1/68
Comprehensive vocabulary flashcards covering the structure, mechanical properties, testing methods, and manufacturing processes of metals, polymers, ceramics, and composites.
Unit Cell
The smallest repeating unit of atoms in a crystal structure, bounded by imaginary lines connecting atomic centers.
Space Lattice
The complete three-dimensional framework and largest structural pattern formed by connecting atomic positions with imaginary lines.
Body-Centered Cubic (BCC)
A metallic crystal structure characterized by a high melting point, high yield strength, and low ductility.
Face-Centered Cubic (FCC)
A metallic crystal structure found in copper, lead, nickel, silver, and aluminium that is more ductile and more easily deformed.
Hexagonal Close-Packed (HCP)
A metallic crystal structure possessing low plasticity due to the increased spacing between its planes.
Dislocation
A crystalline defect arising from crystal mismatch during solidification or phase transformation, the addition of alloying elements, or applied external stress.
Solid Solution Strengthening
A strengthening mechanism in which impurity atoms of different sizes are added to a pure metal to impede dislocation motion.
Precipitation Hardening
A heat-treating process where larger solute atoms cluster into collected mass barriers that obstruct dislocation movement.
Quench Hardening
A rapid cooling heat treatment that strengthens metals by trapping solute atoms directly within the crystal lattice.
Ferrous Metals
Metals and alloys that contain iron as their primary base element.
Steel
An iron alloy containing between 0.06% and 2% carbon.
Pure Iron
Iron containing less than 0.005% carbon.
Cast Iron
An iron alloy with greater than 2% carbon that is too brittle to be formed mechanically and must be shaped by casting.
Hot Finishing
A high-temperature metal finishing process that recrystallizes the grain structure.
Cold Finishing
A room-temperature metal finishing process that reduces grain size and strengthens the material.
Galvanized Steel
Steel that has been hot-dipped and coated in zinc; paint does not naturally adhere to its surface.
Galvannealed Steel
Steel coated with zinc and subsequently heat-treated so that paint can adhere.
Austenitic Stainless Steel
A stainless steel grade where corrosion resistance is critical, widely utilized in food and dairy applications.
Ferritic Stainless Steel
A magnetic grade of stainless steel commonly used in automotive applications.
Martensitic Stainless Steel
A stainless steel grade capable of being hardened by heat treatment, commonly used for cutlery.
Powder Metallurgy
A manufacturing process where metal powders are compacted and sintered, followed by forging.
Amorphous Thermoplastics
Thermoplastics consisting of non-rigid, randomly oriented molecular chains (e.g., polycarbonate, polystyrene, ABS, PVC) that melt over a broad temperature range and degenerate near their glass transition temperature.
Crystalline / Semicrystalline Thermoplastics
Polymers composed of organized chains interspersed with amorphous zones, exhibiting higher strength, greater stiffness, and high insulative properties, but lower impact resistance.
Liquid Crystalline Polymers (LCPs)
Polymers with highly ordered, rod-like molecular structures that retain their order upon melting, exhibiting minimal shrinkage and warpage.
Plasticisers
Non-plastic additives blended into polymers to increase chain flexibility.
Copolymer
A polymeric material synthesized from two different monomers that can exhibit entirely distinct properties from either precursor, organized in random, alternating, block, or graft arrangements.
Terpolymer
A polymer comprised of three different monomer units, such as ABS.
Weld Lines
A polymer molding defect occurring when meeting melt fronts have impurity layers that prevent proper bonding, resulting in a localized mechanical weakness.
Residual Stress
Internal stress trapped within a molded plastic component due to uneven cooling or differential material shrinkage.
Ceramics
Inorganic nonmetallic materials composed of metallic and non-metallic elements, characterized by extreme brittleness, high compressive strength, low plasticity, and excellent thermal insulation.
Composite Material
A material created by combining two or more distinct materials (a matrix and a reinforcement) to obtain properties unachievable in any single component.
Stress
The force applied to a material per unit area that causes it to change shape.
Strain
The measure of deformation or elongation experienced by a material under applied stress.
Elastic Limit (Point A)
The point on a stress-strain curve beyond which a stressed material will no longer return to its original shape upon release.
Yield Stress (Point B)
The stress level at which a material begins to deform permanently and can elongate with little to no increase in stress.
Elasticity
The ability of a material to undergo deformation under load and completely recover its original dimensions when the stress is removed.
Plasticity
The property of a material allowing it to undergo permanent deformation without tearing or fracturing.
Modulus of Elasticity
The ratio of stress to strain within the elastic deformation range of a material.
Tensile Strength (UTS)
The ultimate maximum stress a material can withstand under tension before necking and fracture.
Ductility
A measure of how far a material can be drawn, pulled, or stretched under tensile load before snapping.
Malleability
The capacity of a material to deform plastically under compressive loading without cracking.
Hardness
The ability of a material surface to resist scratching and surface indentation.
Brittleness
The tendency of a material to fracture under applied stress with little to no preceding plastic deformation.
Charpy and Izod Tests
Pendulum impact tests used to assess material toughness; Charpy supports a notched specimen horizontally as a simple beam, whereas Izod fixes it vertically as a cantilever.

Creep Resistance
The ability of a material to withstand gradual, time-dependent permanent deformation under sustained prolonged mechanical loading.
Wrought Iron
An iron alloy with minimal carbon content containing slag impurities that produce a visible fibrous grain appearance.
Gray Iron
A general-purpose cast iron featuring graphite flakes that provide self-lubricating resistance against metal-to-metal wear and superior machinability.
Ductile / Nodular Iron
A cast iron that possesses higher tensile strength than gray iron and mild steel, but is not as easily machinable as gray iron.
Malleable Iron
White iron that has undergone extensive heat treatment to improve ductility and toughness.
White Iron
An extremely hard, wear-resistant, and abrasion-resistant cast iron produced by rapid cooling.
Cope and Drag
The upper half (cope) and lower half (drag) of a split molding flask used in sand casting.
Riser
An extra cavity in a sand casting mold that acts as a reservoir of molten metal to feed the casting and prevent shrinkage cavities.
Die Casting
A permanent mold casting process for non-ferrous alloys that forces molten metal under high pressure into steel dies, achieving tight tolerances, thin walls, and fine surface finishes.
Investment Casting
An expendable mold process where an expendable wax pattern is surrounded by plaster or ceramic slurry, melted out, and filled with molten metal.
Centrifugal Casting
A casting method where molten metal is poured into a rapidly spinning mold, using centrifugal force to shape the part.
Forging Grain Flow
A characteristic of plastic deformation where metal grains deform continuously along the contoured shape of the component, eliminating continuous weak grain boundary lines present in casting and machined stock.

Upset / Heading Forging
A specialized forging technique used to expand the cross-sectional area of a wire or rod, commonly employed to form screw and bolt heads.
Swaging
A forging operation where a round metal workpiece is hammered radially inward from all sides to reduce its diameter or form a taper.
Direct Extrusion
A plastic forming process where a heated metal billet is forced through an open die by a hydraulic ram to create continuous cross-sectional shapes.
Sheet Metal vs. Metal Plate
Sheet metal designates flat rolled stock with a thickness of <6mm, whereas metal plate refers to stock with a thickness of >6mm.
Air Bending
A sheet metal bending method where a punch forces sheet metal into an open die cavity contacting only three points, allowing multiple bend angles with a single set of tooling.
V-Die Bending
A sheet bending process where the metal is fully bottomed out against a matching V-shaped punch and die set.
Hydroforming
A metal forming process in which internal hydraulic fluid pressure expands a tube or pipe outward against the internal geometry of a rigid forming tool.

Co-Injection Molding
A specialized injection molding method where a polymer skin is injected, followed by a core material, and encapsulated by skin resin to hide cheaper or structural materials.
Blow Molding
A thermoplastic forming process where molten polymer is extruded as a hollow tube around an air annulus, enclosed in a split mold, and inflated with air to form hollow bottles or parts.

Calendering
A sheet-forming method where molten plastic resin is fed through a series of heated rolls, followed by cooling rolls, edge trimming, and take-off to make thin sheets and tiles.

Rotational Moulding
A low-pressure polymer molding technique in which a hollow mold charged with resin powder is heated and rotated on two axes to coat the mold walls, producing large, seamless hollow parts.

Thermoforming
A plastic forming process where an extruded polymer sheet is heated, placed over a mold, and pulled into the final shape using vacuum pressure.
Solid Phase Forming
A polymer shaping technique performed below the melting temperature, heating the material only to its softening point before stamping or deformation.