1/55
Vocabulary practice flashcards covering construction blueprints, framing systems, beams, girders, floor joists, and structural requirements from NCCER Carpentry Module 27105-13 (Floor Systems).
Specifications
A written legal document included with a set of construction prints that clarifies drawings by detailing the quality and quantity of materials, construction methods, and standards of work to be performed.
Pier
A masonry or concrete structural column used to support other structural members, typically floor beams or girders.
Swing
The direction of door rotation as shown on architectural floor plans.
Foundation Plan
An architectural plan view showing the entire substructure below the first floor, specifying the locations and dimensions of footings, grade beams, foundation walls, stem walls, piers, and anchor bolts.
Floor Plan
A cutaway plan view (top view) detailing room layouts, exterior walls, interior partitions, door swings, stairways, and room dimensions for a specific building floor.
Section Drawing
A cutaway view through a wall or object showing internal construction details and hidden material assemblies that cannot be clearly seen on a floor plan.
Detail Drawing
A construction view drawn to a larger scale to clearly display intricate assemblies or features that are too small to depict adequately on standard plan or elevation sheets.
Structural Drawings
Drawings created by a structural engineer detailing requirements for structural components, including columns, beams, bearing walls, steel joists, concrete planks, and anchor bolt spacing.
Mechanical, Electrical, and Plumbing (MEP) Plans
Specialized construction sheets showing HVAC ductwork, registers, lighting, electrical service distribution, and gas or water supply systems that may require customized framing accommodations.
Title Block
A section of a construction drawing providing essential administrative data, including the sheet title, scale, revision date, drawing number, and architect or engineer of record.
Platform Frame
A framing system (also known as western frame) in which each floor is constructed as an individual, self-contained platform upon which exterior and interior walls are built and erected.
Balloon Frame
A framing method commonly used in hurricane-prone areas where wall studs extend continuously from the foundation soleplate to the upper rafter plate without horizontal breaks between floors.
Ribbon
A horizontal 1Ă—4 or 1Ă—6 board let into notches cut into balloon-frame studs to provide support for second-floor joists.
Fire Stop
An approved, code-mandated material installed in hollow wall passages and frame spaces to block airflow and retard the spread of fire between floors or framing cavities.
Post-and-Beam Frame
A framing method (plank-and-beam) utilizing large, widely spaced timber posts and beams—often spaced 48in on center or up to 8ft apart—covered with heavy 2-inch nominal planks to create wide open spaces.
Post-Frame Construction
A structural building system (pole construction) featuring large roof trusses supported by heavy perimeter posts and stabilized with horizontal girts, commonly utilized in agricultural pole barns.
Structural Insulated Panels (SIPs)
Energy-efficient structural panels manufactured with a thick rigid foam core sandwiched between two structural facing panels, providing high insulation values and airtightness for post-and-beam construction.
Let-in
A notch cut into a stud, joist, or structural member designed to receive and hold another member, such as a diagonal wall brace or ribbon board.
On Center (OC)
The standard center-to-center spacing measurement between adjacent framing members, such as joists, studs, or rafters.
Seasoned Lumber
Wood that has been kiln-dried or air-dried to an optimal moisture content (typically approximately 19% for framing members) to minimize shrinkage, settling, and warping.
Soleplate
The lowest horizontal framing member of a stud wall assembly that rests directly on the subfloor and anchors the studs.
Span
The clear, unsupported distance between structural supports such as foundation walls, columns, piers, or girders.
Foundation
The substructure of a building, including the concrete footings, grade beams, and foundation walls, designed to transfer the entire load of the structure into the soil.
Sill Plate
The lowest horizontal framing member of a wood-framed structure (commonly 2Ă—8 pressure-treated lumber) anchored to the foundation wall to support floor joists and protect untreated lumber from masonry moisture.
Sill Sealer
A flexible, foam insulating material installed between the top of the foundation wall and the sill plate to cushion irregularities and seal against air infiltration, dirt, and insects.
Termite Shield
A formed sheet-metal barrier positioned beneath the sill plate to block subterranean termites from entering the wood floor framing from the foundation.
Girder
A heavy primary horizontal beam (made of solid lumber, built-up dimension lumber, engineered wood, or steel) that supports floor joists over intermediate spans between exterior foundation walls.
Crown
The high point of any curve, warp, or bow along the narrow edge of a piece of dimension lumber, which must always be oriented facing upwards during joist installation.
Dead Load
The permanent, stationary gravitational weight of the building materials, structural components, and fixed equipment built into a structure.
Live Load
The variable, transient, and movable weight supported by a structure, including occupants, furniture, stored goods, and environmental forces.
Built-Up Lumber Girder
A beam fabricated by face-nailing two or more pieces of nominal 2-inch lumber (2Ă—8s or 2Ă—10s) together into a single unit, with adjacent butt joints staggered by at least 4ft.
Laminated Veneer Lumber (LVL)
An engineered lumber product formed by bonding thin wood veneers under heat and pressure using exterior adhesive, with the grain of all layers oriented parallel to one another for high structural strength.
Glued Laminated Lumber (Glulam)
An engineered beam manufactured by gluing together selected lengths of kiln-dried dimensional lumber, manufactured in industrial, architectural, and premium grades up to lengths of 40ft.
Wood I-Joist
An engineered structural member composed of top and bottom solid or LVL lumber flanges glued to a central vertical web of oriented strand board (OSB) or plywood, providing high strength and spans up to 80ft.
Lally Column
A 4-inch cylindrical structural steel column filled with concrete, often featuring an adjustable jackscrew, used to support intermediate girders in basement construction.
Girder Pocket
A notch or recessed opening formed into a concrete or masonry foundation wall to seat a girder end, typically requiring a minimum of 4in of bearing and at least 1in of side clearance.
Firecut
An angular diagonal cut made on the end of a wood joist or beam where it enters a masonry wall, permitting the timber to pivot downward and collapse during a fire without prying or destroying the wall.
Floor Joists
A series of repetitive, parallel horizontal framing members (commonly spaced 16in on center) that carry the subfloor load and transfer it to the sill plates and girders.
Joist Deflection
The downward sag or bending of a joist under load, which building codes restrict to a maximum of 3601​th of the joist span under normal design live loads.
Joist Hanger
A formed metal bracket or stirrup fastened to the face of a girder or header to support and hold joist ends flush with the supporting structural member.
Trimmer Joist
A full-length, doubled framing joist positioned alongside a rough floor opening (such as for a stairwell) to carry the header joists.
Tail Joist
A shortened floor joist that spans between an opening header and a bearing foundation wall or girder.
Header Joist
A perimeter floor framing member (also called a band joist or rim joist) nailed to the ends of common joists in platform framing, or installed across floor openings to support tail joists.
End Joist
The outermost full-length joist installed parallel to common floor joists along the perimeter edge of a floor framing assembly.
Joist Nails (Stub Nails)
Short (121​in), heavy-gauge hardened steel nails designed specifically to fasten metal joist hangers securely into structural framing members.
Solid Wood Joist End Notch Limit
Building code limitation specifying that notches cut at the bearing ends of solid wood joists must never exceed 41​ of the total joist depth (e.g., maximum 221​in on a 2×10 joist).
Solid Wood Joist Edge Notch Limit
Building code limitation stating that notches along the top or bottom edges of solid joists cannot exceed 61​ of joist depth and are strictly prohibited within the middle third of the span.
Solid Wood Joist Bored Hole Limit
Building code requirement specifying that holes drilled through solid joists must not exceed 31​ of joist depth and must be located at least 2in from either the top or bottom edges.
Floor Truss
An engineered open-web structural assembly composed of horizontal top and bottom wood or steel chords connected by diagonal and vertical web members.
Connector Plates
Toothed galvanized metal plates hydraulically pressed into lumber intersections to join the chords and webs of parallel-chord wood trusses.
Backer Blocks
Lumber pieces cut and installed flush between the flanges of a wood I-joist girder to supply a solid, flush nailing surface for joist hangers.
Squash Blocks
Vertical dimensional lumber blocks installed between the flanges of wood I-joists to absorb and transfer concentrated point loads without crushing the web.
Rough Opening
The framed clear dimensions of an opening in a floor, roof, or wall assembly, measured between the opposing faces of the structural trimmer members.
Single-Layer Floor System
A floor construction assembly consisting of a single layer of structural paneling acting simultaneously as subfloor and underlayment, commonly used beneath wall-to-wall carpeting.
Two-Layer Floor System
A floor construction assembly consisting of a subfloor base layer fastened to the joists, topped by a separate underlayment layer to provide a smooth surface for resilient finishes.
Underlayment
A smooth panel material, such as plywood or particleboard, installed over a rough subfloor to provide a flat, seamless base for resilient flooring or tile.