as a cartridge, liquid, or putty form)

Describe Light Body elastomeric material
(aka syringe type or “wash material”)
Low-viscosity (thin, easy flow) material applied directly around the prepared tooth with a syringe to capture fine surface details

Describe Regular/Heavy Body elastomeric material
(aka tray material)
Thick, stiff material used to fill the tray
Presses light-bodied material tightly against the prepared tooth for accuracy
What is the curing reaction (polymerization)?
The change from a paste into a rubber-like material
What are the 3 stages of the curing reaction?
Initial set
Final set
Final cure
Define the Initial Setting Time
Paste stiffens but there is no appearance of the elastic properties
Material may only be manipulated during this time
Define the Final Setting Time
Appearance of elasticity begins and continues to a solid rubbery mass is reached
The material must be placed in the mouth before the final set is reached
Define the Final CuringTime
The last stage of final cure occurs anywhere from 1-24 hours
Only slight dimensional change is noted in the detail of the impression during this time
What are the advantages of elastomeric impression materials over agar and alginate?
No shrinkage due to water content
More accuracy
List the four types of elastomeric impression materials
Polysulfide
Silicone
Polyvinylsiloxane
Polyether
What are Custom Trays?
An acrylic tray customized for an individual patient arch
What are the uses of Custom Trays?
Taking final impressions** for fixed prosthodontic and denture fabrication.
crown and bridge
inlays / onlays
implants
veneers
partial / complete dentures
List the advantages of using a custom tray
Improved accuracy
Better fit
Uniform thickness between tissues and tray walls
Eliminates potential for voids by using stops
Less impression material is required
List the disadvantages of using a custom tray
Material is expensive
What are Light Cured Resin custom trays?
Material is hardened in a light curing unit
USED IN LAB
What are Thermoplastic custom trays?
Plastic beads softened in warm water then shaped and cooled
List the steps involved in the construction of a light cured acrylic custom tray.
Preparing the model
Adapting the spacer
Adapting the material to the spacer
Removing tray from the model
Finishing the tray

Discuss the purpose of the wax spacer in an acrylic custom tray
To create uniform space between the client’s tissues and the tray, as well as for the flow of acrylic resin

Discuss the purpose of stops in an acrylic custom tray
Prevent the tray from being seated too deeply and squishing all the material out of the tray
How many minimum stops are required for edentulous (toothless) trays?
A minimum of 4 stops
Describe the typical appointment sequencing when a custom tray is required
First appointment:
take alginate impressions for stone models
take bite registration
pour stone models
trim stone models
fabricate wax spacer and custom tray
Second appointment:
prepare teeth or tooth for restoration
apply adhesive to custom tray
take final impression and take final bite registration
provide client with temporary restoration
send final impression to lab to fabricate restoration or prosthetic device
Identify a variety of uses for the intra-oral digital scanner (digital impressions)
restorative dentistry (crowns bridges, dentures)
orthodontics (aligners, retainers)
diagnosing and preventive dentistry
Discuss benefits of using intra-oral digital scanner technology (digital impressions)
quick
comfortable for client
reduce cross contamination risks
less clinical waste