1/87
Looks like no tags are added yet.
analog systems
represents changing values as continuously variable physical quantities
similar to the brems emission from the anode
images recorded on radiographic fild are considers
analog
ditigal systems
divide the image into cells
each cell of information is a
pixel (picture element) that corresponds to the intensity of the x-ray beam that strikes a particulat area
dicrete values
represents the amount of radiation hitting each portion of the IR
similar to characteristic emission from the anode
includes CT, MR, US as well as CR and DR
in digital radiography the x rays form a store electronic image that is displayed as a
matrix of intensities
matrix
a series of boxes that gives form to the image
numeric info contained in each pixel is used to determine
the shade of gray or brightness level
numerical value assigned to the pixel is
directly proportional to the x-ray exposure to that area of the image receptor
what is pixel size measured in
microns (um)
1/1000 of a millimeter
attenuation coefficient
the ratio or percentage of original x ray beam intensity absorbed by a particular tissue area in the patient
voxels
volume elements
data acquired from 3 dimensional volumes of tissue within the patient
determines the attenuation coefficient
each pixel in a radiographic image represents what within the patient
a voxel within the patient
degree of beam attenuation of the voxel determines the?
numeric value of the pixel
CR and DR are both what?
both computed
both make digital images
CR
Computed radiography
cassette based imagining
tech uses a cassette to transfer the digital image to the processor
DR
Direct radiography
cassette-less system
image is transmitted directly to the processor without thecnologist intervention
Digital radiography
a form of radiography that uses x-ray sensitive plates to capture data during the patient examination, immediately transferring it to a computer system without the use of an intermediate cassette
synonyms: DR or flat panel systems or cassetteless
two general categories of DR systems
direct conversion
indirect conversion
what is direct conversion or capture
x rays are captured and converted straaight to electrical signal without any steps in between
direct use photoconductor
one type - TFT
what is indirect conversion or capture
converts x rays to light and light to electrical signal
all indirect detectors use scintillator and a photodiode
pixel =
picture element in the final image
voxel =
a volume element within the patient
a del (detector element) =
a hardware device for detecting radiation
it is part of the image receptro
typical size is about 100 microns (1/10th millimeter)
3 components of a DEL
semiconductor detector surface
microscopic storage capacitor
TFT (thin film transistor)
semiconductor detector surface
made of semiconductor material
collects the x rays or light and converts them to electrons
microscopic storage capacitor
allows the DEL to store electrical charge until it is read
TFT (thin film transistor)
acts as a switch (sometimes called a switching gate) that releases electrons when detector is “read”
semicondunctor detectors are built in?
layers
top, middle, and bottom
top layer of semiconductor detector
electrode
middle layer of semiconductor detector
the semiconductor detector element
bottom layer of semiconductor detector
another electrode that the TFTs connected to storage capacitors
the sensing process of semiconductor detectors
x rays absoption causes ionization within the detector material
voltage to the electrodes pull electrons and positive holes to opposite electrodes
lower electrode conducts the current to the capacitor for storage
semiconductor detectors are sensitive to
x rays (if made of amorphous selenium, a-Se)
directly converts ionization from x rays into electronic signal
light (if made of amophous silicon, a-Si:H)
converts light to electronic signal (indirect capture)
fill factor
the ratio of the sensing area of a DEL to the area of the DEL itself
detectors with high fill factors (large sensing areas) provide?
better spatial and contrast resolution
lower fill factors require an
increase in technique, increasing patient dose
capatictor
stores electronic charge
what is capacitor made of
2 conductive plates separated by dielectric insulating materials
how does a capactior work
when the charges created in the detector surface are sent to the capacitor the charges build up on one plate of the capacitor
the electric field attraction betwen the electrodes hold the electrons in place until the TFT releases them
Thin film transistors
in each DEL the TFT acts a a switching gate to release the built - up electrical charge when the del is “read out”
TFTs act like a switch with no moving parts
what happens under normal circumstances in TFT
the electrons trapped in the source (the capacitor) do not cross to the drain
what happens to the TFT when a voltage is applied to the gate lines
it creates a potential different between the source and the drain and electrons flow out of the capactior
active matrix array (AMA)
the grid DELs are arranged in
each del is connected to the learby dels by?
gate lines and data lines
address driver
controls the gate lines
which controls the order in which the dels are read out
when a voltage is applied to a gate line the TFT gates do what
open in sequence and dump their charge into a data line
this surge of charge flows to an amplifier, then to the analog to digital converter
direct detectors type
one type: flat panel TFT
converts x rays directly to electronic signal
what charge is applied to the top electrode
a negative charge
what charge is applied to the bottom electrode
a positive charge
what is between the electrodes
a photoconductor made of amophous selenium
what happens to the x rays exiting the patient
the x rays exit the patient and are absorbed by the amorphous selenium a-Se photo conductor
x ray absorption (both compton and photoelectrict) ionize the amorphous selenium, creating ion pairs
what happens to the ion pairs made
the ion pairs separate
the positive charges mitrate to the top (negative) electrode
negative charges migrate to the bottom (positive) electrode
what happens to the charges
positive charges return to the circuit
electrons are stored in the capactior
TFT releases electrons from the capactior
the address driver applies negative charge to the gate lines in a sequential pattern related to their position within the detector matrix
forcing stored electrons to exit that capacitor through the data lines
ADC
the charge flows through the analog to digital convertor (ADC)
the adc measures and numbers the charge and converts that information to binary code
ADC transmits the image data to the computer (CPU)
the computer processes the DEL values, assigns a shade of gray to each pixel and creates the image
Direct capture TFT system entire process:
before exposure, an electric field is applied through the bias electrode across the surface of the amorphous selenium layer
once exposure begins, x rays are absorbed by the amorphous selenium, creating ions (positive and negative electric charges). the ions created are in proportion to the x ray exposure received
under the influence of the electric field applied in step 1, the electrons migrate toward positive electrode and are stored in the capacitors
when the address driver applies voltage to the gate lines, the TFT switches release the charge from the capacitor
the charge is then amplified and sent to the analog to digital convertor (ADC) which measures and numbers the ccharge and sends the signal to the computer workstation for processing and display
all indirect capture DR systems use
scintillator
photodetectors
charge emiiter
thin film transistor (TFT array)
charge couple device (CCD)
complementary metal oxide semiconductor (CMOS)
what is a scintillator
a device made of crystal phosphors that exhibit the property of luminescence
luminescent materials
absorb energy from particles or photons and re-emit the absorbed energy as light
2 types: fluorescence and phosphorescence
fluorescence
glows as the interaction is occuring
phosphorescence
can emit light for some time after the interaction occurs
scintillator layers covers?
the photodetector and charge emitter
phosphors
crystalline powders that convert x rays into visible light and form the active component of the scintillator
phosphor crystals come in 2 shapes: turbid and columnar
Turbid phosphor
phosphor layer with a random distribution of phosphor crystals within the active layer
chemical make-up: gadolinium oxysulfide
emits light isotropically
reduces spatial resolution
cheaper to manufacture
columnar (needle) phosphor
crystals are manufactured as needles or columns
chemical make up: cesium iodide
needle crystals direct light uniformly downward to the photodetector
results in less light divergence and better spatial resolution
more expensive to manufacture
indirect detector types
flat panel TFT
charge-coupled device (CCD) or complementary metal oxide semiconductor (CMOS)
both need a scintillator to convert x rays to light
indirect capture TFT systems structure
a scintiallator plate
TFT array with each pixel containing a
contains an amorphous silicon photodetec or photodiode
indirect capture TFT systems function
a scintillator converts x ray photons into light
light interacts with a photoconductive material (typically amorphous silicon) to convert the light photons into electrons
the electrons migrate to thin film transistors and produce an electric signal
what charge is applied to top electrode
positive charge
what charge is applied to the bottom electrode
negative charge
what is between the electrodes
the photodiode is made of amorphous silicon
indirect capture TFT system entire process
before exposure, an electricfield is applied through the bias elecrode across the surface of the amorphous silicon layer in the TFT array
once exposure begins, x rays are absorbed by scintillator crystals. the electrons in the scintillator crystals become excited and lose energy as light (fluoresce) when the electrons return to their normal orbits. the light released is in proportion to the x ray exposure received
the light photons are absorbed by the amorphous silicon photodetector. in amorphous silicon, light photons have sufficient energy to ionize the atom, creating ion pairs. the ions created are in proportion to the light exposure, which, in turn, is proportional to x ray exposure received
under the influence of the electric field applied in step 1, the electrons migrate toward positive electrode and are stored in the capacitors
when the address driver applies voltage to the gate lines, the TFT switches release the charge from the capacitor
the charge is then amplified and sent to the analog to digital convertor which measures and numbers the charge and sends the signal to the computer workstation for processing and display
indirect capture CCD system structure
a scintillator place
light focusing optics
charged coupled device (CCD) or complementary metal oxide semiconductor (CMOS)
CCDs and CMOSs differ from TFTs in what
their representation of pixels
the DEL in a TFT array represents a single pixel
each CCD/CMOS chip contains millions of diodes that collect the imput for a single pixel
both CCD and CMOS are types of ?
integrated circuits - IC
light a computer circuit board
what is the IC in both
a silicon-based semiconductor that can asorb light photons
absorption of the light ionizes the atoms in the semiconductor
each IC panel is made of…?
millions of tiny diodes
electrons produced by ionizations in the semiconductor are collected by the ?
closest diode
charge produced is proportional to?
the amount of light incident on the photodetector
CCD pros
has higher fill factor = more sensitive = lower patient dose
wider dynamic range = more sensitive to very low light levels = better @ low dose imaging
lower amount of noise
faster response time that TFTs
CCD cons
all peripheral components like timers and ADCs must be attached external to the sensor itself
this makes the chip larger
more expensive than CMOSs
CMOS uses?
integrated circuits, which allow many perhipheral circuits to be integrated inside of a single chip
this allows the voltage conversino, charge amplification and the analog-to-digital conversion to take place inside each pixel
CMOS pros
faster processing speed thanCCDs
uses less power
cheaper
responds to lower light levels than CCds = even lower pt. dose
CMOS cons
has lower fill factor = less sensitve = higher pt. dose
more noise in the image
separate amplifiers for each pixel leads to variations and non-unifomity across the image
how do scintillator type flat panel detectors obtain digital information?
x rays strike the scintillator crystal (Csl)
scintillator crystal releases light
light interacts with a photodetector (a-Si) releasing electrons
electrons migrate to capacitors where they are stored
address driver stimulates TFT switch
TFT switch opens allowing electrons to flow from DELs to the ADC
how do non-scintillator type flat panel detectors obtain digital information
x rays interacts with amorphous silicon photoconductor, releasing electrons
electrons migrate to capacitors where they are stored
address driver stimulates TFT switch
TFT switch opens allowing electrons to flow from DELs to the ADC
How do CCDs obtain digital information
x rays strike scintillator creating light
light bounces off mirror, through lens to the CCD
silicon layer in CCD converts light to electron
electonrs captured by CCD pixels and sent to ADC
ADC assigns numeric values based on the number of electrons caputred by that pixel