1/80
Looks like no tags are added yet.
Bond potential energy curve: what happens when atoms are very close?
Nucleus–nucleus repulsion dominates → potential energy rises steeply (destabilisation).
Bond potential energy curve: what happens when atoms are very far apart?
They do not interact → potential energy ≈ 0.
Bond length vs bond dissociation energy on the potential energy curve
Bond length = internuclear distance at the energy minimum (attraction balances repulsion). Bond dissociation energy = depth of the well, i.e. energy needed to separate the atoms to infinity.
Name the 3 types of primary (chemical) bond
Ionic, covalent, metallic. All involve valence electrons, as atoms try to reach a stable electron configuration (octet).
Ionic bonding: who bonds and what happens to electrons?
Between metals and non-metals. The metal gives up its valence electrons to the non-metal → cation + anion, all atoms reach an octet (e.g. Na⁺Cl⁻).
Define electronegativity
A measure of how strongly an atom attracts the shared electrons in a covalent bond. (NOT electron affinity, NOT ionisation energy, NOT number of electrons shared.)
Electronegativity spectrum: equal pull / unequal pull / extremely unequal pull
Equal pull = nonpolar covalent (H–H). Unequal pull = polar covalent (δ⁺H–Fδ⁻). Extremely unequal pull = electron(s) transfer completely = ionic (Na⁺Cl⁻).
Electronegativity trend ACROSS a period (left → right) and WHY
INCREASES. More protons pulling on the same shell → stronger pull on shared electrons.
Electronegativity trend DOWN a group and WHY
DECREASES. Valence electrons are further from the nucleus and more shielded → weaker pull on shared electrons.
Most electronegative element and the trend direction on the periodic table
Fluorine (4.0). Electronegativity increases towards the top-right (excluding noble gases).
Electronegativity values to remember
H 2.1 • C 2.5 • N 3.0 • O 3.5 • F 4.0 • Cl 3.0 • Br 2.8 • S 2.5 • P 2.1 • B 2.0 • Na 0.9
Which is the most polar: O–H, N–H, C–H or C–C?
O–H (ΔEN = 3.5 − 2.1 = 1.4). N–H = 0.9, C–H = 0.4, C–C = 0 (nonpolar).
Why is the O–H bond in methanol polar covalent?
O is more electronegative than H, so the shared pair sits closer to O → O gets δ⁻, H gets δ⁺. (Electrons are shared, not transferred.)
Lewis model / octet rule
Covalent bonding is explained by atoms sharing electrons to achieve the electron configuration of the nearest noble gas (8 valence electrons; H gets 2).
Lewis structure procedure (5 steps)
1) Add up all valence electrons (adjust for charge). 2) Put the LEAST electronegative atom in the centre (never H). 3) Put 2 electrons between atoms to form bonds. 4) Complete octets on the outer atoms. 5) Move lone pairs in to form double/triple bonds if the central atom lacks an octet.
Valence electron count for an anion vs cation
Anion: ADD one electron per negative charge. Cation: SUBTRACT one electron per positive charge. E.g. PO₄³⁻ = 5 + (4×6) + 3 = 32.
Which atom goes in the centre of COCl₂ (phosgene)?
Carbon – it is the least electronegative atom (C 2.5 vs O 3.5, Cl 3.0).
Formal charge formula
FC = (valence electrons in free atom) − (number of bonds to the atom) − (number of unshared/lone-pair electrons).
Which Lewis structure is most likely when several are possible?
The one with the LOWEST formal charges (ideally zero on every atom), with any negative charge on the more electronegative atom.
CO₂: O=C=O vs O≡C–O – which is better and why?
O=C=O – all atoms have formal charge 0. The alternative gives charges (e.g. −2 / +2) – not favoured, even though both obey the octet rule.
Why do we need resonance?
A single Lewis structure is often an inadequate description: it suggests bonds of different length/type (single vs double) when experiment shows they are identical.
Resonance structures: what is the same and what differs?
SAME: arrangement of atoms (and total valence electrons). DIFFERENT: only the position of electrons (double bonds and lone pairs). Linked by a double-headed arrow ↔.
Resonance hybrid
The actual structure = a blend/average of all feasible Lewis structures. It is a blending, NOT a flickering back-and-forth between two states.
Energy of a resonance hybrid
LOWER than any single contributing resonance structure (resonance stabilises the molecule).
Ozone (O₃): number of valence electrons and structure
18 valence electrons. O=O–O ↔ O–O=O (2 resonance structures). Central O has a lone pair and formal charge +1; the single-bonded terminal O has −1.
Ozone bond lengths
Both O–O bonds are identical, 129 pm – intermediate between a typical O–O single bond (148 pm) and O=O double bond (121 pm). Bond order 1.5.
Species that need resonance structures
O₃, NO₂⁻, NO₃⁻, CO₃²⁻, benzene (C₆H₆). NOT NH₃, H₂O or CH₄ (only one Lewis structure each).
Why Lewis structures are not enough
They show connectivity and electron count but NOT 3D shape. E.g. BF₄⁻ looks flat on paper but is tetrahedral; PF₃ looks trigonal planar but is trigonal pyramidal.
VSEPR theory – core idea
Regions of electron density (bonding pairs, lone pairs, and each multiple bond counts as ONE region) around the central atom arrange themselves as far apart as possible to minimise repulsion.
Region of electron density: what counts?
Each single, double or triple bond = 1 region; each lone pair = 1 region. (HCN's C≡N triple bond is a single region.)
How is the molecular SHAPE named?
By the arrangement of ATOMS only – not by the arrangement of electron regions. Lone pairs occupy a site but are not part of the named shape.
VSEPR 2-step method
1) Draw the Lewis structure, count regions on the central atom → basic arrangement. 2) Remove lone-pair sites from the description → molecular shape (then adjust angles for lone-pair repulsion).
Order of repulsion strength in VSEPR
Lone pair/lone pair > lone pair/bonding pair > bonding pair/bonding pair. Lone pairs squeeze bond angles.
Why is H–N–H in NH₃ (≈107°) smaller than H–C–H in CH₄ (109.5°)?
The lone pair on N repels the bonding pairs more strongly than bonding pairs repel each other, squeezing the H–N–H angle.
Do heteronuclear diatomic molecules have a dipole moment?
YES, always (HCl, HF, CO), because of the electronegativity difference. Homonuclear diatomics (N₂, O₂, H₂, Cl₂) have none.
Define a polar molecule
Any molecule with a non-zero net dipole moment.
Can a molecule with polar bonds be nonpolar?
Yes – in polyatomic molecules bond dipoles are vectors and can cancel if the shape is symmetric (e.g. CO₂, BF₃, CCl₄).
Polar or nonpolar: CO₂, BF₃, CCl₄
NONPOLAR – symmetric shapes (linear, trigonal planar, tetrahedral) so the bond dipoles cancel.
Polar or nonpolar: H₂O, NH₃, CHCl₃
POLAR – bent / trigonal pyramidal / distorted tetrahedron: bond dipoles do not cancel.
Why is CHCl₃ polar but CCl₄ nonpolar?
CCl₄: four identical C–Cl dipoles cancel in a symmetric tetrahedron. CHCl₃: one C–Cl replaced by C–H, so the dipoles are unequal and don't cancel. (Likewise CH₃Br-type molecules have a small net dipole.)
Why is water polar but CO₂ not (both have polar bonds)?
CO₂ is linear so the two C=O dipoles point opposite and cancel. H₂O is bent so the two O–H dipoles add to a net dipole pointing towards O.
Which diatomic has NO dipole moment: HCl, N₂, HF or CO?
N₂ – both atoms identical, so no electronegativity difference.
London dispersion forces
Act between ALL molecules (Ne, H₂, CH₄). Temporary induced dipoles. The only force between nonpolar molecules; strength increases with molar mass/size.
Dipole–dipole forces
Between polar molecules (e.g. HCl): δ⁺ end of one molecule attracts δ⁻ end of another.
Dipole–induced dipole forces
Between a polar molecule and any other molecule (polar or not), e.g. HCl and Cl₂. The polar molecule distorts the electron cloud of its neighbour.
Ion–dipole forces
Between an ion and a polar molecule, e.g. a metal ion dissolved in water.
Hydrogen bond: requirements
H bonded to O, N or F, interacting with a lone pair on another O, N or F. The H forms a link between the two electronegative atoms (H₂O, NH₃, ethanol). Strongest of the intermolecular forces.
Strongest intermolecular force in CH₄, HCl, CH₃OH
CH₄: London dispersion • HCl: dipole–dipole • CH₃OH: hydrogen bonding.
Why does ethanol mix with water but ethane doesn't?
Ethanol's O–H can hydrogen bond with water. Ethane is nonpolar and only has weak dispersion forces – no favourable interaction with water. (C–H bonds are NOT polar enough to matter.)
Boiling points: propane vs ethanal vs ethanol (all ~44–46 g/mol)
propane < ethanal < ethanol. Propane: dispersion only. Ethanal: dipole–dipole (C=O). Ethanol: hydrogen bonding (strongest). Similar molar mass → compare force type.
Why are functional groups important?
They largely determine a molecule's characteristic chemical reactions and physical properties, and they help us identify and characterise molecules (e.g. in IR, NMR). All organic molecules contain them.
R–OH
Alcohol (suffix -ol, e.g. ethanol).
R–O–R′
Ether (e.g. methoxyethane; CH₃OCH₃ is an ether).
R–CHO
Aldehyde (C=O with an H attached; suffix -al, e.g. ethanal CH₃CHO).
R–CO–R′
Ketone (C=O between two carbons; suffix -one, e.g. propanone CH₃COCH₃).
R–COOH
Carboxylic acid (suffix -oic acid, e.g. ethanoic acid CH₃COOH).
R–COO–R′
Ester (suffix -yl -oate, e.g. ethyl ethanoate).
R–NH₂
Amine (suffix -amine, e.g. methylamine – the simplest amine, CH₃NH₂).
R–CONH₂
Amide (suffix -amide, e.g. ethanamide).
R–C≡N
Nitrile (suffix -nitrile).
R–SH
Thiol (suffix -thiol, e.g. methanethiol).
R–X (X = halogen)
Haloalkane (prefix halo-, e.g. chloroethane).
R–CO–X
Acyl halide (e.g. ethanoyl chloride).
C=C / C≡C
Alkene (-ene, ethene) / alkyne (-yne, ethyne). Alkanes (-ane) contain only C–C single bonds.
Benzene ring on R
Arene (aromatic; -yl benzene). Needs resonance to describe bonding.
Which compound is the aldehyde: CH₃OCH₃, CH₃CHO, CH₃COOH, CH₃COCH₃?
CH₃CHO (ethanal). The others are ether, carboxylic acid and ketone respectively.
VSEPR: 2 regions of electron density
Basic arrangement = LINEAR. 0 lone pairs → LINEAR, 180° (e.g. BeF₂, CO₂, HCN).
VSEPR: 3 regions, 0 lone pairs
Basic arrangement = TRIGONAL PLANAR. Shape = TRIGONAL PLANAR, 120° (e.g. BF₃, BCl₃, NO₃⁻, CO₃²⁻).
VSEPR: 3 regions, 1 lone pair
Basic arrangement = trigonal planar. Shape = BENT / ANGULAR, angle slightly LESS than 120° because the lone pair repels more (e.g. O₃ ≈ 117°, SO₂ ≈ 119°).
VSEPR: 4 regions, 0 lone pairs
Basic arrangement = TETRAHEDRAL. Shape = TETRAHEDRAL, 109.5° (e.g. CH₄, BF₄⁻, CCl₄).
VSEPR: 4 regions, 1 lone pair
Basic arrangement = tetrahedral. Shape = TRIGONAL PYRAMIDAL, ≈107° (e.g. NH₃, PF₃, NF₃, SO₃²⁻).
VSEPR: 4 regions, 2 lone pairs
Basic arrangement = tetrahedral. Shape = NON-LINEAR / BENT / ANGULAR, ≈104.5° (e.g. H₂O, H₂S).
Why does the bond angle shrink from 109.5° → 107° → 104.5° (CH₄ → NH₃ → H₂O)?
Each lone pair repels bonding pairs MORE than bonding pairs repel each other (LP/LP > LP/BP > BP/BP), squeezing the bond angle. More lone pairs = smaller angle.
VSEPR: 5 regions, 0 lone pairs
Basic arrangement = TRIGONAL BIPYRAMIDAL. Shape = TRIGONAL BIPYRAMIDAL; angles 90° (axial–equatorial) and 120° (equatorial–equatorial), 180° axial–axial (e.g. PCl₅, PF₅).
VSEPR: 5 regions, 1 lone pair (extra – beyond lecture)
Basic arrangement = trigonal bipyramidal; lone pair sits EQUATORIAL. Shape = SEESAW (e.g. SF₄); angles < 90° and < 120°.
VSEPR: 5 regions, 2 lone pairs (extra – beyond lecture)
Basic arrangement = trigonal bipyramidal; both lone pairs equatorial. Shape = T-SHAPED (e.g. ClF₃); angle slightly < 90°.
VSEPR: 5 regions, 3 lone pairs (extra – beyond lecture)
Basic arrangement = trigonal bipyramidal; all three lone pairs equatorial. Shape = LINEAR, 180° (e.g. XeF₂).
Where do lone pairs go in a trigonal bipyramid?
In EQUATORIAL positions (120° neighbours) – this minimises lone-pair repulsion compared with axial positions (90° neighbours).
VSEPR: 6 regions, 0 lone pairs
Basic arrangement = OCTAHEDRAL. Shape = OCTAHEDRAL, all angles 90° (e.g. SF₆).
VSEPR: 6 regions, 1 lone pair
Basic arrangement = octahedral. Shape = SQUARE PYRAMIDAL, angles slightly < 90° (e.g. BrF₅).
VSEPR: 6 regions, 2 lone pairs
Basic arrangement = octahedral; lone pairs on opposite sides (180° apart). Shape = SQUARE PLANAR, 90° (e.g. XeF₄, ICl₄⁻).