1/27
Looks like no tags are added yet.
What is the purpose of cabin pressurization?
Prevents hypoxia and allows the aircraft to fly safely at higher altitudes.
What type of air is commonly used for cabin pressurization?
Bleed air taken from the compressor section of a turbine engine.
How is cabin pressure controlled?
The outflow valve regulates how quickly air leaves the cabin.
What does the outflow valve do?
Controls cabin pressure by regulating airflow out of the cabin.
What does the dump valve do?
Rapidly releases pressurized air from the cabin when activated.
How is cabin pressure controlled at a selected altitude?
The pressurization controller adjusts the outflow valve to maintain the selected cabin altitude or pressure schedule.
What is cabin differential pressure?
The difference between cabin pressure and outside atmospheric pressure.
What is a negative-pressure relief valve?
Prevents outside pressure from becoming excessively greater than cabin pressure.
What is a safety or pressure-relief valve?
Protects the cabin structure from excessive pressure differential.
What is a squat switch?
A weight-on-wheels switch that detects whether the aircraft is on the ground.
What is a check valve used for in a pressurization system?
Prevents reverse airflow and may help prevent pressure loss if the pressure source fails, depending on the system.
What is the primary function of the pressurization system?
Maintain the desired cabin altitude and pressure.
What generally happens to the outflow valve during a climb?
It generally opens farther to allow air to escape as outside pressure decreases.
What generally happens during a descent?
The outflow valve generally closes more to allow cabin pressure to increase.
What does cabin cycle time mean?
The time required for cabin pressure to change during a pressurization or depressurization cycle.
What are possible inputs to a pressurization controller?
Cabin altitude, aircraft altitude, cabin differential pressure, and selected pressure settings.
What does SOV stand for?
Shutoff valve; its exact function depends on the aircraft system.
What is a venturi?
A narrowed passage that increases airflow velocity and decreases static pressure.
What is maximum differential pressure?
The maximum permitted pressure difference between the cabin and outside atmosphere.
What does a maximum-altitude controller do?
Regulates cabin pressure to maintain the selected or scheduled cabin altitude within system limits.
What are common modes of operation of a pressurized system?
Automatic, manual, and dump or depressurization modes, depending on the aircraft.
What is the purpose of an air-cycle machine?
Conditions air using compression, heat exchangers, and expansion to provide cooled cabin air.
What cabin altitude is commonly used as a design target in transport aircraft?
Approximately 8,000 feet under specified cruise conditions.
What is Part 25?
FAA airworthiness standards for transport-category airplanes.
What is the main job of the outflow valve?
Controls the rate at which air leaves the cabin.
What is the main job of the dump valve?
Rapidly releases cabin pressure.
What is the main job of the negative-pressure relief valve?
Protects against excessive outside pressure relative to cabin pressure.
What is bleed air?
Compressed air taken from a turbine engine compressor.