1/60
meow
Which kind of logic is 2 or more NO inputs in series?
AND
Which kind of logic is 2 or more NO inputs in parallel?
OR
Which kind of logic is a single NC contact controlling an output?
NOT
Which kind of logic is 2 or more NC contacts in series?
NOR
Which kind of logic is 2 or more NC inputs in parallel?
NAND
Which type of logic uses a relay?
Memory Logic
Do ladder diagrams ONLY show control devices (like inputs, outputs), or do they show power devices as well (the inner workings of things like a piston).
Only control devices
What device uses electrical circuits to control pneumatic/hydraulic systems?
Solenoid operated directional control valve
What happens to the spool when you press the manual override button on a DCV (directional control valve?)
Spool will shift
It is standard practice to carry electricity to a solenoid through…
Relay contacts
Do solid state relays have moving parts?
No moving parts
If a prox sensor is connected to a controller input, and the sensor's LED turns on when a target is present, but the LED on the input card does not, what should you measure to troubleshoot?
Measure the SENSOR'S output voltage
A circuit designed to turn off an output after a step is performed is called:
Event de-energizing circuit
Fully automated machines require a:
Continuous-cycle reciprocation circuit
Does a limit switch contain an optical sensor, or does it use physical contacts?
Physical contacts
A control circuit that uses limit switches to sequence a series of events is called:
Event sequencing circuit
A limit switch used to sense if a guard is in place on a machine is called:
Safety interlock switch

What is the state of this limit switch?
Normally open held closed (NOHC)
An on delay timer relay’s contacts will not change state until:
A predetermined time has elapsed
What timer relay starts timing AFTER power is removed, and then turns off the output once the timer is up?
Off delay timer relay
To avoid overheating a motor at startup, what should you do?
Unload it when started
When time delay relays are used in time driven sequencing, they basically take the place of:
Take place of limit switches
The manual control of cylinders through push buttons is called:
Jogging
How many limit switches are needed if synced cylinders are attached to the SAME machine member?
Only 1 since they are on the SAME machine member
What input is used to change a machine from automatic to manual?
Selector switch (to SELECT the mode you want)
Given multiple cylinders of DIFFERENT bore and stroke, what is the best way to sync them?
Flow control valves
What mode is commonly used for machine setup and mainteinance?
Manual

What type of control logic is shown in this image?
NAND (to turn off a light, you would need to open 2LS AND 4LS. Since they are normally closed, you put N in front of AND to make NAND)
Electronic sensors perform the same function as what?
Same function as limit switches
What is a main advantage of an electronic sensor vs a limit switch?
Electronic sensors are faster
What provides a high signal when energized, PNP or NPN?
PNP (think P as positive, so it goes up, also called sourcing)
What provides a low signal when energized, PNP or NPN?
NPN (think N as negative, so it goes down, also called sinking)
What can inductive proximity sensors detect: ferrous, nonferrous, or both?
Both
What principle do inductive proximity sensors use to detect objects?
Mutual Induction
How does a capacitive proximity sensor detect objects?
Creates an electrostatic field using a dielectric
What can the capacitive prox detect?
Basically anything
Are magnetic reed switches solid state, or do they have mechanical moving parts?
Moving parts
What can magnetic reed switches detect?
Items that generate a magnetic field
Is a reed switch polarity sensitive?
No, not polarity sensitive
Which of these 3 materials conduct magnetic lines of force very well?
Ferromagnetic, Paramagnetic, Diamagnetic
Ferromagnetic (think FORCE, FERROmagnetic)
What kind of objects does the Hall effect sensor detect?
Objects that create a magnetic field (similar to a magnetic reed switch)
Do Hall effect sensors move mechanically, or are they solid state?
Solid state
What principle does the Hall effect sensor use to sense objects?
Transduction
When does a photoelectric sensor energize?
When it detects light
What is the principle called that a photoelectric sensor uses?
Photoconduction
What kind of light is commonly used on a photoelectric sensor?
Infrared
When light that strikes a highly polished target is reflected away at the same angle that it strikes the object's surface, it is called:
Specular reflection
Photoelectric sensors where a REFLECTOR reflects light back at the sensor are called:
Retroreflective
How should a flat reflective target be oriented with respect to a retro-reflective photoelectric sensor's beam to trigger its contacts?
Positioned at a 45 degree angle
Electronic sensors usually use a transistor output as the _____ mechanism of the sensor.
Switching
What is an input device’s electrical noise protection called?
Optical isolation
To test an inductive or capacitive prox, what measurements should be taken?
Input and output voltages
Which magnetic reed switch’s current requires a stronger magnetic field to energize the switch, AC or DC?
AC current
If the Hall effect sensor's amplifier is __________, the output of the switch will rapidly change from one state to the other:
Digital
(Think an ANALOG clock SLOWLY changes the time with the seconds hand, while a DIGITAL clock RAPIDLY changes the number shown on the screen)
2 wire sensors (like a magnetic reed switch) should be connected to the:
Controller input and power supply
To test a Hall effect sensor, where should you measure while moving a metallic object near it?
You measure VOLTAGE at the OUTPUT
A Hall effect sensor that senses only __________ can help avoid false triggering of the sensor.
One magnetic polarity
What is the advantage of isolating the input and output of optical relays?
Electrical noise protection

How should the hose connections be made to make the cylinder RETRACT when valve solenoid SOL-1A is energized?
C to P, B to 1, A to 2
What would you expect to read across the output if a solid state relay is NOT working correctly? (high or low)
High
If power terminal connections are made, what is the final connection on a two or three wire sensor?
Controller input terminal (brown and blue go to the power terminal, black goes to the controller input, aka what you are trying to control, like a light or motor)