1/30
What is a REDOX reaction
a reaction in which one or more elements change oxidation state
What is a disproportionation reaction
A reaction in which an element is both oxidised and reduced
What are the three general types of electrodes
Metal electrodes
Gas electrodes
Redox electrodes
Metal electrodes
Consist of a metal surrounded by a solution of its ions
Gas electrodes
For gas and a solution of its ions. An inert metal (usually platinum) is the electrode
Redox electrodes
For two different ions of the same element
Two types of ions are present in solution with an inert metal electrode (usually platinum) ito allow the flow of electrons
Electrochemical cell
When two half-cells are combined together.
Actual potential of a half cell is measured directly (It has to be connected to another half cell of known potential)
Why choose a standard hydrogen electrode (SHE)
SHE is the primary standard, it is the potential to which all others are compared and is therefore assigned the potential of 0
How to set up an electrochemical cell
Two half cells are joined together to give a complete circuit
The two metals are joined with a wire (Electrons flow through)
The two solutions are joined with a salt bridge (Ions flow through the salt bridge)
A voltmeter is included to allow the potential difference to be measured (emf)
What can a salt bridge be
A piece of filter paper soaked with a solution of unreactive ions or a tube containing unreactive ions in an agar gel
What compound is often used as a salt bridge
KNO3 (This is because K+ and NO3- ions are very unreactive)
What conditions are half cells measured under
Standard conditions:
1.0 mol dm-3
298 K
100 kPa (only affects half cells with gases)
Writing conventional cell notation
R | O || O | R
| = Phase boundary
|| = Salt bridge
R = Reduced
O = Oxidised
The species with the highest oxidation state are closer to the middle
The half cell with the more positive potential is set up as the right hand electrode
What is the exception to the order of cell notation
The Standard Hydrogen Electrode (SHE) always goes on the left hand side
Pt(s) | H2(g) | H+(aq) || Ni2+(aq) | Ni(s)
emf =
emf= Eocell = Eoright - Eoleft
emf (SHE)
Eocell = Eotest - EoSHE
Therefore
Eocell = Eotest
Secondary standard
a standard electrode that has been calibrated against the primary standard
Why would a secondary standard be used
SHE is difficult to use as it involves the use of a flammable gas
The secondary standard is easier to use
What is the electrochemical series
a list of electrode potentials in order of decreasing potential
Reducing power within the electrochemical series
as Eo/V decreases (+ → -) Reducing power increases
and vice versa
What are the types of commercial cells
Non-rechargeable cells
Rechargeable cells
Fuel cells
Examples of non-rechargeable cells
Zinc-carbon
Alkaline
Examples of non-rechargeable cells
Lithium Ion
Lead-acid
Nickel-cadmium
What is the most common type of fuel cell
Hydrogen-oxygen fuel cell
Information about Non-rechargeable cells
The chemicals in the cells are used up over time and the emf drops
Once one or more of the chemicals have been completely userd up the cell is flat and the emf is 0V
These cannot be recharged
Information about rechargeable cells
In these cells the reactions are reversible
They can be reversed by applying an external current and regenerate the chemicals
Information about fuel cells
They have a continuous supply of the chemicals into the cell
Neither run out of chemicals nor need recharging
Fuel cells are very efficient and only give off water as a waste product
Pros and cons of using cells
Pros:
Portable source of energy
Cons:
Waste issues
Pros and cons of using non-rechargeable cells
Pros:
Cheap
Cons:
Waste issues
Pros and cons of using rechargeable cells
Pros:
less waste
Cheaper in the long run
Lower environmental impact
Cons:
Some waste issues (At end of useful life)
Pros and cons of using hydrogen fuel cells
Pros:
Only waste product is water
Do not need re-charging
very efficient
Cons:
Need constant supply of fuels
Hydrogen is flammable and explosive
Hydrogen is usually made using fossil fuels
High cost of fuel cells
Difficult to transport