1/27
Looks like no tags are added yet.
gaseous, carrier gas
In GC, the analyte is transported through the column by ___ mobile phase, called the ____ ____.
nonvolatile liquid
In gas-liquid partition chromatography, the stationary phase is a ____ ___ that is bonded to the inside of the column.
solid
In gas-solid chromatography, the stationary phase is a ___ and the analyte molecules adsorb directly onto the surface.

.
Draw the basic setup of a gas chromatography machine.
capillary column
In most GCs, the column is a narrow open tubular column called a ___ ___.
open tubular
____ ____ columns provide a higher resolution, shorter analysis time, and greater sensitivity than packed columns.
wall-coated open tubular column (WCOT)
What is this open tubular column type?

support-coated open tubular column (SCOT)
What is this open tubular column type?

porous-layer open tubular column (PLOT)
What is this open tubular column type?

chromatogram
The ____ is a graph showing the detector response as a function of elution time.
retention time (tr)
The ____ for each component is the time between injection and detection of that component.
minimum retention time (tm)
The ___ is the minimum time required for solvent to travel the length of the column.
adjusted retention time (tr’)
The ___ is the additional time required to elute a solute beyond the time required by the solvent. The amount of time that the solute is not moving down the column.
relative retention (separation factor)
The ____ is the ratio of components 1 and 2 in their adjusted retention times.
doesn’t
Relative retention generally ____ change when the flow rate is changed.
retention factor (k)
The ___ of a component is the adjusted retention time for that component expressed in multiples of the time required for the mobile phase to travel the column.
2-10
The desired retention factor is between ___.
increases
When you decrease the column diameter, the retention time ____.
increases
When you increase the column length, the chromatogram resolution _____.
decreases
decreasing the stationary phase thickness ____ the retention time and sample capacity.
bleeding
At higher operating temperatures, the stationary phase can decompose causing ____ which increases background signal.
oxidation
____ of the stationary phase must be avoided.
helium
Most common carrier gas.
helium, nitrogen gas, and hydrogen gas
Examples of carrier gases.
lighter gas
Helium and hydrogen has provide better resolution than nitrogen gas because the solutes diffuse more rapidly through…
temperature
Nonpolar stationary phases are affected by ____ where polar stationary phases are not.
boiling point
For nonpolar stationary phases, the compounds are eluted largely in the order of increasing _____.
hydrogen bonding and dipole dipole interaction
In polar stationary phases, the compound retention is strongly determined by…