1/29
Vocabulary flashcards covering operational speeds, carbon monoxide exposure limitations, and checklist items for the Tecnam P2002JF normal procedures.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai | Chat |
|---|
No analytics yet
Send a link to your students to track their progress
Vr
47KTS
Vx
56KTS
Vy
66KTS
Enroute Climb Speed
70KTS
Vref FLAPS LAND
56KIAS
Vref FLAPS T/O
61KIAS
Vref FLAPS UP
66KIAS
Final - Flaps Land Approach Speed
56KTS+ADD
Abeam Threshold / Base Approach Speeds (T/O Flaps / No Flaps)
66/74KIAS
Approach Flaps Limit Speed (<91KIAS)
The airspeed below which flaps are set to take-off (T/O) abeam threshold before slowing down / downwind.
Before Landing Flaps Limit Speed (<69KTS)
The airspeed below which flaps are selected to FULL.
Balked Landing Minimum Speed
MINIMUM 51KIAS
Carbon Monoxide Acceptable Exposure (<50PPM)
8HOURS maximum acceptable exposure time.
Carbon Monoxide Acceptable Exposure (<70PPM)
4HOURS maximum acceptable exposure time.
Carbon Monoxide Acceptable Exposure (<150PPM)
50MINUTES maximum acceptable exposure time.
Carbon Monoxide Acceptable Exposure (<400PPM)
15MINUTES maximum acceptable exposure time.
Cruise Throttle Setting
2100RPM
Cruise Electric Fuel Pump Temperature Threshold
Turn OFF in cruise, but if starting ground temperature is above 25∘C, keep fuel pump ON.
Engine Starting Oil Pressure Threshold
Oil pressure must rise within 10SEC.
Engine Starting Voltmeter Target
14VOLTS
Prior to Takeoff Throttle (Run-up)
1640RPM
Prior to Takeoff Magnetos RPM Check Drop
Check limit of 130/50RPM.
Prior to Takeoff Carburettor Heat RPM Check Drop
Check drop of 100RPM.
Engine Starting Fuel Selector Position
Set to LESS FULL TANK.
Prior to Takeoff Fuel Selector Position
Set to FULLEST TANK.
Engine Shutdown Throttle Setting
1200RPM for 1MINUTE.
Engine Shutdown CO Detector Action
PRESS & HOLD OFF
After Landing Transponder Action
Set transponder code (7000) to SET STBY.
Line Up Items Upon Receiving Take-off Clearance
Set CO DETECTOR to ON and LANDING LIGHT to ON.
Balked Landing Procedure