International Business Strategy and Market Entry

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/40

flashcard set

Earn XP

Description and Tags

Comprehensive practice flashcards reviewing the concepts of international business strategy, global value creation, strategic positioning, cost versus local responsiveness pressures, and foreign market entry decisions based on Chapters 12 and 13.

41 Terms

1
New cards

How does the transcript define strategy, and what are the two levers managers use to increase enterprise value?

Strategy refers to the actions taken by managers to attain the goals of the firm. The two levers to increase enterprise value are:

  1. Raise profitability: lower costs or add value so the firm can charge more.
  2. Grow profits: sell more in existing markets or enter new markets.
2
New cards

What is the difference between profitability and profit growth?

Profitability is the rate of return the firm makes on its invested capital, whereas profit growth is the percentage increase in net profits over time.

3
New cards
<p>In this value creation framework, what do $$V$$, $$P$$, and $$C$$ represent, and how are value created, profit per unit, and consumer surplus calculated?</p>

In this value creation framework, what do VV, PP, and CC represent, and how are value created, profit per unit, and consumer surplus calculated?

  • VV: Value of the product to an average consumer.
  • PP: Price per unit (set by competitive pressures).
  • CC: Cost of production per unit (including cost of capital).
  • Value created per unit = V−CV - C
  • Profit per unit sold = P−CP - C
  • Consumer surplus per unit = V−PV - P
4
New cards

What are the two basic strategies identified by Michael Porter for creating value?

  1. Differentiation: Focus on increasing the attractiveness of the product (raising VV) to charge a premium price (e.g., Four Seasons luxury service).
  2. Low Cost: Focus on lowering production costs (lowering CC) to achieve profit through efficiency and volume (e.g., JinJiang's 7 Days Inns budget hotels).
5
New cards
<p>Based on this efficiency frontier diagram for the international hotel industry, what does the efficiency frontier represent, and why is JinJiang located inside the curve?</p>

Based on this efficiency frontier diagram for the international hotel industry, what does the efficiency frontier represent, and why is JinJiang located inside the curve?

The efficiency frontier represents all the positions a firm can adopt that maximize value (VV) for a given cost (CC). JinJiang is positioned inside the frontier because it represents budget hotels that have not yet maximized their operational efficiency and can still gain further efficiency.

6
New cards

What three things must a firm do to maximize its profitability?

  1. Pick a viable position: Choose a spot on the efficiency frontier with enough demand to support it.
  2. Configure operations: Set up manufacturing, marketing, logistics, IS, HR, etc., to support that position.
  3. Organize to execute: Put the right organizational structure in place to execute the strategy.
7
New cards
<p>In this value chain diagram, what are the primary activities and support activities of a firm?</p>

In this value chain diagram, what are the primary activities and support activities of a firm?

  • Primary activities (the design, creation, and delivery of the product; its marketing; and after-sale service): R&D, Production, Marketing & Sales, Customer Service.
  • Support activities (provide inputs allowing primary activities to occur): Information Systems, Company Infrastructure, Logistics, Human Resources.
8
New cards

What are the four ways firms can profit and grow by expanding internationally?

  1. Expand the market by selling domestic product offerings internationally.
  2. Realize location economies by dispersing value creation activities to optimal locations.
  3. Realize experience effects by serving an expanded global market from a central location.
  4. Leverage subsidiary skills by transferring valuable skills developed abroad throughout the global network.
9
New cards

What is a core competence, and what are examples mentioned for Toyota, IKEA, McDonald's, and P&G?

A core competence refers to skills within a firm that competitors cannot easily match or imitate. Examples include:

  • Toyota: Producing cars
  • IKEA: Stylish, affordable furniture design
  • McDonald's: Managing fast-food operations
  • P&G: Developing and marketing name brands
10
New cards

What are location economies, and what dual benefits do they provide?

Location economies are the cost advantages arising from performing a value creation activity in the optimal location for that activity anywhere in the world. They help:

  1. Lower the cost of value creation (↓C\downarrow C), supporting a low-cost position.
  2. Differentiate the product offering (↑V\uparrow V), supporting premium pricing.
11
New cards

What four major caveats or risks must firms weigh when making international location decisions?

  1. Political risk: Unrest, military turmoil, arbitrary government decisions, terrorism, and weak rule of law.
  2. Economic risk: Piracy and counterfeiting of intellectual property.
  3. Currency risk: Swings in exchange rates that alter production costs and wipe out converted profits.
  4. Management risk: Differences in culture, customs, and language (e.g., backlash when Coca-Cola transformed Acropolis columns into Coke bottles in Greece).
12
New cards

What is a global web, and how does the Apple iPhone demonstrate this concept?

A global web occurs when multinationals disperse value chain stages across the globe where perceived value is maximized and costs are minimized. For the Apple iPhone:

  • Design & software: California, U.S.
  • Advanced chips: Taiwan (TSMC)
  • Displays & memory: South Korea, Japan
  • Assembly: China, India
  • Sales & service: Worldwide
13
New cards

What is the difference between offshoring and outsourcing, and what hidden costs can arise from them?

  • Offshoring: Shifting an activity previously performed domestically to a foreign location.
  • Outsourcing: Contracting another firm (domestic or foreign) to perform value creation activities previously done in-house.
  • Hidden costs: Wage inflation, higher inventory from longer lead times, slower responsiveness due to long supply chains, higher coordination costs that hamper innovation, and IP protection risks.
14
New cards

What is the experience curve, and how much do unit costs fall in the aircraft industry when cumulative output doubles?

The experience curve refers to systematic reductions in production costs that occur over the life of a product as cumulative output increases. In the aircraft industry, each doubling of cumulative output cuts unit costs to about 80%80\% of their previous level.

15
New cards

What is the distinction between learning effects and economies of scale within the experience curve?

  • Learning effects: Cost savings resulting from learning by doing as workers and managers repeat tasks (especially large for complex, multi-step operations).
  • Economies of scale: Reductions in unit cost achieved by producing large volumes, which spreads fixed costs over more units and increases bargaining power with suppliers.
16
New cards

What are the four steps to leveraging subsidiary skills, and what McDonald's concept illustrates this?

The four steps are:

  1. Recognize that valuable skills can arise anywhere in the global network.
  2. Reward local employees with incentive systems to acquire new skills.
  3. Identify when new skills have been created.
  4. Transfer skills across the firm by acting as facilitators. Example: McCafé was developed in Melbourne, Australia (19931993) and subsequently rolled out worldwide.
17
New cards

What is reverse innovation, and what GE Healthcare example illustrates it?

Reverse innovation is the process where products are initially designed as low-cost, rugged, or simple goods for emerging markets and are subsequently exported back to price-conscious consumers in developed markets. Example: GE Healthcare developed a portable, low-cost ECG machine for rural clinics in India and later sold it in the U.S. and Europe.

18
New cards

What did Theodore Levitt argue in 1983 regarding global markets, and what does modern evidence show?

Theodore Levitt argued for standardizing products and services worldwide, assuming universal consumer needs and willingness to compromise on local tastes for lower prices. Modern evidence shows that 'one size fits all' does not generally apply; persistent national differences in tastes, preferences, and regulations require local adaptation, while flexible manufacturing has reduced the cost of product variety.

19
New cards

When are pressures for cost reductions greatest for an international business?

Pressures for cost reductions are strongest when:

  1. The product serves universal needs as a commodity (e.g., steel, sugar, memory chips, PCs).
  2. Major competitors are based in low-cost production locations.
  3. Persistent excess capacity exists in the industry.
  4. Buyers are powerful and face low switching costs.
20
New cards

What are the five main sources of pressure for local responsiveness?

  1. Differences in consumer tastes and preferences
  2. Differences in infrastructure and traditional practices
  3. Differences in distribution channels
  4. Host-government demands
  5. The rise of regionalism
21
New cards

What examples illustrate local responsiveness pressures stemming from infrastructure and host-government demands?

  • Infrastructure: Electrical systems run at 110 V110\text{ V} in North America versus 220–240 V220\text{–}240\text{ V} in Europe; driving on the left in the UK and Japan requires right-hand-drive vehicles.
  • Host-government demands: Passenger railcar manufacturing often requires domestic assembly; the USMCA trade agreement mandates approximately 75%75\% regional content for automobiles to enter tariff-free.
22
New cards

What is a Global Standardization Strategy, and when is it most appropriate?

A strategy focusing on increasing profitability through cost reductions derived from economies of scale, learning effects, and location economies, producing a standardized product worldwide at a few favorable locations. It is best when cost pressures are high and pressures for local responsiveness are low (e.g., Intel, Texas Instruments).

23
New cards

What is a Localization Strategy, and when is it appropriate?

A strategy that focuses on customizing goods and services to match tastes and preferences across distinct national markets, decentralizing decisions to country subsidiaries. It is best when consumer tastes differ substantially and cost pressures are relatively low (e.g., Unilever; Mondelez customizing Oreos with green tea in Japan and tiramisu in Italy).

24
New cards

What is a Transnational Strategy, and what makes it difficult to implement?

A strategy that attempts to simultaneously achieve low costs through location economies, scale, and learning while differentiating offerings across geographic markets and fostering multidirectional knowledge transfer among subsidiaries (e.g., Toyota, 3M, ABB). It is difficult because local differentiation tends to raise costs, creating conflicting organizational demands.

25
New cards

What is an International Strategy, and what is its primary vulnerability over time?

A strategy where a firm takes domestic products and sells them internationally with minimal local customization, centralizing R&D at home (e.g., Harley-Davidson, early Xerox). Over time, it becomes vulnerable when efficient, low-cost global competitors emerge (e.g., Canon and Ricoh entering with standardized, cheaper copiers to outflank Xerox).

26
New cards

What are the three fundamental entry decisions a firm must make when expanding abroad?

  1. Which foreign markets to enter (assessing long-run profit potential)
  2. When to enter (timing: early entry vs. late entry)
  3. On what scale to enter (large-scale strategic commitment vs. small-scale 'toe in the water')
27
New cards

What characteristics make a foreign market more attractive versus less attractive for entry?

  • More attractive: Politically stable developed and developing nations, free market-based economic systems, and low inflation paired with low private-sector debt.
  • Less attractive: Politically unstable developing nations, mixed or command economies, and countries prone to speculative financial bubbles and excess borrowing.
28
New cards

What are the primary first-mover advantages of early market entry?

  1. Preempting rivals by establishing a strong brand name before competitors arrive.
  2. Building sales volume early to ride down the experience curve ahead of rivals, securing a cost advantage.
  3. Creating switching costs that tie customers to the firm's products or services (e.g., JCB building an 80%80\% market share in backhoe loaders in India).
29
New cards

What are pioneering costs, and what disadvantages do early entrants face?

Pioneering costs are costs an early entrant bears that later entrants can avoid. Disadvantages include:

  • Greater risk of business failure due to ignorance of the foreign market environment.
  • High costs of promoting the product and educating unfamiliar customers.
  • Risk that changing host-country regulations will wipe out initial capital investments.
30
New cards

What are the trade-offs between large-scale and small-scale foreign market entry?

  • Large-scale entry: A major strategic commitment that is difficult to reverse, rapidly altering the competitive field and signaling strong commitment to rivals, customers, and governments (e.g., Tesla's Gigafactory Shanghai in 20192019).
  • Small-scale entry: Allows a firm to learn about the foreign market while limiting financial exposure, though it can make establishing substantial market share more difficult.
31
New cards

What are the key advantages and disadvantages of exporting as an entry mode?

  • Advantages: Avoids the high costs of establishing manufacturing operations abroad; helps realize experience curve and location economies; provides speed and flexibility (e.g., Harley-Davidson building bikes in the U.S. and shipping abroad).
  • Disadvantages: May not be viable if lower-cost manufacturing exists abroad; high transportation costs; exposure to tariff barriers; local foreign marketing agents may not act in the exporter's best interest.
32
New cards

What is a turnkey project, and in which industries is it most common?

A turnkey project is an arrangement where a contractor handles every operational detail of a project for a foreign client, including training personnel, and hands over the 'key' to a plant fully ready for operation. It is common in complex process industries like petroleum refining, chemical plants, pharmaceuticals, and metal refining (e.g., plants built in Saudi Arabia).

33
New cards

What are the advantages and disadvantages of international licensing agreements?

  • Advantages: The licensee bears the capital development costs and risks; allows the firm to overcome foreign investment barriers; monetizes intangible assets the firm does not wish to develop itself (e.g., Disney character licensing).
  • Disadvantages: Firm loses tight control over manufacturing and marketing needed for experience/location economies; inability to coordinate profits across borders; risk of losing proprietary technological know-how (e.g., Xerox licensing copier know-how to Fuji Xerox for a 5%5\% royalty).
34
New cards

How does franchising differ from licensing, and what are its main disadvantages?

Franchising is a specialized form of licensing in which the franchisee not only receives intangible property rights but must also adhere to strict operational and business rules (e.g., McDonald's, Subway). Disadvantages include:

  • Difficulty in monitoring product and service quality from a geographic distance.
  • Inability to transfer profits across countries for global strategic coordination.
  • The franchisor receives only a portion of the revenues.
35
New cards

What are the trade-offs of entering foreign markets through a Joint Venture?

  • Advantages: Access to a local partner's knowledge of culture, language, politics, and business practices; shared development costs and risks; higher political acceptability to host governments (e.g., Tata Starbucks in India, BMW Brilliance in China).
  • Disadvantages: Risk of giving away proprietary technology to the partner; lack of tight control to realize location and scale economies; potential conflict over control and strategic direction if partner objectives diverge.
36
New cards

What are the advantages and disadvantages of establishing a Wholly Owned Subsidiary?

  • Advantages: 100%100\% ownership provides maximum protection for proprietary core technology; allows tight control for global strategic coordination; essential for realizing location and experience curve economies (e.g., IKEA, Tesla Gigafactory).
  • Disadvantages: The parent firm bears the full costs and operational risks; requires extensive capital resources and complex integration with local labor and culture.
37
New cards

How does a firm's core competence (technological vs. management know-how) determine its optimal entry mode?

  • Technological know-how: Avoid licensing and joint ventures to prevent leakage of proprietary intellectual property; preferred entry mode is a wholly owned subsidiary (unless the technology's life is brief or licensing is needed to establish a global standard).
  • Management know-how (typical of service/franchise firms): The brand name is usually legally protected by trademarks; preferred entry mode is franchising combined with wholly owned subsidiaries or joint ventures for regional oversight.
38
New cards

What entry modes are best suited for firms facing strong pressures for cost reductions?

Firms facing intense cost pressures typically favor a combination of exporting and wholly owned subsidiaries. This allows them to manufacture in optimal low-cost locations (reaping location and scale economies) while retaining tight control over worldwide marketing subsidiaries and global supply chain coordination.

39
New cards

What percentage of foreign direct investment (FDI) inflows are mergers and acquisitions, and why do acquisitions frequently fail?

Mergers and acquisitions account for 40–80%40\text{–}80\% of all FDI inflows. Common reasons for acquisition failure include:

  • Overpaying for target assets due to management overconfidence (hubris hypothesis).
  • Severe post-acquisition clash of corporate cultures (e.g., DaimlerChrysler from 1998 to 20071998\text{ to }2007).
  • Integration taking longer and proving far more difficult than anticipated.
  • Inadequate pre-acquisition screening of target firms.
40
New cards

Under what specific conditions should a firm choose an acquisition over a greenfield venture, and vice versa?

  • Choose Acquisition when: Well-established incumbent firms already exist in the target country, and global rivals are also targeting the market, making rapid entry essential (e.g., Walmart forming a JV with Cifra in 19911991 and buying control in 19971997 to create Walmex).
  • Choose Greenfield when: There are no suitable incumbents to acquire, or the firm's competitive advantage is anchored in embedded organizational routines, operational culture, and processes that are difficult to impose on an existing firm (e.g., Toyota building its pickup plant in Guanajuato, Mexico in 20192019).
41
New cards

What are the three essential components required to make international strategic alliances successful?

  1. Careful partner selection: Finding a partner that helps achieve strategic goals, shares the firm's vision, and has a proven track record of not acting opportunistically.
  2. Robust alliance structure: Building contractual safeguards, walling off proprietary core technologies, agreeing to mutual skill swaps, and securing credible financial commitments.
  3. Proactive alliance management: Cultivating relational capital and interpersonal trust across cultural boundaries, learning the partner's skills, and diffusing acquired knowledge throughout the parent firm.