C8: chemical analysis

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/18

encourage image

There's no tags or description

Looks like no tags are added yet.

19 Terms

1
New cards

What is a pure substance?

A single element or compound, not mixed with any other substance. Everyday - a substance with nothing added to it (e.g. pure milk)

2
New cards

How could you determine if a substance is pure?

Measure melting + boiling point - pure elements / compounds melt and boil at specific temperatures (e.g. 100oC for water)


3
New cards

What is a formulation?

A complex mixture that has been designed as a useful product (e.g. fuels, medicine, paints). In a formulation, components are mixed in carefully measured quantities to ensure the product has the properties we need.

4
New cards

What are the phases of chromatography?

  • Stationary phase - paper

  • Mobile phase - solvent


5
New cards

What is the chromatography Rf equation? How to calculate it?

  1. Draw a pencil line where the solvent reached.

  2. Measure the distance from the centre of the spot to the top pencil line, and measure the distance from the bottom pencil line to top pencil line.

  3. Use following equation:

Rf (no unit) = distance moved by substance / distance moved by solvent


6
New cards

Why do we use pencil to draw the line in chromatography?

It doesn’t move up the paper with the solvent.

7
New cards

How can we use chromatography to identify an unknown substance?

  • Perform paper chromatography

  • Calculate Rf value by measuring solvent + substance distance

  • Different substances have different Rf values, so we can look these up on a database to identify compounds.

Note: if a substance is pure, it will produce a single spot in all solvents.


8
New cards

Required Practical: chromatography

  1. Draw a pencil line, using a ruler, along the chromatography paper - roughly 2cm from the bottom.

  2. Use a capillary tube to put a small spot of each colour along the line, each about 1cm apart.

  3. Pour water (solvent) into a beaker to a depth of 1cm.

  4. Attach paper to a glass rod using tape. Lower into the beaker - ensuring the bottom of paper touches the water, but the pencil line is above the water surface.

  5. Observe colours moving up the paper. Remove once the water has travelled at least ¾ of the way up.

  6. Hang the paper up to dry.


9
New cards

What are the gas tests for oxygen, carbon dioxide, chlorine, and hydrogen?

  • Oxygen - glowing splint in test tube of gas, result: split relights

  • Carbon dioxide - bubble gas through limewater (aqueous solution of calcium hydroxide), result: cloudy

  • Chlorine - damp litmus paper in gas, result: bleaches litmus paper white

  • Hydrogen - lit split in test tube of gas, result: squeaky pop


10
New cards

What are the flame tests?

Dip flame wire into solution and hold wire tip in a blue bunsen burner flame.

  • Lithium - crimson

  • Sodium - yellow

  • Potassium - lilac

  • Calcium - orange-red

  • Copper - green


11
New cards

What are issues with the flame tests?

The colour can be difficult to distinguish, especially if there is a low concentration of the metal compound. Sometimes a sample contains a mixture of metal ions which may mask the flame colour.

12
New cards

What is flame emissions spectroscopy?

  • Sample put into a flame and the light given out is passed through a spectroscope

  • The output is a line spectrum that is specific to specific metals so can be used to identify the metal ions. The lines also become more intense at higher concentrations, so you can also determine concentration.


13
New cards

What are the advantages of instrumental methods to identify compounds (e.g. flame emissions spectroscopy)?

  • Rapid

  • Sensitive - to even a small sample

  • Accurate


14
New cards

What are the sodium hydroxide precipitate reactions?

Add sodium hydroxide to metal ion solution and observe colour.

  • Solution of calcium ions (e.g. calcium chloride) - white (use flame tests to differentiate)

  • Solution of aluminium ions - white (only one which dissolves in excess sodium hydroxide solution - use to differentiate)

  • Solution of magnesium ions - white

  • Solution of iron (II) ions - green

  • Solution of iron (III) ions - brown

  • Solution of copper ions - blue


15
New cards

What are the chemical formulas for precipitates in sodium hydroxide precipitate tests?

  • Calcium hydroxide - Ca(OH)2

  • Magnesium hydroxide - Mg(OH)2

  • Aluminium hydroxide - Al(OH)3

  • Iron (II) hydroxide - Fe(OH)2

  • Iron (III) hydroxide - Fe(OH)3

  • Copper hydroxide - Cu(OH)2

Note: all will have (s) state symbol


16
New cards

How can we identify carbonates?

17
New cards

How to test for carbonates?

  1. Add dilute acid to sample.

  2. The acid will react with the carbonate to make carbon dioxide.

  3. Identify gas using carbon dioxide test - if positive, it is a carbonate ion.


18
New cards

How to test for halides?

  1. Add dilute nitric acid to the sample then dilute silver nitrate solution.

  2. Observe colour of precipitate formed:

  • Chlorine ions - white precipitate

  • Bromide ions - cream precipitate

  • Iodine ions - yellow precipitate


19
New cards

How to test for sulphates?

  1. Add dilute hydrochloric acid to sample.

  2. Add barium chloride solution.

  3. If sulfate ions are present, there will be a white precipitate formed.