1/47
Vocabulary flashcards covering industrial fluid handling, turbomachinery, heat transfer equipment, and material handling systems from lecture notes and practice exam questions.
Screw Pump
A positive displacement pump type commonly used for pumping viscous fluids such as oil.
Net Positive Suction Head (NPSH)
The parameter representing the hydraulic energy required at the pump suction to avoid cavitation.
Reciprocating Pump
A pump type classified under positive displacement pumps that utilizes a back-and-forth motion of a piston, plunger, or diaphragm.
Operating Point
The intersection point between the pump performance curve and the system resistance curve.
Multistage Centrifugal Pump
A pump featuring multiple impellers in series, commonly used for high-pressure boiler feed applications.
Peristaltic Pump
A pump type that operates using a flexible tube progressively squeezed by rotating rollers.
API 610
The standard code that specifies centrifugal pump requirements for the petroleum, petrochemical, and natural gas industries.
Pump Curve Flow Behavior
The characteristic relationship on a pump curve where volume flow rate decreases as the discharge head increases.
Pump Affinity Law for Power
The relationship dictating that pump power increases eight times (P2=23P1=8P1) when pump operational speed is doubled.
Pump Motor Power
The mechanical power required to drive a pump, determined primarily by the total head, flow rate, and pump efficiency.
Mechanical Seal
The most reliable shaft sealing method used to prevent leakage in high-pressure pumps.
Fan Efficiency
The measure of fan performance defined mathematically as: η=Input shaft powerOutput air power
Propeller Fan
The fan type best suited for handling large volumes of clean air at low pressure.
Regenerative Blower
A specialized blower type capable of creating vacuum as well as pressure applications.
Pitot Tube
An instrument commonly inserted into ducts to measure airflow velocity and pressure.
Variable Frequency Drive (VFD)
An electronic controller that regulates motor input frequency and voltage, serving as a common method of fan speed control.
Forward-Curved Fan Blades
A fan impeller blade design that is most prone to erosive wear when operating in dusty conditions.
AMCA Standard 210
A standard specifying laboratory testing methods and aerodynamic performance ratings for fans.
Pneumatic Conveying
A bulk material transport application that utilizes high-pressure blowers to convey solids through piping networks.
Backward-Curved Centrifugal Fan
A centrifugal fan design best suited for applications requiring medium pressure and medium volume air delivery.
Forward-Curved Centrifugal Fan
A fan design characterized by relatively low operational efficiency paired with a compact physical footprint.
Centrifugal Compressor
A dynamic compressor type best suited for long-distance pipeline transmission of high-volume natural gas.
API 617
The industrial standard covering axial and centrifugal compressors for petroleum, chemical, and gas service industries.
ASME PTC 10
The standard performance test code providing procedures and rules for conducting compressor performance testing.
Compressor Surge
An unstable aerodynamic breakdown characterized by flow reversal and severe vibration when flow drops below the minimum surge limit.
Compressor Impeller
The rotating bladed component of a centrifugal compressor that imparts kinetic energy directly to the gas.
Liquid Slugging
A severe cylinder failure caused by the entry of incompressible liquid into reciprocating compressor cylinders.
Single-Stage Centrifugal Compressor with Gear Drive
A compressor type suitable for large office tower HVAC systems requiring high operational reliability and low maintenance.
Compressor Choking
A limiting operational condition in a compressor caused by fluid flow reaching sonic velocity (Mach 1) inside internal passages.
Geometric Mean Pressure
The mathematically optimal intercooler pressure for a multi-stage compressor, calculated as the square root of the suction and discharge pressure product.
Cooling Range
The temperature difference between the hot water entering a cooling tower and the cooled water leaving the tower.
Cooling Tower Effectiveness
The thermal efficiency of a cooling tower defined as: Effectiveness=Range+ApproachRange×100%
Wet-Bulb Temperature (WBT)
The absolute lower thermodynamic limiting temperature achievable for water cooling in cooling tower analysis.
Polyvinyl Chloride (PVC)
A lightweight, corrosion-resistant plastic commonly utilized to fabricate cooling tower fill material.
Legionella Growth
A dangerous bacterial proliferation resulting from microbial contamination and favorable warm-water conditions in cooling towers.
Nozzle Clogging
A cooling tower distribution malfunction that causes uneven water distribution across the fill pack.
Induced Draft Tower
A mechanical draft cooling tower configuration with fans located at the discharge that is least affected by ambient wind direction.
Approach Temperature
The temperature difference between the cold water leaving a cooling tower and the ambient wet-bulb temperature, which is minimized in efficient towers.
Double-Pipe Heat Exchanger
A heat exchanger consisting of two concentric pipes, where one fluid flows through the inner tube and the other through the annular space.
Number of Transfer Units (NTU)
A dimensionless parameter used in heat exchanger effectiveness-NTU analysis that indicates the physical size and heat transfer capability of the unit.
TEMA
The Tubular Exchanger Manufacturers Association, which provides standard mechanical design, fabrication, and performance specifications for shell-and-tube heat exchangers.
Plate Heat Exchanger
A compact heat exchanger design formed by metal plates with corrugated passages, ideal for compact, high-efficiency thermal duty.
Kettle Reboiler
A pool-boiling shell-and-tube heat exchanger configuration commonly utilized at the bottom of industrial distillation columns.
Baffled Shell-and-Tube Exchanger
A heat exchanger configured with shell-side baffles to induce crossflow and turbulence, thereby reducing fouling.
Economizer
A heat recovery heat exchanger best suited for reclaiming residual thermal energy from high-temperature exhaust flue gases.
Conveyor Capacity
The volumetric and mass transport throughput of a conveyor, fundamentally determined by cross-sectional area, linear velocity, and material bulk density.
Bucket Elevator
A continuous mechanical material-handling device used specifically for the vertical lifting of bulk solid materials.
Screw Conveyor
A conveyor type that moves bulk solids using a rotating helical flighting (blade) positioned inside an enclosed trough or cylindrical tube.