1/39
Looks like no tags are added yet.
They are the particles that are always Helium-4 Nuclei.
Alpha Particles
It is the process by which two light atomic nuclei combine to form a single heavier one while releasing massive amounts of energy.
Nuclear Fusion
Who first discovered natural evidence of radioactivity?
Henry Antoine Becquerel
Which scientist worked together with Marie Curie in isolating polonium and radium?
Pierre Curie
Which type of radioactive decay is characterized by the conversion of a proton into a neutron, emitting a positron and an electron neutrino?
Beta plus decay
What are the two main advantages of nuclear fusion?
Its fuels are cheap and almost inexhaustible, and it produces little radioactive waste.
All atomic nuclei contain both protons and neutrons as fundamental particles, except for which of the following?
Ordinary Hydrogen (¹₁H)
These are the magic numbers or numbers of neutrons and protons that make complete shells in the nucleus.
(2, 8, 20, 28, 50, 82, and 126)
Which of the following describes artificial nuclear transmutation?
The bombardment of stable nuclei with particles to change their nuclear structure.
Why does nuclear fission release a large amount of energy?
The heavy parent nucleus is less stable than the products it creates.
A refinery receives crude petroleum and needs to separate it into gasoline, kerosene, and diesel without changing the chemical structures of the hydrocarbons. Which process should be performed?
Distillation, because it separates petroleum fractions based on differences in their boiling points through heating and condensation.
An engineer observes that a liquid fuel flows poorly through pipes, especially when the temperature decreases. Which property should be investigated first to understand its resistance to flow?
Viscosity
An industrial facility prefers a fuel that produces no ash or clinker, requires relatively little excess air for complete combustion, and can be transported through pipelines. Which fuel category BEST satisfies these requirements?
Gaseous Fuels
A fuel is produced by passing steam over red-hot coke or coal. It contains approximately 40% hydrogen, 40% carbon monoxide, and 10–15% carbon dioxide and nitrogen. It is also called blue gas. Which fuel is described?
Water gas
Which statement BEST distinguishes cracking from reforming in petroleum refining?
Cracking breaks large hydrocarbon molecules into smaller ones, while reforming restructures low-octane hydrocarbons into higher-octane components.
It is a solid, black or brownish-black, found in seams or layers.
Fuel
It is the process of breaking down large, heavy hydrocarbon molecules from crude oil into smaller, lighter, and more valuable fractions, such as gasoline and jet fuel, using heat, pressure, and catalysts.
Cracking
It is the most widely used liquid fuel because it’s cheap, always available, burns clean and knock resistant.
Petrol
It is mainly Propane (C₃H₈) and Butane (C₄H₁₀) And also stored under moderate pressure as liquid.
LPG
Which of the following is not an example of gaseous fuel?
Petroleum
Which best describes a crystal?
A solid with highly ordered and repeating atomic patterns
The study of crystals, including their appearance, internal structure, and atomic arrangement.
Crystallography
A crystal has a mass of 54 g and a density of 6 g/cm³. What is its volume?
9 cm³
A solid material exhibits no long-range periodic arrangement of particles, softens gradually over a temperature range, and shows nearly identical physical properties regardless of the direction in which it is measured. Which combination of properties best explains its classification?
Short-range order, gradual softening, and isotropy
A crystal has three crystallographic axes. All three axes have equal lengths and meet at 90° angles. What crystal system does it belong to?
Cubic/Isometric
What is the term for the smallest repeating building block that reproduces a crystal lattice?
Metallic crystals
What is the main difference between crystalline and amorphous solids?
Crystalline solids have long-range order, while amorphous solids do not.
Which of the following is an example of a covalent-network crystal known for its exceptional hardness?
Diamond
All of the following are types of crystal defects mentioned in the report EXCEPT:
Sublimation
Which property allows a metal to be hammered or pressed into thin sheets without breaking?
Malleability
Which statement correctly defines an alloy?
A substance composed of two or more chemical elements, at least one of which is a metal
Why are highly reactive metals rarely found in their native state?
They readily combine with other elements to form compounds.
Why are many metal ores found in the form of oxides?
Oxygen is abundant and highly reactive.
Which process involves pulling metal through a die to produce wires or rods?
Drawing
A mining company discovers an ore containing a valuable metal. Before the metal can be used for manufacturing vehicles, machinery, and electronics, it must undergo extraction, purification, and processing. What field is responsible for these activities?
Metallurgy
A manufacturer needs to extract a highly reactive metal that cannot easily be reduced through heat alone. It decides to use electrical energy to obtain the metal. Which branch is most appropriate?
Electrometallurgy
A student wants to understand how electrons are arranged in energy bands and how their arrangement explains the electrical behavior of metals. Which concept should the student study?
Band Theory
This is a step in metal extraction where the metal oxide is reduced to the free metal using a reducing agent
Reduction
Analyze each theory and identify whether it is true or false.
I. Valence band contains electrons that have already gained enough energy to enter the conduction band, while the conduction band contains electrons that have not yet gained sufficient energy to move freely.
II. Copper is a good conductors of electricity because the valence band and conduction band are separated by a large forbidden energy gap.
Both statements are false.