1/63
Looks like no tags are added yet.
Information must review pre-flight
Notes, weather reports and forecast, known, etc, traffic, delays, runway, links, Alternatives, fuel requirement, takeoff, and landing distance data
Remember: NW KRAFT
What three types of VFR Aeronautical charts commonly used
Sectional aeronautical charts-Visual navigation slow to medium speed aircraft revised every 56 days
VFR terminal Area charts TAC- show class B airspace similar to sectional chart, but more detail scale is larger revised every 56 days
VFR fly away planning charts- printed on the river side of TAC charts coverage is the same as TAC. Depict flight paths and altitudes to bypass high traffic areas.
How to know printed aeronautical charts are current
Refer to next schedule effective date printed on cover. Check NOTAM.s
What publication provides updates of visual charts between Edition dates
Chart supplement, sectional, aeronautical charts, and VFR terminal area charts updated every 56 days. Also online to check aeronautical information services FAA.
What information to review in chart supplement prior to flight?
Each airport at which landing is intended. The location, elevation, runway, and lighting facilities, available services, UNICOM availability, types of fuel available, control, tower, and ground control frequencies, traffic, information, remarks, and other pertinent information
What are NOTAMs
The notice to airmen provides pilots with time critical aeronautical information that is temporary, information to be published on charts at a later date, info from other operational publication
Describe domestic NOTAM D, FDC NOTAM, International NOTAM, Military NOTAM
Domestic D – information disseminated for all navigational facilities that are part of the NAS, all public use, aero drums, see plain bases and healthy ports listed in chart supplement. Includes taxi closures, personnel, equipment, near or crossing one ways and airport lighting aids
FDC – issued when necessary to disseminate regular regulatory information. Include amendments to publish IEP’s and other aeronautical charts. TFR, high barometric pressure warnings, these are at light activity, ADSB, TISB, FISB service availability, satellite base systems – WAAS or GPS and special notices.
International – published in ICAO format are distributed to multiple countries duplicate information found in US NOTAM
Military Dash pertain to military or joint use navigational aid/airports that are part of the NAS published in the international NOTAM format
Where can NOTAM information be found
Call flight service at 1 800 WXBRIEF As well as the flight service briefing online website
NOTAM search FAA online
In flight FISB via ADSBN
How to determine if any known ATC delays for a cross-country flight
By checking the NOTAMs And consulting FAA traffic management program TMP resources. Ground delay, and route restrictions can be found on the flight service briefing, phone number or website 1-, 800 WXBRIEF. Also can be found on FAA operational status webpage or ATIS broadcast at affected airports.
Three common ways to navigate
Pilotage- Reference to visible landmarks/Checkpoints. Commonly used along with dead reckoning and VFR radio nav.Visually identifies landmark outside the plane and compares their position with their position on chart relative to plotted coarse line. Choose easy to locate points like large towns, lakes, and rivers
dead reckoning-Computing direction and distance from known position. Navigation by means of computation based on time, airspeed, distance, and directionPeriod. Use with pilotage for cross country flying.
Radio navigation – use of radio aids
What factors to consider when choosing checkpoints on cross country flight?
Visibility and size – easy to identify from air, large, rivers, lakes, highways, towns, or prominent terrain features
Contrast and uniqueness – features that contrast with the surrounding environment example right blue lake in a forest area
Distance and spacing – spaced appropriately to maintain situational awareness typically every 10–20 minutes of flight time
Redundancy – choose multiple landmarks along route to cross check position. Important in parse or repetitive features such as deserts or plains
Back up for navigational aids-navigation fixes in case GPS aid fails, visual landmarks
Lighting and weather – consider how weather condition conditions, time of day, lighting affect visibility of landmarks
Safety considerations – selection, landmarks near alternate, airports, or emergency, landing sites to provide options in case of unplanned diversion
What are some ways pilot can confirm they are over the correct checkpoints and landmarks
Visual references
GPS and flight planning Tools
VORRVORTAC stations – by tuning in pilots, can’t confirm their location using the aircraft navigation system
ATC communication – pilots can request position reports to verify their location when they are in controlled airspace or near large airports
Time and distance – pilots can use time checks and estimated distance distances between checkpoints to calculate their position based on the plane speed
What factors should a pilot consider when planning the route of flight for VFR cross-country flight?
Airspace – avoidance of certain special use, airspace, example restricted areas, alert areas, CFA, TFR, active MOA
Airport – availability of airports are suitable landing areas in case of emergency, available fuel, and services
Terrain and obstacle clearance – can the plane fly over it or around it avoid of rugged or hostile terrain
Navigation/communication capability – availability of landmarks, VOR signal reception, if using VR navigation, communication
Factors to consider when selecting cruise altitude for VFR cross country flight
Triple length – longer distance make higher altitude better fuel consumption. Shorter distance make lower altitudes better. Less Time in Climb =Better ground speed= Less fuel used
Winds aloft- Headwinds versus tail wins and time and Fuel used
Aircraft performance – time to climb, optimum TAS/fuel consumption. Plain altitude limitations.
Terrain and obstacles –
Gliding distance – higher altitudes equal longer glides
VFR cruising altitude
Airspace – fly above rather than through
Weather – turbulence, cloud, freezing level
What is maximum elevation figures
Highest elevation, including terrain, and other vertical obstacles like towers, trees within a quadrant. Rounded up to the nearest 100 foot value. The last two digits are not shown. Indicated in thousands and hundreds of feet MSL.
Lowest altitude aircraft may be operated over as wildlife refuge, national Park or forest service area
Minimum of 2000 feet a GL
What is lines of latitude and longitude?
Latitude – ladders, parallel, the measure north, or south of the equator in degrees, minutes, seconds
Longitude – a.k.a. Meridians Measurement east or west of the primary Meridian in degrees, minutes, seconds. Prime Meridian 0° longitude in Greenwich, England.
Difference between course and a heading
Course-Intended path of an aircraft over the Earth
Heading – direction in which airplane nose is pointing during flight. He has the WCA applied to the course.
What is magnetic variation?
The compass area caused by the difference in the magnetic north and the geographic North Pole. East variation or west variation.
What is isogonic Line?
Shown on charts as broken, magenta line connects points of equal magnetic variation. They show the amount and direction of magnetic variation.
How to convert true course or heading to magnetic course or heading
East list –
West is best +
What is magnetic deviation?
Compass needle deflection due to magnetic influences within the airplane itself example, electrical circuits, radios, lights, tools, engine, magnetized, metal parts, etc. Deviation is different for each plane so it is found on a deviation card located in the plane
How to explain true course, magnetic course, magnetic head, true head, variation, deviation, compass, heading
TC-course measured on aeronautical chart
MC – true course with variation applied
Magnetic heading MH – MC with WCA applied
True Head TH – true course with WCA applied
Variation – obtained from isogonic Line on chart east is least West’s best
Deviation – obtained from deviation card in the aircraft
Compass CH – magnetic head corrected for deviation
How to obtain preflight briefing, complete a flight log, file simulated flight plan
1 800 WXBRIEF= Briefing for latest most current weather, airport and en route NAVAID info. Self brief using online automated Weather resources.
Draw course, Line and Mark checkpoints
Enter checkpoints on log. Measure distance between checkpoints and total length leg.
Enter NAVAID on log
Enter VOR courses on log
Enter altitude on log, enter the wind and temperature on log, measure TC on chart and enter on log, compute TAS enter on log, compute WCA and ground speed. Enter on log, determine variation from chart enter on log, determined deviation from compass correction card enter on log, enter compass, heading on log, measure distances on chart enter on log, figure ETE and ET enter on log, calculate fuel, burn, and usage. Enter, compute weight and balance, compute takeoff, and landing performance, complete flight plan form, file flight plan with flight service.
What are some ways to find in-flight weather update?
Flight service FSS – 122.2 to speak with briefer for a real time updates includes METAR, TAF, PIREP, SIGMET
ATC – basic weather info ex reported conditions, significant changes or hazards along route
Automatic weather services like AWOS and ASOS
Data link weather – pilots with ADSBN can access graphical weather data, including radar, METAR, TAF, wins aloft
On board radar and lightning detection – aircraft equipped with the weather, radar or storm scopes can provide real time, data about precipitation, thunderstorms, and lightning
PIREP – info about actual conditions, icing, turbulence all along route
Electronic flight bags, EFB – app based programs connected to in flight connectivity deliver real time weather updates
What is the small blue star after the CT tower frequency?
Indicates airport has rotating beacon that operates from sunset to sunrise or during periods of reduced visibility. Beacon helps identify the airport at night or in marginal weather conditions.
Green and white flashes civilian land airport
Alternate, white and green and white military airport
Formula for Time, speed and distance
Time = D/S multiply 60
GS= D/T multiply by 60 mins
D=GSxT Divide by 60mins
Practice probs on page 328.
What’s density altitude and pressure altitude formula
1. Pressure altitude
PA = Elevation +(29.92-Altimeter) x 1000
The altitude your aircraft would read if the altimeter were set to standard pressure (29.92
2. Density altitude
DA = PA+120(OAT-ISA)
PA corrected for non-standard temp
First find standard temperature (ISA):
ISA=15-2(Altitude/1000)
Remember: High density altitude = poorer aircraft performance, longer takeoff roll, and reduced climb performance.
Practice ground beef, true Head problem Paige 330
On CX three
What information required in VFR flight plan
Aircraft ID # , Radio call sign if needed
Aircraft type. If information the type of each aircraft and number of aircraft information.
Full name and address of PIC
Point and propose time of departure
Propose route, cruising altitude or flight level and true air speed at that altitude
Point of intended, landing, and estimated elapse time until over that point
Amount of fuel on board in hours
Number of persons in aircraft
Any info PIC or ATC believe is necessary
How can pilot file VFR flight plan will ATC automatically activate it
Recommended strongly VFR flight plan file with flight service station. Pilots are responsible for activating flight plans with a FSS. CT personnel do not activate VFR plans automatically.
What is DVFR flight plan
Defense VFR. VFR flight but for DOD and law enforcement into ADIZ are required to file DVFR flight plans for security. IFR or DVFR aircraft must depart within five minutes of the estimated departure time contained in that flight plan.
How can flight plan that has been filed with flight service be activated
Pilots encourage to activate VFR flight plans with flight service. Do this by Radio or other electronic means. Can also Call 1 800 WXBRIEF on ground and have them activate at ETD or call flight service in the air
How to determine what frequency to use for activating a VFR flight plan once airborne?
Ask FSS briefer during the pre-fight weather briefing
Consult communication section under flight service for airport departure in chart supplement
Sidenote: pilot is responsible For canceling and closing flight plan with the nearest FSS or May request ATC facility to relay cancellation F1 is not available
If you fail to report or cancel your flight plan 1.5 hr after your ETA search and rescue procedures are started
What is minimum safe altitude to operate over congested area of the city. In other areas, then congested area, what min safe altitudes to use?
No person may operate aircraft over congested area of a city, town, or settlement, or over an open air assembly of persons…. Below 1000 feet a GL within 2000 feet horizontal of the aircraft
Except when necessary for takeoff or landing
In non-congested areas: Aircraft shall not be operated lower than 500 feet AGL except over open water or sparsely populated areas. Aircraft may not be operated closer than 500 feet to any person, vessel, vehicle or structure.
Define minimum safe altitude
An altitude that allows if power unit fails and emergency landing without hazard two person or property
If altimeter Setting not available b4 flight what to do
Elevation of the departure airport or Appropriate altimeter setting Available before departure
VFR Fuel requirement day
Must be able to fly to first point of intended landing, and assume normal, cruising speed and to fly after that for at least 30 minutes
VFR Fuel requirement night
45 minutes From A to B at normal cruising speed
When operating aircraft VFR at altitude of more than 3000 feet HEL what rules apply concerning specific altitudes flown
3000 feet HEL but less than 18,000 feet MSL
0° – 179° Fly at odd thousand foot MSL +500 feet ex: 3500,5500,7500
180° – 359° Fly at 11,000 foot MSL +500 feet
Ex: 4500,6500,8500
Navigational aid: VOR or VORTAC what is that?
VOR – very high frequency on knee directional range RVHF radio stations that project radios in all directions 360° from the station. Each radio is denoted by its outbound, magnetic direction. Almost all VOR stations will also be VORTAC.
VOR frequency range operates between 108 and 117.95
Vortac VOR tactical air navigation provide standard bearing information of VOR plus distance information to pilots that have distance measuring equipment DME
What is a VOR radial
A line of magnetic bearing extending from Omni directional range VOR. VOR projects 360° radials. Always identified by their direction FROM The station
What is DME?
Distance measuring equipment is an ultra high frequency UHF navigational aid present with VOR/DME and VORTAC. Measures in NM, the distance of a plane from a VOR/DME or VORTAC. Reliable signals received at distances up to 199NM @Line of site altitude.
What is a VOR minimum operational network?
VOR MON Backup system for navigation in event GPS outage. FAA kept a small amount of VOR stations as part of this network to make sure we can still navigate using VOR signals. It allows aircraft to navigate to airport within 100 and M that has instrument approach procedure not reliant on GPS. Primarily designed for plane operating at or above 5000 VAGL. Pilot can console aeronautical charts and FAA publications to identify MON designated VOR
What is reverse sensing in regard to VOR navigation
When pilot incorrectly interprets the VOR indication due to improper set up/usage. It’s when the CDI – core deviation indicator shows the opposite of the direction of the correction needed to stay on course.
Example flying toward a VOR with the from versus TO
To avoid this ensure correct course is dialed in VOR receiver
Modern systems with HSI – horizontal situation indicators, eliminate reverse, sensing because it provides proper indication, regardless of of course, selection
Where can pilot find information on location of the nearest VOT testing station?
VOT – VOR test facility
Chart supplement – VOT frequencies and associated locations for airports or en route facilities
Explain global positioning system GPS
Is a satellite based radio navigation system that broadcast a saying no use by receivers to determine precise position anywhere in the world. Receiver tracks, multiple satellites and determines a range measurement that is used to determine the user location.
What is the purpose of RAIM
Receiver anonymous integrity monitoring RAIM is a self monitor function performed by GPS receiver to ensure that adequate GPS signals are received from all satellites at all time.
Requires reception of at least five GPS satellites.
Where to obtain RAIM Availability information
Using manufacturer supplied RAIM prediction tool
Service availability prediction tool SAPT on website
Request GPS RAIM info from FSS during pre-flight
FRAIM capability is lost in flight. Can you continue GPS?
No, the pilot has no assurance of accuracy with the GPS position
How to determine what type of operation a GPS receiver is approved for
Check the POH/AFM and supplements to determine the limitations and operating procedures for that specific GPS
Where to obtain GPS NOTAMs
The federal note on system FNS website
How many satellites does a GPS receiver required to compute his position?
2-D, 3-D, 3-D and RAIM,
2-D – three satellites, latitude and longitude position only
3-D four satellites, yield latitude, longitude, and altitude
3-D and RAIM 5–6 satellites
What is WAAS
Wide area augmentation system WAAS
Ground and satellite navigational error correction system. Provides accuracy enhancements to signals received from GPS. Extremely accurate lateral and vertical signals to aircraft equipped with GPS/WAAS enabled certified equipment.
What are VFR Way points
Tool to assist with position awareness while navigating visually an aircraft with GPS. Navigational aids for pilots unfamiliar with the area. Waypoint names, five letter identify beginning with a VP retrievable from navigational databases and should be only used when operating under VFR conditions.
What is ADS – B?
Automatic dependent surveillance broadcast – surveillance system broadcast. It’s GPS position and altitude and velocity over the data link and is received by ground base transmitter/receiver for processing and display at ATC facility.
ADSB in Can receive these broadcast and display the info to improve situational awareness
How does a transponder operate?
Airborne radar, beacon receiver/transponder portion of ATC radar beacon systems. It automatically receives radio signals on ground and replies with a specific reply, pulse or pulse group to those being received on the mode.
Difference between mode A, mode C, mode S transponders
Mode a – transmit position, four digit identifying code
Mode C- transmits position and pressure altitude
Mode S – transit position, PA and permit data exchange
what are the following transponder code?: 1200, 7500, 7600, 7700
1200 – VFR
7500 – hijack
7600 – communication fail
7700 – emergency
would a pilot need to divert during the flight?
Unexpected weather, system, malfunction, pilot, or passenger emergency, closed, runway or airport
How to prepare for potential divergent before takeoff
Check charts for airports Or suitable landings along or near route
Check for navigational aids that can be used during a diversion
Carrie additional reserve Fuel
Ensure updated whether is available in flight
If it becomes a parent that you cannot locate your position, what is recommended? 4Cs
Climb – higher ALT is better communication and visual
Communicate – 121.5 if no other frequency produces results. It is guarded by FSS, CT, military towers, approach, control, facilities, and air route traffic control centers.
Confess – once communication established let them know
Comply
What is ARTCC?
Air route traffic control center ARTCC
Facility that provides ATC service to IFR flight plans within controlled airspace during en route flight
What is universal VHF emergency frequency
121.5 are guarded by military towers, most civil towers and radar facilities. If ARTCC does not respond when called on 121.5 call the nearest tower.