1/50
Comprehensive vocabulary flashcards covering semiconductor manufacturing processes, statistical process control (SPC), yield engineering, and Samsung interview reference material.
CHE 253M Inline Mixing Project
A technical project evaluating inline mixer consistency using dye concentration, spectrometer absorbance, Beer-Lambert law, and statistical process control (SPC) on 1,000 observations per condition.
CHE 253M Mixing Variation Results
A process evaluation where subgroup range dropped by approximately 31% and dilute Cp increased from 0.567 to 0.823, while still remaining below the target capability threshold.
CHE 317/319 Peer Tutoring Focus
An academic support role helping students understand transport and chemical engineering derivations, physical meanings, assumptions, and governing equations.
SEC Administrative Chair Role
A leadership position focused on coordinating corporate events and engineering outreach by proactively managing logistics, schedules, volunteers, and multi-stakeholder communication.
Samsung Foundry
A semiconductor manufacturing business unit that produces chips designed by external customers.
Samsung Taylor Fab
An advanced Samsung manufacturing expansion site in Texas planned for advanced 2nm production using EUV lithography.
Samsung 3 nm GAA Milestone
Samsung's industry-first initial commercial foundry production of 3 nm Gate-All-Around (GAA) technology, launched in 2022.
Yield Engineering
An engineering discipline focused on using fabrication data to diagnose process variation, trace defect sources, and improve the proportion of acceptable dies.
Fab Engineering
An engineering discipline focused on hands-on optimization of thin-film deposition, chemical-mechanical planarization (CMP), process equipment, and wafer processing consistency.
CHE 323 Subject Scope
A chemical engineering course covering semiconductor devices and fabrication unit processes, including oxidation, lithography, deposition, etch, and ion implantation.
Yield
The fraction or percentage of fabricated dies or devices on a wafer that successfully meet all operational and acceptance specifications.
X-bar Chart
A statistical process control chart used to detect and monitor shifts or trends in subgroup means over time.
R Chart
A statistical process control chart used to evaluate within-subgroup variability by tracking subgroup ranges.
Process Capability Ratio (Cp)
A potential capability metric calculated as Cp=6σUSL−LSL, representing the maximum potential capability of a process if it were perfectly centered between specification limits.
Process Capability Index (Cpk)
A process capability metric calculated as Cpk=min[3σUSL−μ,3σμ−LSL], measuring actual performance while accounting for process centering relative to specification limits.
Control Limits vs. Specifications
Control limits describe natural, observed statistical variation calculated from process data, whereas specifications are externally defined limits representing engineering acceptance criteria.
Statistically Stable vs. Capable
A statistically stable process is predictable and free of assignable causes, whereas a capable process consistently produces product within established specification limits.
Wafer Map
A visual mapping of test results across a wafer that highlights spatial clusters and geometric patterns of failing dies to help determine defect root causes.
Falling Yield Investigation Procedure
A root-cause protocol that segments yield data by lot, tool, or time, inspects wafer maps and SPC charts, tests hypotheses, and verifies corrective actions.
Random-Defect Yield Model
A simple yield equation expressed as Y≈exp(−AD0), where A is the active die area and D0 is the random defect density.
Design of Experiments (DOE)
A systematic methodology that simultaneously varies experimental factors to identify their primary effects, interactions, and optimal operating conditions.
Semiconductor Wafer
A thin, circular slice of single-crystal semiconductor material upon which integrated circuits are fabricated through repeated processing steps.
FEOL (Front-End-of-Line)
The initial phase of integrated circuit fabrication where active semiconductor devices, such as transistors, are directly patterned and formed in the substrate.
BEOL (Back-End-of-Line)
The secondary phase of integrated circuit fabrication where metallic interconnect wiring, dielectric insulation, and vias are fabricated to connect devices.
CMOS
Complementary Metal-Oxide-Semiconductor technology, which pairs n-channel (NMOS) and p-channel (PMOS) field-effect transistors to achieve low static power consumption.
Silicon Doping
The process of introducing trace donor or acceptor impurity atoms into high-purity silicon to control and tailor its electrical conductivity.
n-type vs. p-type Silicon
In n-type semiconductors, electrons act as majority carriers, whereas in p-type semiconductors, electron vacancies (holes) act as majority carriers.
Photolithography
The optical process of transferring circuit patterns from a photomask onto a light-sensitive polymer photoresist coating on the wafer surface.
DUV vs. EUV Wavelengths
Deep Ultraviolet (DUV) lithography commonly uses wavelengths of 193nm or 248nm, whereas Extreme Ultraviolet (EUV) lithography operates at 13.5nm.
Lithography Resolution Relation
The optical limit equation R=NAk1λ, which indicates that smaller feature size (R) requires shorter wavelength (λ) and higher numerical aperture (NA).
EUV Reflective Optics and Vacuum
Because 13.5nm light is strongly absorbed by atmospheric gases and standard refractive glass, EUV lithography systems operate under vacuum and utilize multi-layer reflective mirrors.
EUV Light Generation
A process where high-energy laser pulses strike microscopic molten tin droplets, ionizing them into high-temperature plasma that emits radiation at 13.5nm.
Thermal Oxidation
A high-temperature thermal process that reacts silicon substrates with oxygen gas or steam to grow insulating silicon dioxide (SiO2) films.
Wet vs. Dry Oxidation
Wet oxidation uses steam to achieve rapid film growth rates, whereas dry oxidation uses pure oxygen gas to produce higher-density, higher-electrical-quality oxide layers.
Chemical Vapor Deposition (CVD)
A deposition method where vapor-phase precursor chemicals react or decompose on a heated substrate surface to deposit solid thin films.
Physical Vapor Deposition (PVD)
A thin-film deposition technique in which solid source materials are physically vaporized or sputtered in a vacuum chamber and condense onto the wafer surface.
Atomic Layer Deposition (ALD)
A vapor-phase deposition process based on sequential, self-limiting chemical reactions that deposit highly conformal and uniform thin films one atomic layer per cycle.
Wet Etching vs. Plasma Dry Etching
Wet etching relies on liquid chemicals and is generally isotropic, whereas plasma dry etching uses reactive ions and radicals to achieve anisotropic, directional vertical profiles.
Etch Selectivity
The ratio comparing the etch rate of the target film material to the etch rate of the underlying substrate or masking layer.
Ion Implantation
A low-temperature doping technique that accelerates ionized dopant atoms through an electric field to embed them at precise depths within a substrate.
Post-Implantation Anneal
A thermal heating process used after ion implantation to recrystallize damaged crystal lattice structures and electrically activate implanted dopant atoms.
Chemical-Mechanical Planarization (CMP)
A polishing process combining chemical slurry etching and mechanical abrasion to achieve global surface planarization on wafer layers.
Gate-All-Around (GAA)
An advanced transistor architecture where the gate material completely surrounds the conducting channel on all sides, providing superior electrostatic channel control.
GAA vs. FinFET
FinFET gates wrap around three sides of a vertical fin channel, whereas GAA gates enclose all sides of horizontal nanosheet channels.
Short-Channel Effects
Parasitic physical effects occurring when channel lengths shrink, causing the gate to lose electrostatic control over current flow and increasing off-state leakage current.
Stacked GAA
A transistor configuration consisting of multiple vertically stacked nanosheet channels, each entirely surrounded by gate dielectric and metal.
Thermal Budget
The cumulative thermal energy (time-temperature profile) delivered to a wafer during fabrication, which must be constrained to prevent excessive dopant diffusion.
Vias
Vertical conductive interconnect plugs etched through insulating dielectric layers to electrically connect different horizontal metal routing levels.
Low-k Dielectrics
Insulating materials possessing a lower dielectric constant (k) than silicon dioxide, integrated into BEOL layers to reduce parasitic capacitance and RC signal delay.
Damascene Process
A copper patterning method in which trenches are etched into a dielectric, filled with copper metal, and planarized back using CMP.
Backside Power Delivery
An advanced architecture that shifts the power distribution network to the rear surface of the wafer, freeing frontside BEOL wiring density for signal lines.