1/11
Looks like no tags are added yet.
What are the possible sources of low pressure compressed air used for starting jet transport aircraft equipped with air turbine starters?
Ground power unit, APU or compressed bleed air from another engine
How is the structure around a turbine engine usually protected from excessive heat?
By insulation blankets
What material is the insulation blanket used to protect aircraft structures made of?
Fiberglass and metal foil sheets
How are turbine engines cooled?
By approximately 75% of the air passing through the engine
In a turbine engine, where does bleed air come from that is used to cool bearings and other parts?
The compressor section
What is the relationship between turbine engine upper temperature limits and power produced?
Higher temperatures that the engine can withstand will allow for higher power to be produced
What is the approximate percentage of air passing through a turbine engine that is used for cooling rather than combustion?
75%
What can be done to effectively allow higher gas temperatures in the turbine section of some engines?
Compressor bleed air ducted through hollow sections in the turbine inlet guide vanes and first stage rotor blades can lower temperatures enough to prevent heat damage.
What is the purpose of cowl flaps and how are they operated?
To control amount of airflow through cowl for cooling, mechanically, electronically or hydraulically
How does an augmenter cooling system work?
Outer tube placed over exhaust creates venturi effect pulling more air through engine cowling
Where should cowl flaps be positioned for ground operations?
Open
What type of power is used to operate cowl flaps?
Mechanical, electronic, hydraulically