1/291
Looks like no tags are added yet.
What is a composite sample
A composite sample is a mixture of multiple grab samples (cores) from different locations in a field. It is used to improve spatial or temporal coverage and get average nutrient concentrations without increasing the number of separate lab samples.
How many cores should be combined for a homogeneous field (20–25 acres) using a random or zig-zag pattern?
Combine 25–30 cores per composite sample. Avoid sampling near feeding areas and trees.
What is a representative sample
a small sample of the soil that accurately mirrors the key characteristics, demographics, and traits of the entire feild
What is the protocol for grid sampling?
Combine 8–10 cores per composite sample for each grid of 2–3 acres (taken 2–3 feet from each grid point). Clean tools between grid points.
What to take into consideration when you take a soil sample
Where (depth and distribution)
How many soil cores per composite samples
What time of year + how frequestly
How deep do you take soil core for N testing
as deep as the rooting depth
What is / when to use Zig Zag sampling
U randomly sample or walk in a W pattern across a field - Uniform Feilds
What is / when to use Gid Sampling
Split field into a grid pattern - used for precision ag + varoabel rate fertlizer tech + fields w/ mixed soil types
What is / when to use Zone Sampling
non - uniform grid approach (based on yeild, soil surverys, aerial imagery, land use / landscape position) + adds more layers of information
how you would go about interpreting a soil test report
Fertility potential is determined by OM and CEC levels
Know that CEC is btwn 5-40meq/100g
SOM must be over 1% (2% is avg)
Obvious issues (pH, salinity or sodicity)
Sodicity when exchanable Na >15%\
Salinity EC >4
pH is btwn 6-7.5
nutrient Sufficiency range:
concentration range in which added nutrients will not increase yield but may increase nutrient concentration.
nutrient deficient:
Concentration is low enough to severely limit yields. Deficiency symptoms may be evident
Critical Nutrient Range (CNR):
range in nutrient concentration above which nutrient supply is adequate and below which deficiency occurs.
Excessive or toxic:
A condition where a nutrient concentration in the plant tissue is excessively high, resulting in reduced plant growth, impaired metabolic functions, and lower yields.
Luxury Consumption:
plant absorbs nutrients that it doenst need and it does not improve yeild, no symptoms might be bad for environment
What are the symptoms of nutrient deficencies ( include leaf color/shape, position, chlorosism, and if there is chlorosis or leaf margin necrosis)
N P K Mg Ca S Mn/Fe B/Zn/Cu/Ca/Mo
N: Remobilizes, Affects all leaves; chlorosis in leaf and veins.
P: Remobilizes, Affects older leaves; purplish patches
K: Remobilizes, Affects older leaves; patches of chlorosis and leaf margin necrosis
Mg: Affects older leaves; patches of chlorosis
S: Affects young leaves; Uniform chlorosis
Mn/Fe: Affects younger leaves; interveinal chlorosis
B/Zn/Cu/Ca/Mo: Affectrs younger leaves; deforms growing tips

What is the difference in symptoms between Potassium (K) and Magnesium (Mg) deficiencies on older leaves?
Both affect older leaves with yellow patches and chlorosis, but Magnesium (Mg) causes interveinal chlorosis without leaf margin necrosis.
What factors affect tissue analysis (7)
Species, Growth stage, Part sampled, Crop stress, Time of day, handeling, method/timing of nutrient application
What are some key "DOs" when collecting plant tissue samples?
Collect a representative sample (10–20 sampling points).
Collect sufficient material (about the size of a softball when compressed).
Fill out the plant history questionnaire completely.
Identify the exact age and growth stage.
What are some key "DON'Ts" when collecting plant tissue samples?
Do not sample dead plants.
Do not wash leaf tissue.
Do not use plastic bags/containers or galvanized equipment.
Do not sample plants during severe drought or when severely damaged by insects/mechanically.
List different strategies for diagnosing nutrient deficiencies in your crop and discuss advantages and disadvantages
tissue analysis (recommended to also follow up with a soil test)
Pro: direct measurment
Con: can be easily thrown off + needs sampling procedures
Chlorophyll meters (more chlorophyll = less light transmittance - targets nitrogen
Pro: instant readings and effective for N levels
P much only for N and can be influenced by shade/sunlught levels
Remote sensing for N: looking at how greeness
Pro: great for N
Con: specialized equpiment, is up and coming
Why is it recommended to follow up a tissue analysis with a soil test (especially if a deficiency is found)?
While tissue analysis shows what the plant has absorbed, a soil test helps determine why (distinguishing between true soil nutrient depletion versus environmental factors restricting root uptake).
Remobilization
The internal movement of mobile nutrients (like Nitrogen, Phosphorus, and Potassium) from older plant tissues to younger, actively growing plant parts when current uptake is insufficient.
Why can waiting for visual symptoms to diagnose a nutrient deficiency be risky for crop yield?
Because once visual symptoms are visible, yield loss might already be realized and locked in.
Why might a plant show deficiency symptoms (like low Nitrogen) even when a soil test shows high nutrient levels?
Non-nutritional environmental factors (such as waterlogging, soil compaction, or cold temperatures) can restrict root function and prevent the plant from taking up nutrients.
Why is setting a yield goal challenging, and what criteria should be considered when determining one?
It is challenging because yield levels vary from year to year
Production history
Soil productivity
Management level
Yield-limiting factors (most limiting nutrient, crop cultivar, irrigation availability, surface drainage, pest management)
What are the general guidelines for setting a realistic yet challenging yield goal?
Use a value between an above-average yield and the maximum yield observed in that field.
Target 10% above the 3–5 year average yield.
What is the global average Nitrogen Use Efficiency (NUE), and what can be achieved under Best Management Practices (BMPs)?
Global average: Only 50% of applied fertilizer N is taken up by the crop.
Best Management Practices: 75% and above can be achieved.
How much residual soil nitrate (NO3) measured at preplant is safe to assume will be available to the crop?
60–80% of residual nitrate will be available to the crop.
What is the standard weight of 1 Acre Furrow Slice (AFS) of soil?
2,000,000 lbs of soil (unless otherwise stated).
What is a good rule of thumb for estimating annual Nitrogen mineralization from Soil Organic Matter (SOM)?
Roughly 2% of Soil Organic Nitrogen (SON) mineralizes per year
What is the formula for the Nitrogen Recommendation Model
Nfert =(Ncrop - Nsoil) - (NOM+ NL + Nmn + NI + NDEP+…) / NUE
= (Ntaken up by crop - N avalible in soil) - (NOM+ N from Legumes +Nmanure + NIrrigation +Natmospheric+…)
What are the 4 steps of the Nitrogen budgeting approach?
Determine how much N the crop will take up (Ncrop)
Estimate ALL sources of N already in the soil or added through non-fertilizer inputs.
Estimate the rate of fertilizer N loss/inefficiencies (NUE)
Calculate the N application rate by subtracting existing N sources from crop N uptake and dividing by NUE.
What nutrient do you use a budgeting approach for
Nitrogen
Which nutrients are best suited for the crop response approach, and why?
hosphorus (P) and Potassium (K), because their availability is controlled by different mechanisms and they are less mobile/dynamic in the soil than N.
What are the 4 fertilizer recommendation strategies based on preliminary soil test levels?
Build-up strategy: Increase soil nutrient concentration (for very low/low levels).
Sufficiency strategy: Apply enough to reach the critical level.
Maintenance strategy: Keep nutrient levels within the optimal maintenance range (replace what is removed at harvest).
Draw-down strategy: Apply no fertilizer so soil test levels drop (for very high levels).
What are the general guidelines for P fertilization rates based on crop response thresholds?
Well below threshold: Rate should exceed total crop P uptake (sometimes several times higher).
Close to threshold: Rate should be close to expected harvest P removal.
Well above threshold: No P fertilizer is likely required; if applied, limit to no more than crop harvest removal to prevent further soil P enrichment.
What is the plant available form of P soil?
H2PO4 and HPO4
How much of the total soil P is typically found in plant available form?
Less than 1%
What is the role of P in the plant?
Component of DNA, photosynthesis, ATP and NADP for energy storage and transfers
Name at least two P-rich minerals
Apatite and Strangite
What is the difference between P adsorbed on colloids versus P precipitated in secondary minerals
Adsorbed P is held on the surfaces of clay minerals and Fe/Al oxides. Precipitated P has formed solid Ca, Fe, or Al phosphate minerals. Both can reduce P availability, but adsorption is a surface interaction, while precipitation forms a separate mineral solid.
How much of total soil P is typically found in the soil organic matter pool?
30-60%
How can we conceptualize soil organic P?/
large, varied reservoir of P in organic material at different stages of decomposition. Microorganisms and enzymes can release some of it, but not all organic P is readily available.
What is the typical C:P ratio of microorganisms?
Btwn 6 - 13
What is the typical uptake efficiency of applied fertilizer P?
10-30%
How do you determine whether P fertilizer application is required or not?
Olsen soil P test which measures yield and whether added P is likely to improve it.
Which factors impact adsorption/desorption from colloids and precipitation/dissolution from secondary minerals of P
adsorption/desorption: pH, clay content, amt of soil Ca, Fe, and Al.
precipitation/dissolution: pH and the concentrations of soil Ca, Fe, and Al.
Which conditions favor P mineralization?
High OM and Low inorganic P = High Mineralization
Which conditions favor P immobilization?
Favored by low P high C:P OM
Explain the difference between enzymatic hydrolysis and biological solubilization
Enzymatic hydrolysis uses enzymes such as phosphatases to release P from organic compounds.
Biological solubilization uses organic acid anions to bind Ca, Fe, or Al and release P from phosphate minerals.
how and why P availability is affected by total soil P content:
It sets the size of the potential P supply, but only a small share is in solution and readily available. A soil can contain a lot of total P while having little immediately available P.
how and why P availability is affected by Ca, Fe, Al concentrations:
They can bind P in secondary minerals or on mineral surfaces. This reduces solution P; how strongly it happens depends on soil conditions such as pH.
how and why P availability is affected by pH:
In acidic (low pH) soils, P can be strongly associated with Fe and Al oxides; Ca phosphates are also affected by pH.
how and why P availability is affected by Contact of soil solution to soil minerals and roots:
P moves through soil mainly by slow diffusion. Roots need to encounter P in the soil solution, or reach nearby P that can be released from minerals or colloids.
how and why P availability is affected by temperature:
Temperature influences weathering and biological activity, which can affect how quickly P is released and cycled. The slides list temperature as a factor but do not specify a numerical effect.
how and why P availability is affected by clay type/types of colloids:
Clays and Fe/Al oxides provide surface area and sites that can adsorb P. Some Fe/Al oxides also have tiny pores that can trap P, making it less available.
List 4 ideas to increase P availability for your crop, based on our understanding of the physicochemical processes governing P cycling
Root exudates containing organic anions to bind Ca, Fe, and Al to release O
Use phosphates to release P from OM
Mycorrhizal associations
Improve root architecture
Which P can you find in an Olsen P extract?
extractable soil-P measure used to estimate the P available to crops. It doesn’t estimate all P in the soil only PAP
List advantages and limitations of the Olsen P test
Advantage: practical soil-test estimate that can be related to crop yield response and fertilizer need
Limitation: it is an estimate and P is very variable
Why is runoff the dominant P loss pathway in most ecosystems?
P is held strongly in soil particles so doesn’t really leach but it can be transferred with soil runoff and if recently applied can wash away
Under what circumstances does leaching become an important P loss pathway
In sandy soils where there is less CEC
What are the consequences of P loss for the environment?
Eutrophication and contamination of ground and surface water
What is the P index? Who developed it and how do you use it?
A tool to estimate P loss potential for a specific site
What are the factors in the P index used to determine the risk of P loss?
Soil erosion, irrig, soil runoff class, distance from watercourse, soil p, fertilizer app rate and method, org p source app rate and method.
How can the risk for P loss be reduced?
apply only needed P, incorporate fertilizer when appropriate, avoid applying P before runoff-producing events, and keep nutrients away from waterways, soil erosion prevention
Explain the difference between root foraging, P mining, and increasing P use efficiency
Root foraging: helps plants find P with less soil
P mining: release P from minerals or OM using educates/enzymes
P use efficiency: producing more growth or yield for each unit of P the plant takes up.
How can the plant make 'cheap' roots?
reducing the metabolic cost of exploring soil, When you need more nutrients but don’t have enough energy to put all of it into this, grow "shittier roots
How does the root angle and root hair length affect P uptake?
The more vertical the roots grow, the lower the yield under low P input compared to high P input
What are cluster roots?
Specialized root structures that release organic anions, or carboxylates, to help solubilize P from minerals.
What is phosphatase?
An enzyme that helps break down organic P compounds, releasing inorganic P that plants can take up.
List the 4 pools of K in the soil
Soil-solution K, readily available (exchangeable) K, slowly available or fixed K, and K in primary minerals.
What is the role of K in the plant?
K helps regulate stomatal opening and closing and water use. It supports growth, root development, crop quality, disease resistance, and winter hardiness. Unlike many nutrients, it is not built into plant molecules; it remains as K⁺ in solution in plant cells.
How easily is K on the CEC available in the plant?
K held weakly on CEC sites is readily available and can replenish soil-solution K as plants take it up. K held strongly between clay layers is fixed and is not readily available in the short term.
Which K pools are targeted when conducting an ammonium acetate extraction?
It mainly measures soil-solution and exchangeable K, the readily available pools. It does not measure all K locked in primary minerals or strongly fixed between clay layers.
When would you expect high rates of K fixation?
In soils with K-fixing 2:1 clays, especially vermiculite and some illite, particularly when K is present in solution and can enter clay interlayers. Some smectitic clays release part of their interlayer K more readily
How would you ensure plant K uptake in soils with high K fixation potential?
Use soil and crop information to guide K applications, and account for the fact that some applied K may become fixed rather than immediately available
Which factors affect risk for K loss through runoff versus leaching?
Runoff risk rises when rainfall or irrigation exceeds the soil’s ability to absorb water, especially where erosion transports soil particles. Leaching is more important in soils with low K-binding capacity, such as sandy soils.
What are the implications of K loss through runoff or leaching?
K loss is not known to cause particular environmental hazard
How is K availability affected by CEC, SOM, texture, and clay type?
High CEC = Hold More K
Texture and Clay amt influence CEC = amt K held
More SOM = High CEC = Hold More K
2:1 clays can also fix K between layers
Compare and contrast which concepts, pools and processes are similar or different between the N, P and K cycle
What is the role of S in the plant?
S is part of the amino acids cysteine and methionine and is involved in protein synthesis and enzyme activation.
What do garlic, cabbage, sprouts and onion have in common, in relation to sulfur?
They are in plant groups that often have high sulfur needs and the S contributes to taste
How common are S deficiencies in crops?
have become more common across the United States with higher crop yields and cleaner air
What are some visual symptoms of S deficiencies in plants?
Young leaves light green with lighter colored veins
Draw the S cycle

What are the dominant forms and distribution of S in the soil profile of a mollisol, spodosol, oxisol. Explain the observe patterns!
Mollisol: organic S is concentrated near the surface and declines with depth, inorganic S increases with depth
Spodisols: High amounts of organic S in soil surface and subsurface, very little inorganic s
Oxisols: inorganic S dominates and increases with depth in the diagram. More organic S on the top and decreases
How common is calcium in the Earth's crust
fifth most abundant element in Earth’s crust
What is the role of calcium in the plant?
Ca helps form and stiffen cell walls, is required for cell division, and contributes to plant responses to stress.
Why do you think calcium tissue concentrations are greater in Brassicas compared to grasses?
differences in plant nutrient composition and requirements.
In soils with high calcium concentrations, what could cause blossom end rot in tomatoes?
Blossom-end rot can still occur if Ca is not delivered to the fruit. Water stress reduces transpiration and slows Ca transport through the xylem, and high levels of other cations can also reduce Ca uptake.
Draw the calcium cycle
The calcium cycle part II