1/58
Looks like no tags are added yet.
Latitude
Distance north or south of the equator, side to side lines
Longitude
Distance east or west of the prime meridian. up and down lines
Sextant
navigation tool used to determine a ship's latitude and longitude (by measuring the altitudes of stars).
Latitude: determine the angle between a celestial object and the horizon
Chronometer
instrument for measuring time very accurately
Earth rotates eastward, 15 degrees every hour
Record time of chronometer at noon, where the sun is directly over time, then compare it to ship time (noon)
(hour x 15=degrees) --> E or W
Eratosthenes
calculated the circumference of the earth
measured the angle of a shadow cast by a stick at noon on the summer solstice in Alexandria, and found it made an angle of about 7.2 degrees, or about 1/50 of a complete circle
Pytheas
voyaged to places not yet known, proving there was more to earth than shown on the maps
Celestial Navigation: determines the angle between the horizon and the North Star
Celestial Navigation
The technique of finding one's position on Earth by reference to the apparent positions of stars.
determines the angle between the horizon and the North Star- Latitude only
In the Southern Hemisphere there is no bright star above the rotational axis, so other stars, including the Southern Cross, are used to find "South"
GPS
A system that determines the precise position of something on Earth through a series of satellites, tracking stations, and receivers.
Soundings
Measurement of the depth of water usually using long rope
Echo-Sounding
A system that uses transmitted and reflected sound waves to measure distances to the ocean floor; sonar
Sound source and receiver (hydrophone) on hull of ship
High frequency sound waves travel through the water, reflect off of the seafloor, and recorded by hydrophone
Multi-beam sonar
several sound waves at different angles, to measure the depth of a swath of seafloor rather than a single line
provides incredibly detailed imagery of the seabed
Instruments emit multiple beams of sound waves, which are reflected off the ocean floor.
Side-scan sonar
Like an echo sounder, but it images a 60 km swath of the seafloor
Overlapping swaths- can give 360 coverage
Produces very high resolutions of the seafloor
But it would take a super long time to map the entire seafloor by this method
Matthew Maury
Considered the father of oceanography
Constructed the first ocean-wide bathymetric map
He recognized the mid-Atlantic ridge- called it the "Telegraph Plateau"
"Pathfinder of the Seas"
Seismic Reflection Profile
2D
Lower frequency is used to penetrate deeper below the seafloor
May not get a clear image of the seafloor w this
We look at the structure of sedimentary layers beneath the seafloor
"Reflectors" reveal sub-seafloor structure, such structures may provide traps for hydrocarbons
Satellite Altimetry
Bathymetric and topographic maps are vertically stretched so you can better see valleys and hills.
Bathymetric Map
A map of the bottom of the ocean showing the contours of the ocean floor and its geologic features
the submerged equivalent of an above-water topographic map. On a bathymetric chart, isobaths mark lines of equal elevation.
Radiometric Dating
method used to determine the age of rocks using the rate of decay of radioactive isotopes
Early Atmosphere Composition
rich in carbon dioxide (CO2 ), methane (CH4 ), water (H2O), hydrochloric acid (HCl), hydrogen sulfide (H2 S) and nitrogen (N2 ) (no free oxygen, O2 )
Origin of Ocean Water
Volcanic gases are rich in H20
Earth cooled down, water vapor condensed and accumulated as liquid water
Some of the Earth's surface water may be extraterrestrial in origin (comets are made of ice)
derived from the mantle via volcanism*
Radioactive Decay
the process in which a radioactive isotope tends to break down into a stable isotope of the same element or another element
the number of protons in the atom changes, and one element transforms into another.
Crust
Granite: continental crust (less dense than ocean crust)
Basalt: ocean crust
Differences in both the thickness and density of the crust result in having two dominant elevations on Earth: continents & ocean basins
Granite Crust (Continental)
Thick, less dense
Composed of light colored felsic rocks like granite
Avg density: 2.7-2.8 g/cm3
Thickness: 30-40 km
"Buoyant" continents stand high
Preferentially preserved during collision
0 to > 3.8 billion years old
Basalt Crust (Ocean)
Thin, more dense
Composed of dark colored mafic rocks like basalt
Average density of 2.9-3 g/cm3
Thickness: 4-10 km
Forms ocean basins
Subducted at trenches during collisions
0-280 million years old
Mantle
The layer of hot, solid material between Earth's crust and core.
Lithosphere and Asthenosphere
The rigid lithosphere, which includes the crust, rests on the softer material of the asthenosphere.
Being closer to the Earth's core, the asthenosphere is a higher temperature as compared to the lithosphere and hence its rocks are plastic and can flow. In comparison, the lithosphere's rocks are more rigid. The asthenosphere is more dense and viscous in comparison to the lithosphere. The lithosphere is comprised of a large number of fragments, each of which is known as the tectonic plate. These tectonic plates are in constant motion and are floating over the plastic material underneath.
Seismic Waves
There are several steps of greater seismic velocity with increasing depth within the Earth
-crust/mantle boundary
-mantle/core boundary
Attributed to changes in the physical properties of rocks due to changing temperature, pressure and volatile content (such as water) with depth
Increase in seismic velocity at crust/mantle boundary is called the Moho
A zone of lower seismic velocity in the upper mantle corresponds to an interval of easily deformed rocks called the asthenosphere. The D" (D double prime) layer marks the transition from mantle rocks (rich in silicate minerals) to the core (composed of iron and nickel).
P Waves
A type of seismic wave that compresses and expands the ground.
travel fast through the Earth
S waves
seismic waves that vibrate from side to side as well as up and down
slower and cannot travel through liquids
Accretionary Wedge
zone at trench where sediments are squeezed due to convergence of 2 plates
continental margin
the zone of the ocean floor that separates the thin oceanic crust from thick continental crust
Why is the Atlantic Continental Margin wide and the Pacific Continental Margin (offshore California) narrow?
Narrow margins= earthquakes/volcanoes because of tectonic plates
Wide margins= stable tectonic plates, 0-rare earthquakes and volcanoes
Continental Shelf
A gently sloping, shallow area of the ocean floor that extends outward from the edge of a continent
offshore extension of the continent, relatively shallow
Shelf edge: ~ 120-200 m deep, average of 200 m wide
Continental Slope
the slope between the outer edge of the continental shelf and the deep ocean floor.
Continental Rise
thick accumulation of terrigenous (land) sediments at base of the slope (= deep-sea fans)
where it begins to rise
Ocean Basin
The deepest part of the ocean floor; made up of rolling hills and flat plains.
Abyssal Plain
a smooth, nearly flat region of the deep ocean floor
Volcanoes
an opening in the Earth's crust through which molten lava, ash, and gases are ejected.
Atolls
Circular shaped islands made of coral reefs
Guyots
flattened seamounts caused by erosion from waves and currents
Trenches
("Subduction Zones"):
typically present instead of the deep-sea fans of the continental rise
deep, long, narrow, steep-sided troughs seismically active associated with volcanism landward of the trench
Spreading center
The region at the crest of a mid-ocean ridge, where new crust is being formed by seafloor spreading.
Divergent plate boundaries
characterized by shallow earthquakes.
Oceanic Ridge
Long chains of mountains within ocean basin
Upwelling of Asthenosphere
This is where the youngest crust is formed
Melts and produces buoyant magma and volcanism at the seafloor
Passive Margin
Edge of a continent along which there is no tectonic activity.
Boston
Active Margin
A continental margin that is colliding with another plate and as a result is geologically active
Earthquakes/Volcanoes
California
Ring of Fire
A major belt of volcanoes that rims the Pacific Ocean
Lithospheric plates
large pieces of Earth's lithosphere that move over the asthenosphere
Why do lithospheric plates move?
convection currents in the mantle
Where are the largest earthquakes found?
Around the Pacific Ocean--- because of active margins
Convergent boundaries:
ocean-ocean
ocean-continent
continent-continent
Ocean-Ocean convergence
produce island arcs
arcuate chain of volcanoes forms landward of trench on overriding plate
Older crust slides below the newer one because it's more dense
Once the ocean crust gets older and colder, it gets pulled down into the subduction zone and keeps recycling itself- which is why it's so young
Ocean-Continent convergence
produce volcanic mountain chains near the edge of a continent
chain of volcanoes forms landward of trench on overriding plate
Continent-Continent convergence
produce very high mountain ranges
results in high topography due to convergence of two continental land masses
Divergent boundary
two plates are moving away from each other. Mid-ocean spreading centers, new ocean crust is made here
Transform boundary
when 2 plates slide past each other. The San Andreas fault in California is an exam of a transform fault
Magmatic arc
A line of volcanoes. Generally the line, as seen from above, is curved.
Hot Spot volcanoes
• A hot spot is an area where material from deep in the mantle rises and then melts, forming magma
intra-plate volcanism (within a plate)
• linear chains of islands, seamounts, or ridges due to plate moving over stationary hot spot rooted deep in the mantle
• over time, plate continues to move over hot spot resulting in linear chain of volcanoes
Mid Atlantic Ridge vs East Pacific Rise
the Mid-Atlantic Ridge is a slow spreading center, whereas the East Pacific Rise is a fast spreading center.
Fast Spreading Rates
- large magma chambers
- poorly-defined central rift valley
- broad oceanic ridge due to high heat flow
- e.g., East Pacific Rise
Slow Spreading Rates
- small, discontinuous magma chambers
- well-defined central rift valley
- relatively narrow and steep oceanic ridge
- e.g., Mid-Atlantic Ridge