1/37
Looks like no tags are added yet.
SWM Training. When?How?
-New Hires
-Annually
-Permanent or temporary job change.
Two rounds of Observation, Explanation, Commentary, and Drill during the first and last thirds of the day.
Begins with Observation: Y for safe, N for needs work and N for not observed
Trainer will provide explanation for any risk method observed
Trainer will demonstrate the correct way(Commentary)
Employee Demonstrates(Drill)
At the end, trainer will document two areas to work on and two areas performed well
Dress for the job
Comfort clothing that controls body heat
Sturdy Work shoes
Work Area Ready
Equipment and safety aids must be available(Load stands). Store when done.
Industrial Athlete
being well rested, stretching warm ups, preventing dehydration,
Know your power zone(lifting/lowering)
Area that gives you maximum strength with the most comfort. Keep the object close to the body and from mid thigh to the shoulders
Eliminate or minimize end range motion(lifting and lowering)
Improving body position and using equipment reduces risk of injury and fatigue
Slide walk or roll heavy objects
Maintain contact between object and stable surface or elevate the work(stage bulk), working within your limits.
Slide walk or roll heavy objects(lifting lowering)
working within your limits. Maintain contact between object and stable surface or elevate the work(stage bulk)
Know your limits(lifting/lowering)
Varies by individual, slide or team lift heavy packages, lowers risk of injury
Five keys to prevent slips and falls
Look before stepping
Establish footing and maintain balance
Adjust for changing conditions
Don’t run
Stay off rollers, unsecured belts chutes and slides
Safe walk paths
Use designated pathways, keep eyes ahead of work, Scan your work area. Reduces risk of objects or equipment striking you
Ascending and descending
Face ladders with three points of contact and using every step. If slip, you’ll stop the fall.
Know your power zone(pushing/pulling)
Maximum strength with the most comfort. Hands in front of the body near waist level and up the shoulders
Eliminate end range motion(pushing/pulling)
Improving body position, get close and move feet to maintain power zone.
Know your limits(pushing/pulling)
Varies by individual, team lift heavy packages, lowers risk of injury
Secure footing and surface contact
Sturdy work shoes prevent or reduce slips and maximize leg strength
Slide walk or roll heavy less portable objects(pushing pulling)
work within your limitations. Maintain constant contact with object and stable surface. Push or pull with a steady motion
Preferred method push vs pull
Pushing is preferred. Pushing incorporates more muscle groups
Yard safety
Only certified personnel are allowed outside of the walkways and break areas. Personnel must also wear reflective vests anytime they’re in the yard. Personnel working in the yard must place cones or flags.
Safety as pedestrian
Stay within designated walk paths, establish eye contact and communicate with vehicle operators
Conveyors
Designed to move packages not people. Conveyors must be secured anytime I need to get on the belt. Only authorized employees can perform lockout procedures. Stay out of restricted areas.
Have a set routine
You will notice the unusual. Recognize patterns and act to prevent injury
Use designated walk paths
Reduces the risk of being struck by objects or equipment
Place packages securely
Follow hand-to-surface methods. Secured packages are less likely to move or fall.
Face your work
standing at a 30-45 degree angle allows you to see work that is coming and where it’ll be going. More likely to see hazardous situations.
Open doors cautiously
Keep head down to prevent debris in eyes, open cautiously being aware that packages may have fallen against it. Report if it is difficult to open.
Dog bites
Never turn your back to a dog. Never pet a dog. If bit, notify a manager.
Know location of emergency equipment and shutoffs
ALL employees must know where emergency shutoffs and safety showers are.
Know the emergency response plan
Where the nearest exit is and where to assemble after exiting in an emergency, and where the refuge area is in a non-evacuation emergency.
Maintain adequate egress
Do not block egress with packages or equipment, we must be able to get to an exit, through an exit, and away from the building.
Be aware of sharp edges and splintered surfaces
Plastic banding and wooden pallets may contain sharp edges. Test boxes for unsecured sharp objects inside.
Keep work area clean
“Clean as you go” clean work areas allow you to work more efficiently and safely. Store equipment and dispose of trash
Train
Workout, weight training
Fuel
Healthy and nutritious diet
Rest
8 hours or more of sleep along with breaks
Rehydrate
drink plenty of water
Refresh
Take a break and cool down
Recover
Plenty of sleep and rest after injury or sickness