1/55
Looks like no tags are added yet.
Air Transport
• Any type of transport that moves through the air.
• Any vehicle that can sustain flight is part of the air transport industry.
• Main mode of international tourism.
Unbroken Journey
Rapidity
Expensive
Special Preparations
What are the 4 Characteristics of Air Transport?
Unbroken Journey
Air transport provides unbroken journey over land and sea. It is the fastest and quickest means of transport.
Rapidity
Air transport had the highest speed among all the modes of transport.
Expensive
There is huge investment in purchasing aero planes and constructing of aerodromes.
Special Preparations
Air transport requires special preparations like wheelers links, meteorological stations, flood lights, searchlights etc.
High Speed
Comfortable and Quick Services
No Investment in Construction of Track
No Physical Barriers
Easy Access
Emergency Services
Quick Clearance
Most Suitable for Carrying Light Goods of High Value
National Defense
Space Exploration
10 Advantages of Air Transport
Very Costly
Small Carrying Capacity
Uncertain and Unreliable
Breakdowns and Accidents
Large Investment
Specialized Skill
Unsuitable for Cheap and Bulky Goods
Legal Restrictions
8 Disadvantages of Air Transport
Aviation
• A general term that originated from the French word “avi” meaning bird.
• Design, development, production, operation, and use of aircraft, especially heavier-than-air aircraft.
Bird
What is the meaning “Avi” from the French word?
General Aviation
all civil aviation operations other than scheduled air services and non-scheduled air transport operations for renumeration or hire.
Commercial Aviation
can be differentiated as activities than involve flying for business, renumeration or hire.
Military Aviation
involves using military aircraft and other flying machines.
1st Hot Air Balloon
2nd Hot Air Balloon
Airship / Blimps
History of Aviation: Lighter than Air Aircraft Development
November 1783
When was the 1st Hot Air Balloon Launch
April 4, 1909
When was the 2nd Hot Air Balloon Launch
1852/1900
When was the Airship/Blimps Launch
Unmanned Glider
Manned Glider
Jet Age
Concorde
History of Aviation: Heavier than Air Aircraft Development
1853
When was Unmanned Glider Launch
1902
When was Manned Glider Launch
1945-1960
When was Jet Age Launch
1973
When was Concorde Launch
James C. Mars (February 27, 1911)
He was an American aviator who flew his red biplane approximately 10 miles outside Manila. This became the first recorded cross-country flight in the Philippines, marking an important milestone in Philippine aviation.
Gagaban (February 12, 1912)
He was an Igorot chieftain who became the first Filipino airplane passenger. He flew with American pilot Lee Hammond over Luneta Park aboard a Red Devil biplane.
Cora Wong (April 11, 1914)
She was a nurse at the Chinese General Hospital who won a popularity contest, with the prize being an airplane ride with pilot Tom Gunn. She became the first woman passenger in Philippine aviation history.
Rosario Reyes (April 12, 1914)
She became the first Filipino woman to fly as an international passenger. She accompanied pilot Tom Gunn on a flight from the Philippines to Guam, showing the development of air travel beyond the country.
Philippine Airways Service, Inc. (PASI)
It was established in 1919 by Major Joseph Stevenot and Alfred J. Croft to operate commercial airmail services between Manila, Cebu, and Iloilo. It represented an early effort to establish commercial aviation in the Philippines.
Acrobatic Airplanes
Commuter Airplanes
Experimental Airplanes
Light Sport Aircraft
Limited Airplanes
Normal Aircraft
Primary Airplanes
Restricted Airplanes
Transport Airplanes
Utility Airplanes
What are the 10 Categories of Aircraft?
Acrobatic Airplanes
• These are airplanes not restricted by flight maneuvers.
• They have maximum of passenger seats and do not weigh more than 12,500 pounds or approximately 5,700 kilograms
• The flexibility of in-flight maneuvers allows these aircraft to perform aerobatics or special stunts.
Commuter Airplanes
• Limited to have 19 or fewer passengers and weigh no more than 19,000 pounds or 8,618 kilograms.
• They are multi-engine and propeller-driven.
• Typically used for short- distance travel to and from small airports with short runways.
Experimental Airplanes
• These aircraft may not have been full proven in flight, hence the name experimental
• They are sometimes unmanned or used for light sport.
• These aircraft are typically used for research and development, crew training, exhibitions, air racing, or surveys.
Light Sport Aircraft
• Some classify two-seat ultralight-type aircraft, powered parachutes, antiques, and classics airplanes, the composite aircraft as LSA.
• According to an article from EAA Airventure, getting a sport aircraft certificate is half the time faster and the regular pilot license.
Limited Airplanes
• Airplanes categorized as limited are either modified or converted military aircraft, which is currently being used for civilian purposes.
• The Federal Aviation Authority (FAA) has issued an order to restrict the use of limited airplanes for commercial purposes.
Normal Aircraft
• Airplanes categorized as normal airplanes have the same size as acrobatic planes, that is having a maximum weight of 12,500 pounds and nine or fewer passenger seats.
• The difference lies in the fact that they have approval for acrobatic flights.
Primary Airplanes
• Given special airworthiness certificates.
• On the technical side, they have three or fewer seats and are typically unpressurized, as explained in What are the Regulatory Categories of Aircraft Defined by the FAA.
Restricted Airplanes
These are used for agriculture and other services such as surveying, weather control, and forest services.
Transport Airplanes
• Transport airplanes are yet another category or airplanes.
• It has piston-engine, greater than 19 seats and a maximum takeoff weight of more than 19,000 pounds.
Utility Airplanes
• These planes can also be used for aerobatics. These aircraft have a maximum of nine passengers plus pilot seats. The take-off weight should not be more than 12,500 pounds.
Point to point Network
Hub and Spoke
2 Categories of Network Model?
Point-to-point Network
• Airlines focus on operating flights between the origin city to the destination. It is typically a non stop flight and is often a direct flight as well.
• Airlines who operate the _____________ limit their responsibility of bringing passengers to the arrival city of the flight. If the passengers have a different final destination, it will be another point-to-point leg.
Hub-and-Spoke
• Airlines use the larger and busier airports as their hub. The consolidation of the passengers gives the airlines better loads for each major flights. Airlines use their bigger planes from their hub to more popular destinations.
• Both legs will have a higher load, which will make their operation more efficient and cost effective. The spokes are also known as feeder flights.
International Air Transport Association (IATA)
International Civil Aviation Organization (ICAO)
Air Transport Association (ATA)
Flight Safety Foundation (FSA)
General Aviation Manufacturers Association (GAMA)
Society of Experimental Test Pilots (SETP)
What are the 6 International Regulatory Bodies?
International Air Transport Association (IATA)
A group organized by 57 international airlines in 1945, and by 2020, it has 290 member airlines and cargo agencies. They have regulatory functions over their members mostly focused on rates and charges of airline passengers.
International Civil Aviation Organization (ICAO)
It is a United Nations specialized agency concerned with the safe and orderly flow of international aviation, established by UN member states in 1944. They have 193 member states as of 2020.
Chicago Convention
ICAO also known as?
International Civil Aviation Organization (ICAO)
Created to govern the Convention on International Civil Aviation also known as Chicago Convention.
Air Transport Association (ATA)
The premier trade group of the principal U.S. airlines. ATA airline members and their affiliates transport more than 90% of U.S. airline passenger and cargo traffic.
Flight Safety Foundation (FSA)
An independent, nonprofit, international organization engaged in research, auditing education, advocacy and publishing to improve aviation safety.
General Aviation Manufacturers Association (GAMA)
A national trade association representing 55 manufacturers of fixed-wing aircraft, engines, avionics, and components. In addition to building nearly all the general aviation aircraft flying in the United States.
Society of Experimental Test Pilots (SETP)
An international organization that seeks to promote air safety and contributes to aeronautical advancement by promoting sound aeronautical design and development; interchanging ideas, thoughts and suggestions of the members, assisting in the professional development of experimental pilots, and providing scholarships and aid to members and the families of deceased members.
Civil Aeronautics Board (CAB)
Civil Aviation Authority of the Philippines (CAAP)
Office for Transportation Security (OTS)
Department of Transportation (DOTr)
What are the 4 Philippine Regulatory Bodies?
Civil Aeronautics Board (CAB)
Ensure the economic well being of the air transportation in the country. Ensure that domestic airlines offer fairly priced airfare. It also sees to it that competition among the carriers is fair.
Civil Aviation Authority of the Philippines (CAAP)
⚬ Tasked to secure the technical and operational aspects of the airline industry. Republic Act 9497 stated six mandates including maintenance of airports (except MNL, CEB, CRK).
⚬ Ensure the safety of air travel in the Philippines.
Office for Transportation Security
Oversees security screening operations at airports and terminals, manages security personnel, audits transport security measures, and issues official Transportation Security Regulations.
Department of Transportation (DOTr)
The national department responsible for the transportation sector, with CAAP and CAB among its attached agencies. It provides sector-level policy and administrative oversight rather than serving as the specialized aviation safety regulator.
Federal Aviation Authority (FAA)
It is the government agency of the United States responsible for regulating and overseeing civil aviation.