1/69
These flashcards cover key vocabulary and concepts related to powders, containers, and compounding from the lecture notes.
Is this a disadvantage of powders as a dosage form compared to tablets and capsules “It is more difficult for patients to measure the dose of a powder accurately”?
Yes
Is this a disadvantage of powders as a dosage form compared to tablets and capsules “Powders have a slower dissolution rate”?
No
Is this a disadvantage of powders as a dosage form compared to tablets and capsules “It is more difficult to adjust the dose for powders”?
No
Is this a disadvantage of powders as a dosage form compared to tablets and capsules “Powders are not a proper dosage form for patent drugs”?
Yes
Is this a disadvantage of powders as a dosage form compared to tablets and capsules “It is more difficult to swallow powders”?
No
Particle size
A key characteristic of powders affecting all physical properties
Angle of reposition is for which characteristics of powders?
Flow
Microscopy is for which characteristics of powders?
Geometric shape of particles
Loss of drying is for which characteristics of powders?
Moisture
Sieves is for which characteristics of powders?
Particle size
Rate of precipitation is for which characteristics of powders?
Particle size
Coulter Principle is for which characteristics of powders?
Particle size
Angles of repose
Used to determine the flow of powders; lower angles indicate better flow.
Considering the angles of repose below, which powder has the best flow?
10º
Considering the angles of repose below, which powder has the worst flow?
90º
T/F: The main disadvantage of granules is a lower compressibility compared to powders
False
Wet granulation is time consuming and increases the risk of chemical instability for some drugs.
True
T/F: Fluid bed dryer is expensive and requires specific space and skilled and trained workers
True
T/F: Dry granulation is the most time consuming and expensive method of granulation.
False
T/F: Mixing granules with fine powders is challenging
True
T/F: Dry granulation offers the most control over the uniformity of the granules
False
T/F: Granulation provides the opportunity of formulating sustained release products
True
Which granulation is the most inexpensive?
Dry granulation
Which granulation is the most expensive?
Fluid bed dryer
Which granulation is the most complex?
Fluid bed dryer
Which granulation is the least complex?
Dry granulation
Which granulation is the most time consuming?
Fluid bed dryer
Which granulation is the least time consuming?
Dry granulation
Hausner Ratio
The ratio comparing tapped density to bulk density, indicating the flow ability of a powder.
Which packaging is designed specifically to prevent moisture permeation?
Tablet blisters
T/F: Glass grain test evaluates the resistance against light.
False
T/F: Surface glass test evaluates permeability.
False
T/F: Glass grain test and surface glass test evaluate the same quality
True
T/F: Type II glass (soda lime with treated inner surface) offers the highest quality
False
T/F: Hydrolytic resistance is particularly important for aqueous liquid containers
True
What is the highest quality of glass?
Type I glass (borosilicate)
What is the lowest quality of glass?
Type III glass (soda lime)
Humidity
Tight containers – most important for solid dosage forms
Oxygen
Replacing oxygen with an inert gas
Temperature
Usually handled by controlled storage conditions
Light
Light resistant containers
Bulk density
Mass per unit volume of a powder; important for understanding its compaction characteristics.
Granulation
The process of forming granules from powder, important for tablet production and stability.
Solid dosage form department created granules that were compressed into 20 million tablets yesterday. Today, after packaging 5 million tablets, you ran out of aluminum foil used in the strips and had to switch to a different supplier. Which is true?
The product should have one batch number and two lot numbers
Batch numbers
used to identify a specific production run of a product, allowing for traceability and quality control
Lot numbers
Unique identifiers for specific quantities of products produced in a single run or production cycle
Cross-contamination
The presence of foreign particles or microorganisms in pharmaceutical products, which can compromise safety.
T/F: Cross-contamination refers to presence of foreign particles and microorganisms in the pharmaceutical product
False
T/F: Personnel and material traffic can increase the risk of both contamination and cross-contamination
True
T/F: The size and separation of the manufacturing spaces can contribute to contamination only
False
T/F: Defined specifications of the spaces (such as air pressure) can affect the risk of both contamination and cross-contamination
True
T/F: Proper labeling reduces the risk of both contamination and cross-contamination
True
T/F: Sanitation affects the risk of contamination, but not cross-contamination
False
T/F: Limit of detection is the smallest signal that is distinguishable from background noise
True
T/F: Limit of quantification refers to is the smallest value that can be quantified reliably with acceptable error
True
T/F: Repeatability refers to inter-laboratory replications
False
T/F: Ruggedness refers to the changes in results when the experiment is performed in a different lab
True
T/F: Ruggedness and Robustness are synonyms and can be used interchangeably
False
Which SOP is ineffective and should be re-evaluated if a contaminated small volume injection is recalled? Complaints
No
Which SOP is ineffective and should be re-evaluated if a contaminated small volume injection is recalled? Recalls
No
Which SOP is ineffective and should be re-evaluated if a contaminated small volume injection is recalled? Sterilization
Yes
Which SOP is ineffective and should be re-evaluated if a contaminated small volume injection is recalled? Quality control for sterility
Yes
Which SOP is ineffective and should be re-evaluated if a contaminated small volume injection is recalled? Quality control for primary packaging material
Yes
SOP for contamination
Standard Operating Procedure related to the management of contamination and recalls, requiring review in case of contamination incidents.
A toxic impurity is detected in one of the tablets that your plant is producing. What SOP requires validation to resolve the problem? In process Control
Yes
A toxic impurity is detected in one of the tablets that your plant is producing. What SOP requires validation to resolve the problem? Sterilization of final product
No
A toxic impurity is detected in one of the tablets that your plant is producing. What SOP requires validation to resolve the problem? Stability testing
Yes
A toxic impurity is detected in one of the tablets that your plant is producing. What SOP requires validation to resolve the problem? Analytical method used in quality control
Yes
A toxic impurity is detected in one of the tablets that your plant is producing. What SOP requires validation to resolve the problem? Recall
No