1/93
Looks like no tags are added yet.
Movements of the spine are a function of the following features:
Size and compressibility of the intervertebral discs.
Tightness of the joint capsules.
Orientation of the articular facets (zygapophysial joints).
Muscle and ligament function.
Articulations with the thoracic cage.
Limitations imposed by the adjacent tissues and increasing age.
The vertebral column consists of __ vertebrae
33
The thoracic and sacral curvatures are termed _____ curvatures because…
primary, they are present at birth.
The cervical and lumbar curvatures are ______ curvatures because they become prominent as…
secondary, an infant begins to hold the head upright, stand, and walk.
Purpose of curvature in sagittal plane
allows us to bend and not break under load
The superior articular process articulates with
the inferior articular process of the above segment
Intervertebral foramen is the space between the vertebral bodies and the facet joints. What exits through this space?
spinal nerves
Transverse processes of the cervical vertebrae extend laterally, containing transverse foramina that transmit the V 2 segment of the
vertebral artery and the vertebral veins
With age, the intervertebral discs degenerate, resulting in the direct approximation of the bony uncinate process of one vertebral body with that of the next, more superior vertebra. What does this change about the function of the joint?
Increases stability, loosing mobility - especially in lateral flexion
Projection up off the vertebral body and articulates with the body of the one above
Uncinate process
the uncinate processes are separated by intervertebral discs (except for atlas & axis, creating
uncovertebral joints
the superior articular surface of atlas articulates with
occipital condyles of the skull
Instead of a spinous process, the atlas has
posterior tubercle
The atlas is unique among cervical vertebrae because it lacks a
vertebral body and a spinous process
Each arch of the atlas has a tubercle that serves as an attachment for ligaments: _____ ______ ligament for anterior tubercle and ____ ligament (ligamentum nuchae) for posterior tubercle.
anterior longitudinal , nuchal
Sits in the anterior arch of the atlas for the atlas to spin on it
Dens axis
The superior articular facet of the ___ has a large surface to allow for spin
Axis
The axis has a body and a ___ spinous process.
bifid
The dens acts as the pivot around which rotation of the head takes place. It is stabilized against the anterior arch of C1 by the
transverse ligament of the atlas
The OA joint gets more _____ flexion/extension because of the shape of the facets
cranial
The upper cervical spine is typically used to describe __ - __. The cervical spine is often separated as upper and lower due to the structural differences between the vertebrae and how you would treat each of these regions very differently.
C1-C2
The __ joint is best at producing flexion and extension while the __ joint is best at producing rotation. The __ joint is responsible for nearly 50% of our cervical rotation.
OA (atlantoccipital), AA (atlantoaxial), AA
__ is the only spinous process of the cervical vertebrae that is not bifid, it has a large visible spinous process that you can easily palpate even in extension.
C7
The vertebral arch of the lower cervical vertebrae is formed by two _____ that unite with the spinous process and the _____ that connect directly to the vertebral body.
laminae, pedicles
The spinal cord occupies the space bounded by the vertebral arch, known as the
vertebral canal
All cervical vertebrae have a vertebral canal that is large relative to the overall size of the vertebra in order to accommodate the
cervical enlargement of the spinal cord.
Standard cervical vertebrae have transverse processes with a transverse foramen (foramen transversarium) that conveys the V 2 segment of the vertebral artery (except __) and the vertebral veins
C7
Bifid spinous processes are unique features of
C2 to C6
Ringlike bone; superior facet articulates with occipital bone.
Two lateral masses with facets
No body or spinous process
rotates on articular facets of C2.
Vertebral artery runs in groove on posterior arch.
Atlas (C1)
Dens projects superiorly.
Strongest cervical vertebra
Axis (C2)
Large, triangular vertebral foramen
Transverse foramen through which vertebral artery passes (except C7)
Narrow intervertebral foramina
Nerve roots at risk of compression
C3-C7
Short, bifid spinous process
C3-C5
Long spinous process
C6-C7
Vertebra prominens; nonbifid
C7
Has the most narrow vertebral foramen
T6
transverse process points posterior and inferiorly giving it much more overlap for protection and stability (less mobility)
Thoracic vertebrae
the commonly known facet joints are the
zygapophyseal joints
Note that on __ vertebra, there is only a single costal facet on each side that articulates with the head of the rib.
T12
heart shaped body with facets for rib articulation
small circular vertebral foramen
long spinous processes with slope posteriorly and overlap next vertebrae
Thoracic (T1-T12)
long transverse processes, with facets for rib articulation in
T1-T10
have vertebral foramen that are larger than thoracic and more triangular
Lumbar vertebrae
The lumbar vertebrae have ____ processes for _____ muscle attachments
bigger
kidney shaped body, massive for support
midsized triangular vertebral foramen
Lumbar vertebrae
Facets face medial or lateral direction, which permits good flexion and extension
lumbar vertebrae
Spinous process is short and strong
lumbar vertebrae
largest vertebra with massive transverse process
L5
Because its not rigid cord, it can wiggle out of the way in the foramina past L1-L2
cauda equina
Each lumbar superior articular process exhibits a ______ process that serves as an attachment site for deep back musculature (multifidus and intertransversarii).
mammillary
On the posterior aspect of the lumbar transverse processes, an accessory process is visible, which serves as an attachment for
intertransversarii muscles.
the opening of the sacral vertebral foramen
sacral hiatus
Coccyx can be dislocated most commonly in what patient populations
hypermobile and pregnancy
The foramina of the sacrum are oriented
anteroposterior
5 fused vertebrae with fusion complete by puberty
Sacrum
there are _ pairs of sacral foramina on dorsal and ventral side
4
Co2-4 are ___ while Co1 often is not
fused
Caudal epidural injections are administered at the
sacral hiatus.
This ligament keeps the dens pinned against the arch (and not in the canal pushing on the spinal cord!) and is made up of 3 parts
Cruciform ligament
ligament stabilizes the dens during rotation
Alar ligament
It is important to screen patients for injuries to the ligaments that support the ___ if:
hypermobile/EDS
pediatric with down syndrome
rheumatoid arthritis
after MVA
dens (cruciform ligament, alar ligament)
The posterior longitudinal ligament is renamed the ______ _____ at the level of C2.
tectorial membrane
The _____ ______ is a strong, broad band that extends from the vertebral body of C2 through the foramen magnum to attach superiorly to the occipital bone, where it blends with the cranial dura mater.
tectorial membrane
Note the Nuchal ligament which is a broad extension of the supraspinous ligament and limits
cranial and cervical flexion
The posterior longitudinal ligament is on the posterior of the vertebral bodies, limits flexion, and _____ as it goes down to the lumbar spine
narrows
has more stretch than usual ligaments, is segmented between pedicles
ligamentum flavum
the elastic recoil of these segmented ligaments help pull the back up into extension (resisting spinal flexion)
ligamentum flavum
The posterior longitudinal ligament is ____ in the lumbar spine, while the anterior longitudinal ligament is _____ in the lumbar spine
thinner, thickest
the supraspinous ligament covers the… and prevents…
tips of the spinous processes, flexion
Posteriorly, adjacent spinous processes are supported by____spinous ligaments and the overlying cord-like ____spinous ligaments that connect the tips of the spines.
inter, supra
On the posterior view, note the narrow posterior longitudinal ligament traveling vertically from the posterior aspect of the body of C2, inferiorly to the sacrum along the vertebral bodies and their associated intervertebral discs. This narrow ligament allows for most
intervertebral disc herniations to occur posteriorly because of a lack of support in this region.
The zygapophysial joints are more of a typical ____ joint, with a ___, and _____ cartilage
synovial, capsule, hyaline
Intervertebral discs are composed of a central nuclear zone of collagen and hydrated proteoglycans called the ____ ______, which is surrounded by concentric lamellae of collagen fibers that compose the _____ _____
nucleus pulposus, anulus fibrosus.
The anterior and posterior longitudinal ligaments help to stabilize these joints
intervertebral joints
movement helps pump and provide nutrition to the
intervertebral disc
water loving inner layer of intervertebral disc, acts as shock absorber
nucleus pulposus
hydrophobic outer layer of the vertebral disc
Anulus fibrosis
The articular capsules of the zygapophysial joints allow gliding motion, __-__ is most mobile and __ - __ permits most flexion.
C5-C6, L4-L5
This ligament on the anterior side of the spine is wide and present at the entire length of the spine from the occiput to the sacrum; it prevents _______ of the vertebral column
hyperextension
this ligament is weaker than AL and prevents hyperflexion
Posterior Longitudinal ligament (PL)
weak ligaments that connect spines
interspinous
ligament from C7 to occipital bone
ligamentum nuchae
This ligament is the cervical extension of supraspinous ligament and is strong
ligamentum nuchae
weak ligaments that connect the transverse processes
intertransverse ligament
the intervertebral discs are secured by what ligaments
AL and PL (anterior and posterior longitudinal)