1/46
Looks like no tags are added yet.
Lithography is derived from the Greek word that means
Stone writing
Who is credited with inventing air conditioning in 1902 to improve the manufacturing process in a printing plant that suffered from excessive humidity, which wreaked havoc on the inks and papers used to print
Willis Carrier
The lithographic process was developed by the German inventor ______________, who discovered that by treating limestone with gum arabic, nitric acid, and a mixture of soap and tallow, he could make parts of the stone repel printing ink and parts of it repel water. In 1798, this process was perfected for use in ____________.
Alois Senefelder, printing
Of the over 3 trillion pages that are printed worldwide for commercial and marketing purposes, what percentage is printed by means of conventional offset lithographic press technology?
More than 80%
In terms of pages per hour (pph), a typical 40-inch sheetfed offset press would be over ______ times ________ productive than an HP Indigo 12000 digital electrostatic press if you were running a 4/4 (four color process, "perfected") job.
20, more
A Heidelberg SM102 full-sized, offset lithographic press can produce 18,000 four-color 16-page signatures with one pass through the press. The term used to describe the ability to print both sides of the press sheet with one pass through the press is ___________
perfecting
Among the newest HP Indigo Digital Presses is an "Indigo 100K." Its maximum sheet format size is "B2," which is approximately 28 x 20 inches.
B1 Sheet is 40" x 28"
T/F: Non-image areas of an offset lithographic plate are termed "oleophilic" — and could also be described as "aquaphobic."
True
Oil-based offset lithographic inks are termed __________________, meaning that as they are worked over time, shearing forces reduce their viscosity.
Pseudoplastic
T/F: It typically takes the standard offset lithographic ink that we use in our lab about 24 hours to fully polymerize and "set."
True
The base material also used as the oleophobic image areas of a conventional offset litho plate is:
Aluminium
Ink sequence on an offset lithographic press is determined by _________ and is typically ordered as
tack, KCMY
The concept of inks and paper adhesion compared to a peanut butter and jelly sandwich relates most closely to this measurable: ______________
Ink Tack
Ink is transferred to the substrate via the _________ cylinder.
blanket
If ink keys are incorrectly set (too low) to create adequate coverage amounts for a layout on a press sheet from lead to tail, the most likely error would be termed: ______________________
mechanical ghosting
Which type of VDP has greater value, "push" or "pull"?
Pull
The system in a typical offset press that controls the paper after the image is printed by stacking to allow further processing is the: _________________________
Delivery system
How can ink levels be controlled on the offset press?
Ink Keys
T/F: On a perfecting blanket-to-blanket web offset press, "perfecting" refers to the fact that this type of press is able to print, dry, and inline finish folded signatures for publications.
True
T/F: The Konica-Minolta and the Indigo are inkjet presses.
False
T/F: A "flying splice" on a webfed press is facilitated through the use of a "festoon."
False
It is important to give paper time to get acclimated to room temperature before you begin to use it. Therefore, you should plan to allow at least ________ hours for paper to acclimate prior to pressroom conditions before running it.
24
How does the ink used in this press dry? and sheet fed?
heat set: heated hair
sheetfed: oxidation over 24 hours
T/F: The plate can be angled when the press is running?
False
Ink is measured using a
spectrophotometer
What is the top speed of the Ryobi 3304HA press?
10K IPH (Impression per hour)
T/F: As an offset lithographic ink is heated, its viscosity decreases.
True
The Ryobi 3304HA offset press in our Godfrey Hall lab running at full speed is ______ times more productive than the HP Indigo 7900 in our lab.
3
A web offset press can produce _______________ pages per hour, 24 hours per day.
64,000
In "blanket-to-blanket printing," which cylinder effectively acts as the impression cylinder?
The opposing blanket cylinder
After exiting the oven unit of the press, how is the paper web prepared to endure the forces applied during folding and cutting the web?
The web is cooled to 70º F by going through chill rollers. Then a silicone and water mixture is applied to the surface of the paper web.
The inked image on the blanket of an offset lithographic plate is __________-reading.
wrong
______________________________ on a sheetfed offset lithographic press can be mechanical, optical—or ultrasonic, baby!
Double sheet detectors
The most typical unit of measure for sheetfed offset lithographic press production is ___________________ per hour.
Impressions
According to your readings, which type of VDP has greater value, "push" or "pull"?
Pull
On a sheetfed offset lithographic registration unit, the _____________ act(s) to square the press sheet while the ___________________ act(s) to center the press sheet.
Headstops, side guide
The Inkjet printing process is termed a(n) ______________________ process.
Non-impact
As a designer for production inkjet, which element do you have the most influence over?
Paper
The best way to avoid designing with colors that cannot be reproduced with inkjet technology (out-of-gamut colors) is to set up your Creative Cloud applications by simulating your print condition to the correct color space. For production inkjet on uncoated paper, you should synchronize your applications to ______________ in order to show only the colors that can be printed.
CRPC
Total Area Coverage (TAC) refers to the combined percentage of all CMYK inks used within a specific area on a printed page, essentially indicating how much ink is being applied to that section. For production inkjet, the maximum recommended TAC percentage is __________%.
240
The predominant halftone screening process for production inkjet printing is _________________.
stochastic, FM screening
Most production inkjet inks are ___________-based.
water
What can a designer do to create difficulty for a press operator?
Solids or heavy areas of coverage
Fine details
Thin reverse outs
Describe in detail how the offset lithographic process works
1. Set up paper feeder- Acclimation, position paper pile, pile height, vacuum pressure, double sheet detection
2. Set up registration system- Set head stops, set side guide, set tail wheels
3. Plate mounting- Square and centered, tensioned
4. Inking system and dampening system- Adjust default key settings and ink stroke, check dampening conductivity/temp, check nip slip
5. Check registration- Image to press sheet, color to color, traps
6. Bring job up to color- Consult specs for job, measure
7. Obtain an "ok"- Match proof and consult customer
8. Run it!
Compare and contrast the differences between offset lithography and electrophotograpy and inkjet.
the HP Indigo blanket also transfers 100% of the ink to the substrate. The total transfer of ink from the blanket allows the same set of cylinders to be used to print the complete sheet, ensuring precise color-to-color registration and color consistency throughout
10 ways that productivity can be increased in the pressroom
1. Format- increase press size
2. Perfecting, Two sided printing
3. Inline finishing
4. Reduce makeready time
5. Automation
6. Auto registration
7. In press close loop color control
8. Speed, more IPH
9. Auto plate mounting/ changing (-over)
10. Auto job ticketing
11. Parallel processing
Be able to list at least 5 examples of automation in the pressroom
1. mechanically loading substrates
2. mechanically cutting/folding substrates
3. mechanically offloading completed prints,
4. automatic ink drip
5. automatic cleaner